Everything posted by YWHIC
-
AR pics, lets see'um!
PSA Lower with MagPul Grip DPMS MK-12 barrel 18" 1/8 Twist (rifle gas system) Troy 15" Extreme Spikes Upper Spikes BCG YHM Low-Pro A2 Stock Leveng Linear Comp/Brake MagPul MBUS Bushnell Trophy 3-9x40 XLT with BDC/DOA Reticle. PA Extended Scope mount. ..going to be my varmit/coyote gun in TX.. (click to make bigger)..
-
My first build
What I use around the shop is Black 500' Engine Paint.. matches most things close. I've had no issue with this ^^ thus far with quite a few builds rockin' it.
-
My first build
No problem.. sent you back the $$ to your card for the shipping. Heres another build for a customer with a DD 14 1/2" Lightweight and Spikes Dynacomp Extreme. and heres a snapshot of pin/weld on a BCM Battlecomp 1.5 for another build from today.. oh and what they wanted.. just awesome stuff.. MEGA Billet, Troy, VLTOR, BattleComp 1.5..
-
My first build
The factory Ranier dimple just catches the rear most on this particular Railed Gas block he had chosen. The regular low-pro type does align just fine as its got about 1/8" more gap between the set screws underneath. The test firing went great this morning (I used my A2 lower) at 8am, and will be shipped back to the OP Monday.
-
My first build
Just tore into it abit.. As you can see the Ranier dimple is slightly more rear-ward.. And you can see the 2 dimples I dug in with. Test fire in the AM.. I'll be using my A2 rifle stock to make sure it will function since that is what the OP is using (rifle type buffer).. Confirm all is well and RED Loc-Tite the setscrews in place. Should be ready to ship by Monday..
-
My first build
Just got the item in today.. will work this weekend to make sure all is 100% and GTG.
-
My first build
We'll be working to resolve this ASAP. Should be here tommorrow.. and no worries we'll make it right.. We did tighten the setscrews but did not dimple the barrel or loc-tite them. (some customers like to play with the blocks or change to a FF when they get the setup.) The Ranier barrel came pre dimpled for a low-pro GB and not a normal one.. so the single dimple is offset and only catches the rearmost screw from the GB.. Going to dimple the barrel for the setscrews, RED loc-tite them, re-check the whole thing, and re-test fire a few mags. Sorry to not respond sooner I didn't read the sub-forum till just now.. I have been in contact with the OP since Monday AM. So if anyone wants to order from us.. please make sure to specify in the notes to DIMPLE and LOC-TITE the selected Gas Blocks.. (not reflective on the OP as he did not know this would be an issue)..
-
(stupid) question about buying locally
Tell them to refund the deposit funds. Bring the cancelled check in with you and talk with the manager ONLY. They should really not have taken the order unless they could get it (or confirm they could) with-in say 3 days. IMHO.
-
New guy- burlington county
Welcome.. I shoot over at Range 14 alot. currently there are renovating the rifle side to be 21 lanes.. Can't wait for them to open that side back up.
-
New Member from Central Jersey
Welcome aboard.
-
favorite stock
Funny you mention that.. on my newphews build I had a case get stuck in the chamber.. (2 nd round) last Friday. That was with the MagPul MOE.. (pinned) Was able to mortor the BCG back.. but alas the cartridge lost the rim.. so had to goto the cleaning rod anyway. I think the pinning of it helped keep it from moving honestly.
-
what is your favorite AR foreend/ rail
The YHM lightweight does not make it like a MONO rail on top because of the small 1/2 or so gap on the top rail.. The Diamond is nicer but a bit heavier.. I'd get the YHM lighweight if I had to choose between the two.. or get a lightweight barrel profile and get the Diamond.. The finish is nice.. the special wrench for the lock-ring is like $20.. I have one here from doing them abit.. figured right tool for the job. Troy includes the barrel nut and special wrench in the box.. so I add another tool to my collection for builds.. Our FB page has pics of the 2 of the lightweights..
-
favorite stock
MagPul MOE (again for just pinning it anyway) got an A2 stock for my other build project.
-
what is your favorite AR foreend/ rail
my 14 1/2" BCM Middy has the MagPul MOE handguard and it works well and is simple. my other build is going with a Troy Extreme rail. my customers have been diggin' the YHM rails (mainly due to cost I think)..
-
Tactical Gear Pics..
RR.. didn't see the older posts.. not sure if a revival from April is a good or bad idea.. I also have an older class 2 vest to wear under this also.. granted its not Class 3 or 3A.. but its rated for most handgun rounds.. I was dabbling into some SAPI and ESAPI plates but decided for now I just want a simple rig to do the mag changes and maybe use when I get out to my 11 acre property in West TX..
-
Tactical Gear Pics..
Most setups have the mags, med-kit, admin kit with ID panel, some guys run Cellulome light sticks for marker lights at night.. The med-kits have usually a 'Israel' bandage with some clotting agent.. and basic suture sets.. I'm just starting out with mine so I am sure things will change.. I 'heard' on line that our Mil wear 4-7 mags, med kit, etc.. I planned on getting a med-kit and some energy bars and toss them in the SAW pouch.. I can fit a cheapy 5x5 or 8x8 tarp in there also if I fold it tight I am sure.. plan on a Camel Back hydration unit for my back 2-3 litre.. maybe others that run TRUE setups will chime in later today or tommorrow..
-
Tactical Gear Pics..
I couldn't find a GEAR thread.. and if this is in the wrong spot please move it.. My simple rig.. USGI Ranger 'Rack' USGI Triple M4 Pouch (holds 3) USGI Grenade Pouch (for whatever) Condor M4 Double-Triple Pouch (holds 6) SAW 200 (for whatever.. maybe a med kit) Condor Double 9mm Pouch (holds 2) BCM 14 1/2" BFH Midlength I pinned down my mags from 20 to 15 (for NJ).. though I need more mags to fill all 9 spots.. Anyone else got some goodies for Xmas along these lines??
-
How often do you clean your guns and do you enjoy doing it?
on my AR's after they are broken in.. about every 400 rounds I will take the BOLT out of the BCG and clean it and the firing pin.. otherwise I just clean the BCG off, and re-apply some 5-20 Synthtic motor oil. at about 1200 rounds with 0 issues thus far. I do a chamber brush after the Wolf WPA or Tula though.. stuffs a little more 'grodie'.
-
How Many Rounds Do You Shoot Per Month?
I shoot about 120-180 per outing of .223/5.56.. and try to go every other weekend.. during the summer I was going Sat/Sun and had burned 600 in 1 weekend outing with 2 AR's. about 1K for me of the 223 stuff's..
-
Lightweight 14.5 Upper For Ar Style Rifle
BCM has the 14.5" Middy in HF and Lightweight for $489 and instock.. $598 with PWS556 pinned on..
-
Mythbusters Misfire Fires A Cannonball Through Local Homes
did they BUST the myth??
-
looking for more detailed info on different types of ammo
FMJ = round nose usually and solid HP = Hollow Point, JHP = Jacketed Hollow Point SP = Soft Point. sometimes the 'tip' is POLY (is plastic). Wadcutters = FLAT lead bullets.. (old school casting techniques) Wildcat would be like a .400 Cor-Bon.. which is a .40 cal bullet necked down from a .45 ACP brass casing. (they got zing) the heavier the grain the heavier the bullet weight. In NJ the JHP/HP's are iffy, except to and from the range and should not be carried for any other reason. *all opinions are rough... others will be along to correct me I'm sure.
-
First day at the range with the AR
Nice.. my BCM 14.5" Middy shoots pretty good also.. managed this off a bag with the 'irons' at 50. and 50 yards standing and just banging away.. 12" Torso width with 4" center section.. what type of 'buffer' are you running?? Regular Carbine, or H1, H2, ??
-
Spike 14.5 Midlength + What Rail (to cover FSB)
A 10" Rail will leave about 3/4" to 1" hanging out from the 'shaved' FSB on a middy system.
-
Spike 14.5 Midlength + What Rail (to cover FSB)
A 10" would work with a low-pro GB as for example the YHM low-pro we utilize is just about 1" in 'length'and the shoulder on the midlength is 8 7/8" from the barrel/upper seat.. A Spectre Length YHM FF Rail comes to mind for use with that above scenerio, but would need to have the barrel nut removed.. The TROY MRF is another option and they make different sizes. The Troy MRF is the same to install just cut the delta-pack & end-cap, and shave the FSB. I did that on my PSA upper a few months back.. didn't want to mess with the barrel nut back then either.. If you 'shave' the FSB an 11" WILL work.