Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

YWHIC

Members
  • Joined

  • Last visited

Everything posted by YWHIC

  1. or have the supplier ship the upper to AA with the std A2 flash hider. get this service for $69. which covers the pin/weld and bayonet removal. and while ordering that.. grab this YHM Brake/Comp for $26.. and have them use that for the above service.. (less than $100 total).. I know BCM (most others) doesn't do the service of Bayonet lug removal.. hence the combo pack.. This would incude shipping the upper back to you complete and ready to go. (and compliant). ArmsNAmmo (sponsor) and ADCO also does this also.. FWIW.. **ETA.. I'll make it $80 flat (down from $96) if you want to do it.. and ship it back to you..
  2. From BCM's list you'd have to go with the PWS FSC556 and have them pin/weld that. that would be GTG for NJ. You'd still have to remove the bayonet lug upon receipt.. because thats an EVIL feature too according to NJ law. see this pic of my BCM 14.5" Middy I got last fall.. before.. After..
  3. The problem is your have an AR with a detachable mag and pistol grip.. so no flash hiders. If you didn't have a pistol grip (or a fixed non-removable mag) on your AR you'd be ok.. My Bushy (as noted in that post later on had a special comp/brake that looked like a flash hider).
  4. dtown223... keep in mind with the A2 front sight you may need to order the Bushmaster longer front post to work properly with the flat-top you have, as your front sight appears not to be F marked..
  5. So my new MK12 (DPMS Barrel 1/8 Twist and 18" Rifle Gas System) had an issue recently.. The Troy 15" TRX Extreme decided to loose its 'heli-coil'.. and Troy is discontinuing that line for the newer Alpha design that uses a standard mil-spec barrel nut (happen to have a few sitting here).. and are sending me the Alpha 15" FREE.. I also had to cut off the Levang Linear Comp to 'un-pin' it.. (cost $40 out the window).. so here she is naked so to speak.. I just did up the gastube with some low gloss 500' F black paint so it hides better under the incoming Alpha rail and put a YHM FH on for now to protect the threads (I live in PA folks).. I also ordered up the KIES Blast Master Comp/Brake from JoeBobs.. almost the same as the prior comp with a slight shroud over the very end and beveled in.. ($48 total with priority mail and discount code.) I called Troy yesterday and Jeff the return guy said there system has been down since Monday (my luck)... Hopefully this will all time in with Range 14 to re-open in a few weeks so I can test it out with good ammo I got sitting here.. Stay tuned..
  6. Be careful.. you can't legally have the BCM A2X FLASHHIDER in NJ.. The other option is to get the Carbine and get an H2 (or H3) buffer to slow things down on the recoil..
  7. If 16" go Middy.. if 14 1/2" go Carbine.. (this is subjective to my personal OP).. BCM offers the PWS FSC556 OPTION with pin/weld for $110.. which isn't bad at all.. Make sure to get matching length handguards.. I can run Tula in my 14 1/2" BCM Midlength but the last round doesn't ALWAYS lock the BCG back all the time.. A carbine would more than likely not do this.. then again I should know better than run super-bottom-bucket TULA.. Break in with NATO PMC or Federal NATO Brass before venturing into the steel cased ammo arena.. I do run Wolf WPA Mil-Classic for like $4 box with 0 issues..
  8. If/when Range 14 gets back up and running on the RIFLE side I'll be back out there in March also.. I met a few guys from here last August.. all I got is a Sig 9mm and AR's though..
  9. Grab the BCM upper (while you can) and grab the Spikes BCG from Aim for $110. somewhere along the line grab a matching/proper set of MagPul MOE handguards.. I run this abomination.. LoL.. BCM 14 1/2" BFH (Hammer Forged) Midlength on a PSA lower.. all MOE'd up.. and this cheezy 18" 1/8 twist SPR.. LoL.. of course the Troy Extreme on there is discontinued and mine stripped out.. so I await the new 15" Troy Alpha (FREE replacement from Troy C.S.).. also changing the Levang Linear Comp to the KIES Master Blaster Comp.. since I had to destroy the old one that was pinned.
  10. Just a note.. if you decide to build use caution with BILLET uppers.. some have square front edges that won't allow certain FF/Quad rails to mount up without some dremel-fu to the anti-rotation tabs and such.. Armorers wrench, vise block (clamb shell type), Torque Wrench, Vise with at least 3 1/2" jaws.. patience & good lighting..
  11. I spent an extra $100 for the BFH BCM also.. so I have to save $100 by using cheap Wolf WPA.. Lol I mainly shoot the PMC XTAC in 55 and 62gr.. the Wolf is here for when I run out of that.. The Tula was on the shelf at Wallyworld.. its definately dirty.. It runs fine.. but soft.. and 1 of 4 mag changes results in a non-stripped 1st round off the fresh mag.. so I'm speculating the BCG is catching on the bolt-catch and not the bolt-'face' as is needed to function 100%.. I won't be buying Tula ever again.
  12. The Wolf WPA is 223 55gr and works just fine on paper.. lol.. If you want to run 556 NATO ammo just make sure your CHAMBER is marked for such so you don't have any issues.. Federal AE 223 (black box marked Tactical) works fine for most and is on Cabela's website.. sometimes on sale for < $6/box..
  13. I start every AR on BRASS usually about 200 rounds or so.. then I try Wolf WPA (mil-classic box).. if it runs then I just run that and save the 556 NATO for real issues.. lol.. I don't run Tula as its got no kick.. and doesn't always run 100% in my BCM 14 1/2" Middy.
  14. YWHIC replied to Prax's topic in AR Discussion
    Nice.. keeping it simple to start and learn the basics (ie. Irons) is the way to go. Too many add a RDS (Red Dot Sight) 1st thing and then can't shoot with 'irons' Spikes Comp, Shaved Bayo Lug, and guessing pinned stock & mag also..
  15. Nice lower.. Take your time.. support the trigger guard ears with something.. and use BLUE tape to help prevent nicks when tapping in the roll pins.. Also,the only occasional issue is the hammer spring install.. 1 way works.. the other gives you a bang/click and light primer hits.. Keep us posted..
  16. Waiting for the OP to chime back that all was well..
  17. gotcha.. I have the wrench as I build uppers and I have the standard barrel nuts here also. I agree that Troy should throw in the $7 std. barrel nut and sub-out that Troy wrench for one with 3 nubs.. Then it would all balance out.. I paid $139 from PA late December for it.. (on sale).. the new Alpha one is $199 most places.. My only loss was the Comp/Brake at $40 that I had to destroy to get off... I broke even on this pretty much.. I'll do a review when I get it..
  18. Thanks for the kind words.. Getting ready for the move WEST to TEXAS.. we got a newer site with updated and new items.. We got some optics and added some Armalite, Colt, LMT uppers to our list also.. along with some BCM and DD barrel options for our in-house builds.. added some MagPul ACS stocks also.. The AA site will drop off after March 1st.. so you may want to mark the RGA. We'll still be processing and shipping from PA till later in the year however..
  19. Pizza.. was referring to what I read online about the trigger being heavy.. sorry OP.. I figured the OP may want to physically handle one before committing.
  20. How bout a Ruger SP101 in 3" and 357 flavor.. I read the S&W 13 had a VERy heavy trigger pull.. hence the suggestion above.. I'd say 380 LCP would be next.. I miss my KelTec 32 for pocketabilty.
  21. I carry in PA at 1-2 o'clock position.. One girls boyfriend commented.. "nice to know in case we fight" and I said.. "yeah but thats only the 1 pistol.." always an arse in the crowd.. needless to say I haven't seen that couple in 4 years.. and last I talked she dumped him.. lol
  22. Just read Troy's website.. ** Troy is upgrading the TRX Extreme to the Alpha Rail. Within the next 60 days, previous TRX Extreme purchases will be shipped with the upgraded Alpha Rail. The TRX Extreme rail will no longer be available for purchase. ** ordered the last Levang Linear Comp I could find and a regular barrel nut (which I have here).. should have it all back in working order in 5 days or so..
  23. What parts?? It uses a standard barrel nut.. not the Troy proprietary.. they said I can keep the rail sections also.. **ETA the Levang Comp is shot.. can't get the pin out of the devise.. and of course everyone is out of them..
  24. 2 years ago my BOA debit was jacked for $238.. sucker even used overnight shipping.. (to somewhere in NJ).. (they fixed it). 2 weeks ago my BOA business debit was jacked for $.99 and then like $30.xx from AL and then NV.. BOA froze the card overnight.. just got my new card.. I buy alot online so I am thinking somewhere there is a leak.. I shop Cabela's, Midway, Amazon, DSG, etc.. to just about anywhere with a good deal..
  25. I bought a Troy 15" Extreme about a month ago for my 18" SPR project.. Today I decided to add a rail section to it.. and FAIL.. the heli-coil for 1 screw underneath decided to pull out.. on the mounting point. now the GOOD news.. Troy is sending me the 15" Troy Alpha as replacement. The bad news is the Alpha uses a factory barrel nut.. so the Troy barrel nut had to come off with my pinned comp/brake.. The good news is I didn't destroy my Levang Comp or the barrel.. and I can reuse and re-pin.. (I gotta weld the pin in again anyway).. +1 for Troy CS..

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.