Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

NJ Legal Muzzle Devices to Add to 14.5" Barrel

Featured Replies

I'm looking for suggestions on a NJ legal muzzle device that can be pinned and welded to a 14.5" barrel (1/2-28 TPI) to get to 16+ inches. I'm leaning towards a KVP or something along the lines of a linear comp vs. a brake. Let me know what you guys have experience with and recommend. Also, it is helpful if you know for sure it'll add the necessary length to reach 16 inches, but I appreciate any suggestions. I can always do math or hound the manufacturer to find out.

Also, a second question I'm sure some of you here will be able to answer. I've seen some muzzle devices that are titanium. Can a typical gunsmith weld a titanium device to a steel barrel? I know very little about welding, but it seems like that might be more challenging if not something that can't be done easily. It is however something I might consider to keep the weight at the end of the muzzle down if it's an option.

  • Author
5 minutes ago, CapGuns&SnapsKid said:

https://www.midwayusa.com/product/102204140

 

This is what I used... perfect for 14.5 build

Thanks. I've looked at that one too. I've seen this setup too, which is getting pricey.

 

https://www.tacticallink.com/griffin-armament-vg6-precision-cqb-blast-shield-kit.html

Actually, this is the one I saw, which isn't nearly as hard on the wallet:

https://www.wingtactical.com/firearm-parts/ar-15/muzzle-devices/vg6-cage-blast-diffuser-device-for-gamma-epsilon-muzzle-devices/

14 minutes ago, USMC1341 said:

I'm looking for suggestions on a NJ legal muzzle device that can be pinned and welded to a 14.5" barrel (1/2-28 TPI) to get to 16+ inches. I'm leaning towards a KVP or something along the lines of a linear comp vs. a brake. Let me know what you guys have experience with and recommend. Also, it is helpful if you know for sure it'll add the necessary length to reach 16 inches, but I appreciate any suggestions. I can always do math or hound the manufacturer to find out.

Also, a second question I'm sure some of you here will be able to answer. I've seen some muzzle devices that are titanium. Can a typical gunsmith weld a titanium device to a steel barrel? I know very little about welding, but it seems like that might be more challenging if not something that can't be done easily. It is however something I might consider to keep the weight at the end of the muzzle down if it's an option.

I have one on my 14.5..can't recall the model..i know no help...ill try to recall...what i do know...is that one i did get was undersized and would not make the plus 16..

 

The lil bit of weight you think you might have is very negligle....  stick with steel..imo

My 14.5" Midlength has a Spikes Dynacomp pinned on. It's spec'd so that it will meet the 16" minimum when pinned on a 14.5" barrel.

https://www.primaryarms.com/spikes-tactical-dynacomp-extreme-compensator-1-2x28-sbv1017

There's also a KAK Flash Can that will meet the minimum too.

https://www.primaryarms.com/kak-industry-slim-flash-can-1-2x28

Titanium can be welded to stainless steel using pure argon as a shielding gas. Titanium can be brazed to steel but its not easy. 

On my 14.5 I use the BCM comp 

  • Author

@Zeke & @fishnut Thanks guys, do you mind posting a link to the BCM and SureFires  you used?

@JT Custom Guns I've seen you referenced on here multiple times for quality gunsmithing. I may have a job for you soon! I have a barrel on order, just need to decide what to weld to the end and order that too.

1 hour ago, USMC1341 said:

@Zeke & @fishnut Thanks guys, do you mind posting a link to the BCM and SureFires  you used?

@JT Custom Guns I've seen you referenced on here multiple times for quality gunsmithing. I may have a job for you soon! I have a barrel on order, just need to decide what to weld to the end and order that too.

https://www.surefire.com/muzzle-devices-education/

got mine from optics planet on sale

  • Author

Thanks guys.

Does anyone know if the KVP standard linear comp is long enough to make a 14.5" barrel a legal 16"?

Or if I go KVP do I need to go magnum 3.25" (the obvious "safe" answer).

The standard KVP is 2 1/8". Doing the math and assuming .625" subtracted for the threading, that puts it right at 16". Pushing it pretty close it seems.

https://www.kawvalleyprecision.com/KVP-Linear-Compensator-p/kvp-linear-blk.htm

Just wondering if anyone's built a rifle with this one and measured.

vg6 gamma 556ex will extend right to 16"

F&N tactical makes a knock off that I've used at less than half the price on some cheap builds

I have the VG6 Gamma on my build, it's an awesome break but it's loud as fuck.

OK, stupid question. For something that's turned and milled on CNC, why are these so expensive? 

  • 2 weeks later...
  • Author

I'm probably going with one of these. Apparently the 2.25" according to KVP is legit to take 14.5 to just over 16.1, but availability is scarce, so I might end up doing the 3.25 incher. I already have a rifle with a loud ass break, and was looking to do one that was a little less blasty.

https://www.kawvalleyprecision.com/category-s/151.htm

On 8/3/2020 at 5:09 PM, Grapeshot said:

OK, stupid question. For something that's turned and milled on CNC, why are these so expensive? 

Running a engineering and production business isn't cheap.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.