Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

rauchman

Members
  • Joined

  • Last visited

Everything posted by rauchman

  1. I don't know where you are in NJ. I live up in the northeast. Around here, the Bullet Hole, by far, has the best prices. Other gun shops, such as Meltzers and Ramsey Outdoor are considerably higher in gun and ammo prices. A small but decent gunshop in Cliffside Park/Fairview is pretty good on the Tactical type stuff... Mike's Gun Shop. I was down there in '94, but I remember Calzo's (spelling?) in Jersey City as having pretty good prices at the time. Again though in this area, Bullet Hole has THE best prices. Also, they have a pretty good assortment of used pistols as well. As a side note, I have to agree w/ the other folks who recommend something other than a .40 as a 1st handgun. My 1st handgun was a Beretta 96 Centurian (.40). I thought I was all badass w/ owning a .40. I quickly discovered that A.) ammo was more expensive than my wife's Beretta 92FS (9mm) and that B.) I was focussed more w/ the snappy recoil than accurate shooting. I've since sold that pistol off along w/ most of the 40's that I've owned. I primary shoot 9mm, followed by .22lr and then .45acp. I still have 2 pistols I own in .40 (CZ75SA and S&W M&P40), but would rather shoot other stuff that I own. If you are set on the .40, I'd recommend, if going for a polymer frame, S&W M&P40, SigPro, HK USP. I've owned a Glock 22 (standard .40 fullsize pistol that A LOT of LEO's carry) and thought the recoil was amplified in this pistol. The NEW Glocks, the Gen 4 Glocks, are supposed to be better in the recoil department, along w/ other updates to the pistol. If you are open to metal framed guns, Sig P226 & P229 and CZ.
  2. Greetings, I have an itch that needs to be scratched and that itch says Gen 4 Glock. I've been following multiple threads on the Gen 4 Glocks. Have to say, the new Glock is really putting a tickle in my pants From all reports that I've read, it's supposed to be more comfortable using the built in backstrap (which I understand is SF sized), the mag release is supposed to be easier to get to, the new texturing is supposed to be better, and recoil management is supposed to be better w/ the new dual recoil spring. I understand the barrel, slide, frame, mag release assembly and recoil spring are different on the new models and are not interchangeable w/ the Gen 3 and previous. However, most of the rest of the internals are. Also, mags from Gen 3 and previous will work. Some history - My 1st Glock was a G22 that I had purchased in '99 or so. I thought a 15 rnd .40 was bad ass. However, I quickly discovered that I wasn't that big of a fan of the recoil characteristics of the .40 in this gun, the finger grooves didn't work that well for me and on every shot, I'd have to reset since the gun would slip in my hands. I sold it and bought a used 2nd gen G19 a year or so later. I LOVE that pistol. Later I picked up a used 2nd gen G17 w/a trigger job. I can shoot that pistol as well as my Sig P226 on a good day (on slow fire, this would be 5 rounds into 1" at 15 yards), and can double tap / rapid fire it a lot easier than the Sig. This past May I picked up a 3rd Gen G19 w/ Austrian proofs. Really really like that pistol. Last Jan, I picked up an XD45 Tactical and XD9 Tactical. While I like the XD45 better than the XD9, neither of them did it for me. In wanted to try something different, I picked up a used M&P40 w/ night sights from the Bullet Hole last Dec. After working the trigger as per Dave Burwell's instructions (this took care of the crappy grittyness and gave a slightly lighter pull weight and slightly better reset), then added the Apex Tactical sear (this gave a dramaticaly lighter pull weight and much better reset). However................................. aside from HK plastic ( I have a USP45F that is my uber pistol, have handled a USP9C that I immediately fell in love with, and of course the HK45 and P30 are light years ahead of any pistol out there in terms of comfort), my favorite polymer is still the Glock. It just works for me. So now the question is..... I have 2 permits I've been itching to use. One was going for a G26. I'm wondering if I should hold off and wait for the Gen 4 G26. I may try my hand at a G22 again. I'd love love love to get a G17, but the whole neutered to 10 rnd mags does not sit well with me. Any tips on how to convert G17 17 rnd mags to 15 rnds?
  3. Funny you mention that. I just discovered Guns 4 Hire on this website.
  4. Excellent and thanks for the info!!! Ken
  5. Wow, this is fantastic. How does one go about signing up for classes? Is it through the Sig site or do I sign up w/ your facility? I've been really interested in taking some kind of training. Thanks, Ken
  6. Greetings, My New Years resolution is to get some kind of firearm's training this year.... and to compete in the GSSF match this year as well. I can shoot fairly well shooting from a static bench, shooting at paper. My good day would be shooting 5 rounds slow fire into 1" at 15 yards w/a given pistol. I average around 2" shooting the same distance, # of rounds. Obviously, some pistols work better than other's for this. Anyway, can someone recommend a training facility where I could learn some pistol/rifle craft? I'd prefer going to someplace w/in 4-5 hours driving distance and of course $ is something that needs to be considered. Is there anywhere in NJ that offers good instruction?
  7. I used to play in a band and still play guitar and write music. Just started jamming w/ some old band mates again. The wife and I both ride motorcycles. She's got a 2003 Kawi Z1000 and I'm running a 2007 Suzi SV1000S. I came off a Yammie Roadstar and am thinking of going back to a cruiser, or at least something more comfortable. We've done trips up to Nova Scotia, Montreal and Niagara Falls. In 2003 my grandparents moved out to AZ. We decided to go out and vist and while we were out there eloped on a hot air balloon near Cave Creek (near Phoenix). We rented 2 HD FatBoys and rode up to the Grand Canyon for the honeymoon......... that was pretty f***ing cool!!! Got my 1st house a year and a half ago and that seems to eat a lot of time up. Planning on taking some kind of pistol/rifle class this year. Really want to try my hand at GSSF this year as well. Also, want to get into HAM radio stuff. Plan on getting my license at some point this year. Completed my CERT training last December. The wife got layed off from Old Navy last March and she's just completed her EMT training.
  8. rauchman replied to crazyboy's topic in Handguns
    This could bring me back to the XD fold!!!
  9. Call up Springfield Customer Service and give them your credit card number The question is whether or not the XDM mags are available in 15 rounders. Yup, this is what I did. I bought them straight from SA. Before the XD9, there was the HS2000 (same gun as the XD9, but was marketed through Croatia, and this gun came w/ 15 round mags). As for XDM mags,..... you got me there.
  10. Greetings, Lots of great advice already given. If I were you, I would go used on my 1st pistol. This way if you don't like it, you can pretty much sell it for what you bought it for. Definitely go 9mm to start. I would say get 2 pistols.... a 9mm and a .22lr ( or a .22lr conversion for your 9mm). As to which pistol.....that's a very personal thing. If you have mediumish sized hands, the Beretta may be big. If you like metal pistols and the Beretta is too large, I would heartily recommend a Sig P22X (this would include a P226, P228, P229). CZ's are also really nice. Exceptionally accurate, but more crudely constructed (at least mine is). In 9mm, I own a Beretta 92FS, Sig P226, HK P7, Walther P5, Glock 17 and 2 Glock 19's. I have owned an XD9 Tactical and a Browning High Power and I just didn't jive with either of them. Of them all, the Sig P226 and the Glocks would be the last to go. For my wife, the Sig would be the very last and for me the G19's would be the last to go. Glock's were very hard for me to learn how to shoot well. I shoot them considerably better than I used to, but I still outshoot anything else I own w/ a Sig P226. Keep in mind, this is all slow fire... firing 5 round groups at a static paper target. If you get into more "tactical" style shooting w/ running and gunning, the merits of the Glock come to the forefront..... Glock's consistent trigger w/ great reset and low bore axis contribute greatly to fast firing. The S&W M&P is also a contender here, but I have to say w/ the caveat of a trigger job. I'm not familiar w/ stores in south NJ, but the Bullet Hole in Belleville, has a pretty extensive listing of used pistols. Last time I was there, they had 3 G19's at different price points, the cheapest being a 2nd gen w/ stock sights for $350 or so. They also had a used CZP01... very very nice 9mm metal pistol.
  11. Tried doing just that last week. Called S&W's CS and they were unable to tell me if shipments had started w/ the 15 rnd mags and if they were shipping, which stores had received.
  12. Born in CA, lived in NJ 5 days later. Lived between Hudson and Bergen county my whole life. Just got my 1st house in June 2008 and don't see myself moving anytime soon. All my family up and left to CA and AZ between 2002 and 2006. I love CA, but hate the political climate. I've visited AZ at least once a year for the last 7 years and it's ok. I like northern AZ better than south, but there is not what I would call a great economy in north AZ,..... or south AZ for that matter. Colorado and Oregon sound really interesting, but recently have taken an interest in seeing North Carolina as well. I hope to be out of NJ w/in 10 years. If the political climate changes in NJ, my desire to leave NJ may change as well.
  13. Keep in mind, S&W is now making 15 round mags for the fullsize frame 9mm M&P's.
  14. Do you know if S&W started shipping the M&P9 fullsize pistol to NJ w/ the 15 rnd mags? I have 2 permits ready. One is for a G26 and the other is going to be used on either a M&P9 or M&P9c. The 15 rnd mag will be the determining factor.
  15. Will check out DB's site - thx Another thing I remembered.... On Youtube.com, Apex has video instruction for installation of the sear. Bascially, dink out the roll pin near the beaver tail. I used the 1/8" roll pin starter punch for this. Does not matter which side you punch out from (left or right). Once the rollpin is out, pry up the trigger group housing ( it's very easy using the 1/8" punch). Pulling on the trigger helps alleviate pressure here and makes it a lot easier to lift out. Once trigger housing is out, the ejector just pops off. Keep the housing on something level (a table works) and keep the sear side up. Use the 1/16" punch to push out sear pin. There should be no real resistance taking the pin out. Remember, keep the housing sear side up since there is a small detent and spring UNDER the sear. If the housing is kept sear side up, the small detent and spring shouldn't come out. Once the sear pin is out, just lift out existing sear. Replace w/ Apex sear and put sear pin back in place. Put ejector back on left side of trigger housing and fit trigger bar into slot on right side of housing. There are guide detents in the frame that the housing slips back into. Again, play w/ pulling the trigger as it will alleviate pressure on the trigger bar and make trigger housing installation back into frame easier. Once trigger housing is back in frame, do a couple of dry fires to make sure everything is syncing together. Don't forget to put the roll pin back in frame near beavertail. All should be good. Be aware though that if you have a gritty crunchy trigger, I don't believe changing this piece will address the gritty trigger. I've done this process a few times now. When I installed the sear last Sat. morning, it took all of 5 minutes or less.
  16. If you want a MUCH more pronounced reset, but don't want a lighter weight trigger, do add the Apex sear AND the Mass. compliant spring. I understand this combo has been the closest thing found to mimick the stock Glock trigger.
  17. The process is easier that I thought it would be. Best advice I can give is, go to Dave Burwell's site to get instruction on the home trigger job. This will show how to remove trigger group, take out sear and replace. Having a 1/8" roll pin starter punch and 1/16" pin punch was very helpful.
  18. Greetings, I had picked up a used M&P40 from the Bullet Hole in December. It had, as other M&P pistols also have, the worst stock trigger I've ever felt. I learned about the Dave Burwell (recognized M&P trigger guru) trigger job that he has listed on his site, and did it to my pistol. The trigger job included... 1. Removing material/reshaping/polishing the sear where it engages the trigger bar. 2. Removing some material/polishing the top side of the sear where it holds the striker. 3. Polishing the striker on all interface points where it is held by the sear. 4. Polishing all interface areas of the trigger bar (sear engagement area and firing pin safety plunger engagement are. 5. Rounding / polishing the firing pin safety plunger. The results of this effort were - slighly lighter trigger release weight, slightly more noticeable and pronounced reset and, the biggest effect, the removal of the gritty crunchy trigger (this was the effect of rounding/polishing the firing pin safety plunger). The trigger was smooth, with only the break being the resistance felt. I received the Apex Tactical hardened sear last Fri and installed Sat morning in anticipation of a shoot at Bullet Hole (which was closed due to a death in the family). The results of this effort were - very noticeable drop in trigger break weight (they say it should come in around 4lbs, I think mine is lighter still since I worked other components of the trigger system), and very noticeable reset. Reset is now audible w/ a pronounced click. In looking at the Apex sear vs. the stock sear that I had worked on, the Apex sear has a considerable amount more material removed from the trigger bar engagement area. When I find a Massachussets compliant trigger spring, I'm going to install w/ the Apex sear. I've been reading that this makes the M&P's trigger much more like a Glock's trigger (which I prefer). This means a more weighted, but smooth pull and release, and a powerful reset. I'd feel much more comfortable if this pistol had the thumb safety w/ this light of a trigger pull. Overall, I have to heartily endorse the Apex sear. It did exactly what it said it would do. Lighten the trigger to about 4+lbs and make the reset much more pronounced. If I get another M&P, the Apex sear will go in it.
  19. Greetings all, I've started trying to do both eyes open when shooting and am becoming quickly aware that I fall into the right handed shooter, left eye dominant category. Any tips on how to work with this?
  20. Good to know.... thanks!!!
  21. Yup, as the others have mentioned, you're doing it right. I notice for me, on my Beretta 92FS, I have to have a really solid grip on the gun to have accurate shots. Otherwise I pull the shot to the right pretty easily. Some guns I don't have to have as much grip pressure and I'm fine. Not so w/ the Beretta, but I think also, that individual hand geometry plays a big part in the "grip". Also, regarding the M&P, I just ordered a sight pusher from S&W to start experimenting w/ trigger jobs. I've read the Trigger Job How To on Dave Burwell's site and am going to give it a try. I understand reset is supposed to be improved somewhat by what he recommends. Let me know if you want to borrow the sight pusher for your M&P. It should be here by the end of the week, and I'll be shooting this Sat at the Bullet Hole to see how my trigger job is.
  22. Greetings all, Just thought I'd share some most excellent info I just came across. For all you M&P9 Fullsize lovers out there (Mikeyboyeee you come to mind) I just got off the phone w/ S&W to order a sight pusher tool for the used M&P40 that I picked up a couple of weeks ago. In conversation w/ Paul (a very pleasant and helpful S&W customer service rep), he mentioned that S&W now has NJ legal 15 round 9mm mags for the M&P9. :clap: :clap: Part # is 39498 He did mention that newer M&P9's should be shipping w/ this magazine to NJ dealers.
  23. rauchman replied to matt6669's topic in Handguns
    I've owned an XD45 Tacitcal and an XD9 Tactical. I prefered the XD45T. I could shoot it considerably more accurately and as was mentioned.... 14 rounds of .45 puts a smile on my face.
  24. I've got one. I'm in Teaneck, Bergen County. Can be reached at 201-906-2485. I don't have the front sight socket type tightener though.
  25. Greetings, I did own one from '99 to 2001 or so. If you like it, it is an outstanding pistol. I am an internet commando and like the tacticool guns. 15 rounds of .40 w/ a standardized rail (at the time I got mine, I believe Glock was one of the few offerings that had the standardized rail) sounded great to me. However, I personally wasn't that crazy about it. I thought it was exceptionally snappy in .40. Shooting it one handed, I got a lot of torqueing in the hand. Shooting it w/ both hands, I didn't think it was all that accurate. In fairness, this was my 1st Glock and at the time, I really wasn't used to the Glock trigger. Also I wasn't as good a shot then as I am now. Regardless, it was considerably harder to get a good group as compared to a P226 9mm or Beretta 92FS that I also owned at the time. Ultimately, the pistol just didn't do it for me. This was the 1st pistol I sold and learned that there are some pistols that just don't work for me. These criticisms are all subjective and I'm sure there are lots of folks who love their G22, and G23's for that matter. The only Glock .40 I'd consider is the G35. Having said that, I love the 9mm and .45 Glocks. I do believe the 9mm Glocks are some of the best 9mm offerings out there. Off all the Glocks, it seems the .40's are more problematic than Glocks other offerings. I understand Glock has revised the chambers on the .40's to address the KaBoom reports. I've read numerous reports of G22/23's having cycling problems w/ lights attached. I understand the Gen4 Glocks are supposed to address this problem as well. As for my favorite .40, right now it is the M&P. It recoils much more favorably and is easier for me to be accurate on. Having said that, I do think Glock has a much better stock trigger.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.