Everything posted by BigHayden
-
A 1911 that works correctly is just as rare as a Glock that doesn’t
The 1911 was the Glock of the early 1900's. It went something like 6000 rounds without a failure during the military trials, but it wasn't exactly accurate. The rise of practical shooting caused smiths and manufacturers alike to pursue tighter tolerances, making the 1911 more accurate, and consequently, more finicky. Glock had the benefit of modern manufacturing to make his guns both reliable and accurate. As an aside, does anybody else wonder what JMB would have been able to do with today's technology if he were alive? The man's genius is still evident in guns made today, almost a century after his death.
-
Looking for a New Range to Replace Hague's
Ed was a good guy. I transferred my CBOB through him a few years ago. Last time I saw him was up at the OGAM hearing in Trenton.
-
What part of a DIY gun is the registered part?
It's only illegal if you get caught. That's the way I understand NJ laws work. Just kidding (before anybody gets their knickers in a twist).
-
Looking for a New Range to Replace Hague's
OK, I'll bite. What's wrong with joining the NRA? And what gun rights organizations do you belong to instead of the NRA?
-
Who's on twitter?
With Twitter, you have to have an account to follow people. Some of the gun related stuff is amusing, especially from the anti-gunners. I'm on there as @JohnAHayden
-
STS-33
I was under the impression that you have to have an FPID to get a HPP (P2P, as has been noted here). The only exception is when you initially apply for your FPID, you can apply for HPPs at the same time. Edit: I'll leave my original post, but I'm adding that now that I reread the OP, I think I misunderstood his question the first time. Move along, nothing to read here.
-
NIMBY in South Jersey upset by Gun Shop
I might go visit Rayco this week. Toss a little business their way just to rub it in this woman's face. I like the one quote at the bottom, "And what kind of town do you want your town to appear to be?" The answer to that question is simple. An American town.
- CBS2
- CBS2
-
Which is more debated?
Fixed that for you.
-
First time NJ gun purchaser questions
Not many people shoot sporting clays with handguns.
-
SB Commercial Didn't See it
It was a regional thing. It only ran in D.C. What does that tell you about the target audience?
-
Pistol Permit Question - Typo?
I've had this happen before. Picked up a permit and went straight to the store, where I saw the mistake. I took it back right away (this was 7:00 PM) and the officer at the desk made the correction while apologizing profusely. They should fix it for you without any hassle.
- Big Thanks to j0n and Tom from nj2as
-
Retired LEOs Targeted
So which is it? Are you going to carry or not? First you say you don't need to, and then you say you will. Are you sure you're a cop and not a politician? Nobody's "hating on you because you get to carry". We are all frustrated that because you got yours, you leave the rest of us to fend for ourselves. This is the same divide and conquer bullspit that the anti's pull when they go after "assault weapons" and the Fudds don't stand with us. We chastise them for the same behavior. I'm sorry if it hurts your feelings that others are upset about their rights being trampled on and many LEOs don't seem to care because they have the rights the rest of us are fighting to get back. This is the same as telling a black man in the south during the 1950's that he just be white and stop complaining. Rights belong to everyone regardless of your profession or skin color. Hopefully you aren't driving while typing on your phone, as that would be illegal. 6 pages and 100+ posts and what I'm hearing from us peons is that we want you to stand with us and fight to get our rights restored and not abandon us, and look down on us, because you have yours.
-
Christie on "Ask the Governor " this evening.
Didn't Frank post a list of questions for us to use on the next Ask the Governor? I seem to remember getting an e-mail or something with 5 questions that were worded very carefully so as to extract a specific answer.
-
Big FAIL for Old Bridge PD today
According to the letter from the NJSP, they cannot limit the number of permits you can apply for. If they are truly low on actual paper permits, I suppose that would be a legitimate reason for doing away with the whole HPP system before they spend more tax $ to print new ones. It also makes me wonder. Does the NJSP Firearms guide book instruct departments to run low on physical permits as SOP?
-
Doomsday Preppers
10 days? You're overly optimistic. It's more like 3 days. Remember Katrina? Complete social dislocation in 72 hours. Supermarkets were empty and roving gangs were looting homes. Up here every snowstorm clears out every supermarket in the area. I might even be overestimating saying 3 days...
-
Grip safety issue
It sounds like not enough of the grip safety is blocking the trigger bar to your satisfaction, though I'm not sure that it's "unsafe". My DW CBOB would "fire" if you pulled the trigger and breathed on the grip safety. I did some research and I did a few things to correct my issue. I peened the part of the safety that blocks the trigger (lay the part of the safety that blocks the trigger on an anvil and whack it with a hammer to make it "thicker" top to bottom) to make it engage more positively. I bent the right leg of the spring out a little bit to provide more pressure on the grip safety. And I filed the bottom "lip" of the grip safety (the part that catches the mainspring housing as the safety pushes out) to give the safety a little more purchase on the back of the trigger bar. All three of these things were done to a very minor extent, but they fixed my safety issue. HTH.
-
NJ ASSEMBLY COMMITTEE TO CONSIDER AMMO BAN & MORE!
I love the people bagging on ANJRPC, claiming they haven't done anything. Are you aware that they have 2 good lawsuits working their way through the Federal courts as we speak? Our carry case, Muller vs Maenza, is likely to be the first clean case to make it to SCOTUS and will likely be argued by Alan Gura when it gets there. The other is the OGAM challenge, which I'm not sure is destined for SCOTUS, but has the potential to be game changing for us. But I guess that's "nothing" to you guys because we still have draconian gun laws right now. We lost our rights a little at a time, and it will take a lot of time and a lot of money to get them back. You don't like the NRA or ANJRPC? Fine. Are you a member of SAF? What about NJ2AS? Are you sending them the same money you would've sent to the NRA as membership fees as donations to their legal funds? If you aren't doing anything, we're just dragging your asses on our coattails. I'm a life member of the NRA and SAF. I'm an annual member of ANJRPC and NJ2AS. I throw a couple bucks to SAF's legal fund now and then and I'm going to throw a few at NJ2AS too. I always call and send typed letters to my reps to let them know that I am pro-rights and that I expect them to be as well. If all you are doing is bitching on an online forum, then you are right and a self-fulfilling profecy will come to fruition, and nothing will ever change. I learned something interesting this past election. Public workers unions in NJ have always been viewed as this super voting block, and that they alone decided who got elected in NJ, and their membership is in the 400,000 range. Then some Democrats voted for some bills that they didn't like and they vowed to oppose those politicians, including high ranking Democrats like Steve Sweeney. Then the election came, and all those Democrats were voted back in. Think about that. The most powerful voting block in NJ couldn't vote out a single representative. And gun owners outnumber them 2 to 1. Imagine if we did more than just concede defeat in an online forum and actually contacted our representatives to voice our opinions. Many people on here believe that anti-gunners call the reps and flood them with praise for stupid bills like these. The truth is, most people can't be bothered, and I don't believe that anti-gunners in NJ are that politically active (except Bryan Miller). But since just as many people on our side believe we can't do anything, they don't even try. We need to all get involved, even if we don't get our way this time. Cemetary is right, we did beat back the .50 ban. And we beat back the OGAM attempt twice before a late night, back room deal got it passed. Since then, I believe we have gained momentum and things will change, eventually, for the better. There will always be anti-gun politicians proposing anti-gun bills. We just need to remain vigilant and vocal in our opposition.
-
NJ Ammo-Ban
If this does pass today, it would only be passing out of a committee in just the Assembly. It would still have to pass the whole Assembly and the Senate, and then Governor RINO would have to sign it. I'd like to see these bills DOA today, but if they aren't, we will have plenty of time and places to fight them.
-
Question re CCW applications
Rejection of a purchase permit is not up to a judge. I think you misunderstood bulpup's post. Bulpup, I don't think there's any harm in asking, but be prepared for an antigun screed. When I asked about the ammo that our cops carry, the chief told me that I wasn't allowed to have them, since they were hollow points. I did correct him, politely, and it did change the conversation to a more favorable one. But just be prepared.
-
Which 1911 9mm in the $650 range?
Did anybody tell you the Ruger doesn't come in 9mm? :thsmiley_deadhorse:
-
Picked up my first handgun (1911)
Well, my MIM replacement mission started when I wanted to add a memory bump grip safety and a tactical thumb safety (Ed Brown parts) after I bought my CBOB that had those parts installed. Then I decided to make the Kimber match the CBOB as much as I can, which means replacing all the MIM stuff. I'm not completely against MIM stuff, but I just wanted him to be aware that all the parts weren't forged or cast.
-
Picked up my first handgun (1911)
I love 1911s too. That Kimber is pretty. Just so you know, the SA TRP is 100% American made too; that's the FBI Hostage Rescue Team pistol and SA doesn't make those frames in Imbel. The Kimber does have a significant number of MIM parts and that silly Swartz safety. Not that either of those things are a major issue, but just be aware of it. I'm on a mission to eliminate all the MIM in my Kimber and replace it all with forged parts where possible. Good luck with it.