Everything posted by Pizza Bob
-
Sellior & Bellot buckshot
I've met Ray, which is why I thought it entirely possible
-
travel to permissive carry state
Not sure where you got that, Maks, but it's based on residency, not place of business. To qualify for a PA non-residnet license, you must have a license from your state of residence, if they issue them. NJ has license laws in place, even though they are a defacto no-issue state, which means you would have to have a NJ license before you could qualify for a PA non-resident. In the very near future PA has a new licensing system going into effect, which will require the applicant to come to PA to get their non-resident license. I believe this goes into effect in May. Centre County Sheriff Dennis Nau used to be the "go to" guy for non-resident licenses by mail - no more. Adios, Pizza Bob
-
Two options for HD..
Not to be egotistical, but given the time stamps on these posts, I have to think that my response here... http://njgunforums.com/forum/index.php?/topic/22731-sellior-bellot-buckshot/page__pid__302888#entry302888 ...may have been the impetus for this thread. My feelings are expressed in that reply, which thus far seems to dovetail with the other posts here. Adios, Pizza Bob
-
S&W Model 642
While I can understand your desire for a hammerless snubbie, I think the 642 is less than desirable. You are coupling a relatively heavy DAO, with a very light (15 oz.) gun. At contact distance this will make very little difference, but in a situation where there would be some distance and adequate time, I'd prefer the option of SA fire and the attendant lighter trigger pull. In this instance you can have your cake and eat it too. Look at the 638. It gives you a shrouded hammer for snag-free carry, but allows SA fire if possible. DA would be the same with either model, I just like the option of being able to go single action. I changed out the Uncle Mikes Boot Grips (OE at the time) for Hogue Bantams, which are slightly lighter. Not a range gun, but I have others that are far more painful to shoot. JMHO Adios, Pizza Bob
-
Sellior & Bellot buckshot
Wait a minute, let me get this straight, you were doing house clearing drills (in your home I presume) with LIVE ammo in a loaded shotgun at 3 AM in the morning???????? Sounds like an accident looking for a place to happen. As much as we may malign LE for one thing or the other, clearing a house is a job for them, not a civilian with a gun. Your job is to hole-up and call the police and use your weapon defensively to protect you and your family, until the police arrive. If you were doing this as practice for gaming, there are better places to do it than your house with a loaded gun. If I have misconstrued, I apologize, but maybe you should clarify. Adios, Pizza Bob
-
Looking for a place to shoot
You may want to consider looking to the west, to free America. You have Falls Twp., Langhorne and Bucks County F&G all have clubs within 20 minutes of Mercer County. Falls has a waiting list - not sure about the other two. Not cheap, but not too bad, given the area. Be prepered for things like number of rounds in the mag and no rapid fire rules - again, seems to be the norm for this area. Langhorne was probably the most forward thinking, esp in regard to EBR's, but I think there was a coop of some sort there last year and they aren't quite the "go to" club for tactical shoots that they once were - still may be the best of the three, if that sort of stuff floats your boat. Adios, Pizza Bob
-
Another fallen officer
Not that it matters, but the account that I read stated the original perp (man with a knife) was already down and when a Transit Cop from the station across the street ran into the scene with gun drawn, an officer on the scene reacted to the drawn gun and shot him. A sad state of affairs. My condolences to the family. Adios, Pizza Bob
-
Thoughts on few revolvers I plan to shoot...
If by "too small" you mean barrel length, then yes. 3" is really the ideal barrel length for a .357 intended for carry. The 3" barrel length allows for an ejector rod long enough to have the cases fully clear the cylinder. For a range/HD gun you'd want a 4" to 6" barrel. If you are talking the overall size of the gun, then the L-frame Smiths are pretty large - they fall squarely in the middle of the line-up. Larger than J & K frames and smaller than N & X frames. The L-frame came about because it could handle a steady diet of .357's. The K-frame while better for carry (smaller, lighter) was OK for use with .357's occasionally but would shoot loose on a steady diet. HTH Adios, Pizza Bob
-
Thoughts on few revolvers I plan to shoot...
How old are you again? Boy, are you boring How'd you make out with the Robbinsville PD? Adios, Pizza Bob
-
FID & PP Card Township Paperwork Requirements
Curious.....Do you still have a copy of the employer form? Did it simply state that it wanted to confirm employment, or did it state the purpose for the inquiry? Something like: "Joe Blow has applied for a Firearms ID Card and listed you as his employer....". We would really like to get a copy of that form, especially if the latter scenario more accurately depicts it. I've sent you a PM with my e-mail address so that, if you have a copy, you can forward it. Redact any personal info, just interested in the content of the form. Thanks. Adios, Pizza Bob
-
Thoughts on few revolvers I plan to shoot...
As Jon said - yes do exactly that. I'd just take them in - forget trying to call them. Ask the dispatcher / desk personnel whether they fingerprint there or have Morpho Trak do it. Ask if the detective is available, speak to him if he is - be pro-active. Adios, Pizza Bob
-
Thoughts on few revolvers I plan to shoot...
Are you just trying to get the forms? If so, here... http://www.njsp.org/...rms/sts-033.pdf This is the application for the FPID. You can get pistol permits to purchase at the same time, just indicate so in the appropriate place on the form. You can fill this one out on your computer and then print it out. (You may want to save the filled-out form on your hard drive - saves time in the future for additional Permits to Purchase) http://www.njsp.org/...arms/sp-066.pdf This is the Mental Health Records Check. It, too, can be filled out on your computer and printed out (likewise, save this also). Do not sign it. It must be witnessed by a sworn officer, so sign only in their presence. Since this is your first time, you will need to be fingerprinted. Some local police still do their owm, others farm it out to Morpho Trak (Sagem Morpho). Not sure what Robbinsville does. In the future (once your prints are on file) all you'll need will be a form 212A - non-criminal background check. This form is only obtainable at your local police department. This should be all you'll need. Note, I said "should be". A lot of departments illegally add form and/or content to the process. Up to you if you want to "go with the flow" or make waves, but the above is a good place to start. Have no idea why a detective would need to "talk to you", unless it's strictly instructive. Good luck. Adios, Pizza Bob
-
Thoughts on few revolvers I plan to shoot...
Boy, now I really feel old - don't think I've ever heard anybody refer to "the classic, old school look of silver revolvers", unless they were talking about nickel-plated guns. I already had more than a few guns when stainless became popular. My point is that you should consider a nice blued version as an alternative to SS. The equivalent blued model to the S&W model 67 is a model 15, which you may be able to find for less money. Either the 67 or the 15 will be less money than 586 (blued) or 686 (SS). If you have the urge, down the road, to shoot .357's, then buy a .357 at that time - always nice to have an excuse to buy another gun. One other thing that you'll learn is that advice from counter guys at the gun store is usually worth about what you paid for it - of course the same could be said about here, except we don't have a vested interest. Good luck and have fun. My model 15 is shown below. Adios, Pizza Bob
-
Colt LE6940
If I am interpreting the law correctly, that gun is not allowed in NJ. It is a "named" weapon on the list. The only AR15's allowed are the HBAR variations. The LE6940 is an Advanced Law Enforcement Carbine. I think you have to get a clone or, if you want a Colt, get an HBAR. Others will be along to correct me if I'm wrong. Good luck. Adios, Pizza Bob
-
Buying lower in pa
Can't give you the cite, I only know this because I bought a complete lower (with A2 stock) from Chris at Advanced Armament in Pittston, PA. I thought it would be the same as buying a rifle - especially with the stock on it. Chris told me, and my FFL here in NJ confirmed it, that it must be handled like a handgun - shipped to an FFL and transferred. Stripped lowers are why they changed the 4473 and they are now designated as "other" since they can be built into a handgun or rifle. Adios, Pizza Bob
-
Moving....
Not a great area either - at least some sections. Morrisville area more toward Yardley - the closer to Yardley, the better it gets, but, of course, more money (location, location, location). Adios, Pizza Bob
-
Buying lower in pa
It's a federal thing and lowers - whether complete with A2 stock or whatever, as well as stripped lowers follow the rules for handguns. If you buy in PA it must be shipped to a NJ FFL and transferred to you through their books. You can, however, purchase a complete rifle in PA, as long as you have your FPID and you are supposed to fill out a COE - although some PA dealers don't really care about the COE. The PSP thing is/was a different issue that had to do with some unique PA paperwork - NJ isn't the only state with BS paperwork. Adios, Pizza Bob
-
New guy from Robbinsville (Mercer Co)!
The 5-boro tour is a blast - if it's still as big as it was "back in the day". 17K bikes - took an hour and a half to pass any given point. Have fun. Some nice easy single track, along the canal on the PA side of the river. For us softies, the NJ is better groomed and is more like a road than single-track. Adios, Pizza Bob
-
New guy from Robbinsville (Mercer Co)!
Welcome Michael! Could I trouble you to scan and send me a copy of any reference forms, or other added forms, other than the STS-033 (application), 066 (mental health check), 212A (non-criminal background check - although since this is your first time, you'll be fingerprinted rather than use this). I'll send you a PM with my e-mail. There are threads on here about this data collection effort. It's legitimate and may ultimately benefit all of us. Thanks for whatever you can do. Good suggestion to go to the meet-ups at Sure Shot, you will have the opportunity to fondle and shoot lots of different guns. Most dealers here in NJ (esp the two closest to you - Cheyenne Mtn and Sportsman's Center) usually won't let you handle a gun without an FPID - not the law, just their policy. I used to cycle too.....25 years ago, now I'm a fat balding old fart - but I can shoot. Did the 5-boro tour in NYC a couple years. Good luck. Adios, Pizza Bob<---hence the fat
-
Gun Safe
Don't forget that in NJ there is no sales tax on gun safes.......well they gotta give us some perks afterall.
-
Good powders for 9mm loads
231
-
Local retail sources for reloading supplies?
Isn't T&T the guy that does most of the gun shows in the area? I believe that he was at the Philly Armory show and he does others. Good prices and good selection. My buddy left that show about $260 lighter.
-
Rally in Phila... can I legally carry?
Two notes: 1) I believe the new Philly law does not just single out PA residents - it applies to anyone carrying on a license from a state in which they do not reside. As originally proposed, it was only to apply to PA residents - I don't think that was the final version. I may be wrong, but it's a moot point as it violates PA pre-emption. If you are carrying concealed, there would be a slim chance you'd become a test case, and it is doubtful that the DA would prosecute - they know it's illegal, they just do it anyway. Philly feel-good moment. 2) The within 1000' of a school law, unless you have a resident license, has never been tested. It was thrown out once and rewritten, but no one has ever been prosecuted under this law. I believe that as the law is written, they have to prove intent. Not something to worry about either. I won't go into Philly unarmed. Adios, Pizza Bob
-
Fobus holster fit REALLY tight
Fobus holsters are polymers (PET, maybe?), not Kydex
-
Kidnap victim appeals to carry handgun
There are some interesting side notes to this drama. The man appealing is one of the plaintiffs in the SAF/NRA suit against NJ. If he should win his appeal for a CCW permit, will he lose standing in the suit? Not a biggie, because there are other plaintiffs as well. But he would be used as an example by NJ, that they do indeed grant CCW permits. That being said, given the laws as they are now enforced, there is no way that he should prevail in the appeal - if he does, that should send a red flag to the gun community that he is being used politically, as indicated in the first paragraph. I say he shouldn't prevail because the threat, for him, no longer exists. He was a victim of mistaken identity and kidnapped and taken to Missouri, IIRC. Little hard to argue that you are afraid of being mistaken a second time and therefore have justifiable cause (required under existing law) to be issued a permit. His standing, as a plaintiff in the NJ lawsuit, stems from the fact that had he had a weapon prior to the kidnapping (which I believe he had applied for), he could have defended himself. Adios, Pizza Bob