Everything posted by Pizza Bob
-
FID process in Paramus
Only thing I noticed on their website is that they are incorrect in stating that you need to have an FPID before you can apply for P2P. The two are mutually exclusive and use exactly the same application process. Adios, Pizza Bob
-
FID & PP Card Township Paperwork Requirements
Assuming that you mean he has been fingerprinted previously for a FPID or P2P's. Unfortunately, this is really at the discretion of the CLEO. The statutes and the NJSP guide book say that a non-criminal background check can be done (now electronically) in leiu of fingerprints, but they do not restrict the issuing entity from requiring them. I think your friend should ask for clarification from the PD (preferably the CLEO) and inquire why additional prints are needed. If somebody had the time, inclination and money they could press this issue on financial grounds. At more than $50 a pop it adds up quickly if you are an enthusiast, and, since fingerprints don't change, they are literally charging you unnecessarily for exercising a right. Good luck to your friend, but I'd be amazed if he gets them to back-off their position. Adios, Pizza Bob
-
Mercer County Meet-Up: Saturday, April 19th.
The way this winter has been (and is yet to be if you listen to the prognosticators), are you sure that's safe? You know you can count Maggie & me in. Adios, Pizza Bob
-
Anyone going to Ontelaunee tomorrow?
Sorry, Ron's right. They were a big IDPA club. Ron, do you know if they will continue with IDPA? They also hold ICORE matches.
-
Dan Wesson Revolvers coming back?
They had a frame mounted firing pin in the originals, back in the 70's. I would assume no lock. The lock on the S&W's was a result of a deal that Smith (under former management) cut with the Clinton White House to prevent the product safety lawsuits, that ultimately got shut down via legislation - but we're stuck with them. The action is very short and smooth. With all the fuss today about MIM, Dan Wesson was using sintered metal parts from their inception. And, yes, the cylinder release is in front of the cylinder on the crane - there is a locking point there. Harder for you guys that weak-hand load. We strong-handers can just hit it with the weak thumb while pushing out the cylinder. Here's mine... Interesting guns. I had a .375 Super Mag on order (with my 3-digit IHMSA number for a serial number) back in the 80's, but got tired of waiting and bought a Series 70 Gold Cup instead - which led me to IPSC. Adios, Pizza Bob
-
Anyone going to Ontelaunee tomorrow?
IDPA
-
Dawson Novak cut 1911 sights Partridge or Ramped
- Critical defense not considered hollow point?
The problem is that you have the referenced letter stating that you are good to go with those three selections, on the one hand, and on the other, you have the Aitken decision that took the contemporary definition of dum-dum to mean any bullet that expands more than usual - whatever that is. The proverbial rock and a hard place. If you are going to go with one of the named rounds, I'd go with the Federal EFMJ because upon visual inspection they appear like any other FMJ and no one's the wiser. Adios, Pizza Bob- Any Black Powder Cartidge Rifle Shooters in the Area?
Isn't there a big long distance BPCR match coming up at Cumberland Rifleman? Out to 600 yards.- lever action suggestions
Pistol caliber lever is a good thought. If she is averse to a .22LR lever, check out a Henry in .17 HMR. May be a better alternative since .22 LR is still tough to find - more punch too.- Being denied for a carry permit will NOT affect your PtP or FID application
To be fair, I'd hardly say this is precedent setting. You have the results from one of over 500 issuing municipalities. We all know the vagaries of just trying to apply for P2P's or FPID's from one PD to another - so while this is great for Mr. Almeida, I'd hardly say that this is proof positive that others will have the same luck. Yes, I'm sure that if you appeal a denial, that it will eventually get overturned, but who needs the hassle? And how about applying for non-resident permits - all of those applications (at least the ones I've seen) have the same dreaded question. Adios, Pizza Bob- FID change of address issue in Jersey City
When you consider that the process for obtaining both an FPID or a P2P is identical, it stands to reason that a copy of the P2P should be good to go. The original purpose for the P2P may have expired, but it still shows that you have been vetted, the same as a FPID - the original intended purpose of which was not to buy ammo. Adios, Pizza Bob The problem may arise if you have an unenlightened FFL- Walther PPQ
I tried "Walther PPQ" also- FID change of address issue in Jersey City
I am not 100% certain, but I believe that you can purchase handgun ammo using the pink copy of a P2P that has been used. I believe that Paul was under that impression also, but I don't want to put words in his mouth - he'll chime in if he is still following this thread. I'm curious if the OP has pursued his issue any further. Adios, Pizza Bob- Walther PPQ
I don't know why this doesn't come up with a "PPQ" search, but here is the be all and end all of PPQ threads, by The Wombat... http://njgunforums.com/forum/index.php?/topic/29106-walther-ppq/ Enjoy. Adios, Pizza Bob- FID change of address issue in Jersey City
As Paul has already pointed out, they are two separate things. One can apply for and obtain a P2P without having a FPID.- Which used blued 357
If you are looking for a shooter, there is only one obvious choice - that is the S&W 586. The Colts have entered the realm of collectible and you will be hard pressed to find anyone to work on it, should you need to - not to mention parts scarcity. Dan Wessons have their followers and they are very accurate handguns - I have one. Would I shoot it to the extent I do my Smiths? No way - again same reasons as the Colt, without the collectibility factor - although these hold their value pretty well. And before anyone jumps in here to point out that DW is once again making revolvers - who knows if there will be any parts interchangability or if DW/CZ will be willing to work On the Monson, MA guns. Too soon to tell. Get the Smith. I think that you will see the 586's get a slight premium in price over their 686 counterparts. Adios, Pizza Bob- They don't know what CCW is in Trenton - unbelievable
Now I understand how it could take Mainor 20 seconds to change it - that's complicated.- Do I need crimp die for .45 ACP
@shocker - your experience is certainly more recent than mine. The only rimless case I reloaded for was the .45 ACP with lead bullets (H&G 68). The die set was a Lyman set with carbide sizing die. The seater/crimp die was of the roll crimp variety. As was pointed out - especially with the .45 ACP - a good number of revolvers were chambered for that round also. Guilty on the lunatic assessment. @JackDaWack - There are many revolvers chambered for semi-auto (rimless & semi-rimmed) rounds. These make use of moon clips, half-moon clips or double clips for accurate headspacing, since there is no rim. There is a shoulder in the chamber, for the case mouth, but since a revolver does not have an extractor, case length would have to be exact to be 100% reliable. Point of fact. most semi-auto factory ammo and brass is considerably shorter than max SAAMI spec, which is the length to which the chambers would have to be bored. Adios, Pizza Bob- Looking For Sellier and Bellot Police 9mm
Just out of curiosity, what's the difference, other than the sealed primers that are visible? Why the need for the "Police" ammo - extended storage?- Do I need crimp die for .45 ACP
I'll just preface this with: It has been a long time since I've done any reloading. There are two types of crimp dies. There is a roll crimp die, which is usually incorporated into the seating die. Simply a shoulder machined into the die body that "rolls" the case mouth into the bullet cannelure or crimp groove. A roll crimp is most often used on revolver calibers that headspace on the rim of the case. Most die sets contain a roll crimp/seating die, regardless of caliber. For semi-auto, rimless or semi-rimless cartridges that headspace on the case mouth (theoretically), a taper crimp die should be used. The opening in a taper crimp die does exactly that, it tapers - reduces in diameter the deeper into the die the round is forced. This swedges the case against the body of the bullet, which leaves a clean edge case mouth to headspace on the shoulder in the chamber. Those of you that have been using the (roll crimp) die that came with your die set, for loading rimless cartridges, have probably not run into any problems because, most semi-auto cartridges actually headspace on the extractor, which holds the cartridge against the breech and allows for a firing pin strike strong enough to ignite the primer, rather than the actual case mouth. You can over-crimp with either type of die, which will result in case bulging and a possible failure to chamber. HTH Adios, Pizza Bob- Out of State Long Gun Purchase
- First time IDPA shoot
Just to make people aware - the Wednesday night practice is for SCFGPA members only. Sunday's match is open to the public at large, but if you haven't registered already you will probably end up on the wait list. Have fun tonight. See you Sunday. Adios, Pizza Bob- Cancelled**HUGE IDPA Match 3/23 EFGA**Cancelled
Glad you put the qualifier "like you" in there, otherwise you would be maligning all wheelgunners. As it is, you could be correct.- Cancelled**HUGE IDPA Match 3/23 EFGA**Cancelled
Hey, we can always point the cars down range and shoot with the headlights. The more the merrier, I say. Oh, and Ken: SURPRISE!!! - Critical defense not considered hollow point?