Everything posted by Pizza Bob
-
Weird Remington .45 ammo
A .38 Super maybe?
-
Weird Remington .45 ammo
Make sure that you include the lot number. Should be stamped on the box somewhere. Most likely an interior flap.
-
CHRI Form 212A Online Submission Question
Not sure what you are waiting for. I would not expect the results to come back to you - just as they didn't with a hardcopy submission.
-
627-4 PC Before and After
Thanks, Mike, I appreciate the offer, but I haven't reloaded since 1991. Moved into a new house and never set-up my reloading equipment - someday I'll start up again, although my presses will be antiques. See you at Shongum - bring a wheelie. Adios, Pizza Bob
-
627-4 PC Before and After
Mike, You've been shooting bottom-feeders too long. LOL. Being a semi-rimmed cartridge (essentially rimless), you need moon clips so that you can positively headspace the cartridges and eject the empties. I think you must be looking for the rebate that leaves a rim around the outside circumference of the cylinder. This would only be present if the gun was chambered for a rimmed cartridge and you wanted the capability of shooting it with or without moon clips. Since this is chambered for .38 Super the back of the cylinder is flush - just as it is on a 625 chambered in .45 ACP. Adios, Pizza Bob
-
Ear protection
I use these and love them... http://www.amazon.com/SensGard-SG-31-Hearing-Protection-Device/dp/B001IMHSP4/ref=sr_1_1?ie=UTF8&qid=1388944191&sr=8-1&keywords=zem+hearing+protection Make sure you get the 31 NRR rated ones - they make a cheaper 26 NRR pair also. These are somewhat an acquired taste as gunshots still seem very loud while using them. What you don't get is any percussive effect. But you can still easily hear normal conversations. Low-profile - work great with long guns and very comfortable for all day wear. If you go to the Zem/Sensgard website they explain the scientific basis for their efficacy. Great alternative to muffs or plugs. Adios, Pizza Bob
-
627-4 PC Before and After
I've got no interest in a 5 shot .44 Magnum. Can't think of a use for such a gun. For SD, a 696 would be a better choice. If you're hunting, you really aren't constrained by size or weight, so you are better off with a 6 shot, larger gun. So what possible purpose does a 5 shot, medium frame, .44 Magnum have? Adios, Pizza Bob @tony357 - Thanks
-
627-4 PC Before and After
Exactly. Thanks
-
Looking for a new IWB holster for the Glock 27
All this kydex. I think kydex is great for OWB competition holsters, but for IWB, call me old school, nothing is more comfortable than leather - all leather. And the finest design is Milt Sparks Versa Max II (I have four of them). JMHO, but what do I know, I'm old. Adios, Pizza Bob
-
627-4 PC Before and After
Weigand simply replaces the blade. If not done properly the blade will be loose. Since it is a blade replacement only, you are still using the adjustability mechanism of the OE sight, which, IMHO, is not the greatest. The blade is aluminum - not steel, so somewhat vulnerable. All that being said, I intend to keep my Weigand blade on my 625-8. The LPA sight is all steel. The adjustments are more positive than the OE sights. The quality is there - fits the gun precisely. I like it so much I just ordered two more for my IDPA guns (646 & 586). HTH Adios, Bob
-
AAHHHHHHHHhhhhhhhhh!!! I didn't want to buy anymore guns...
It's taken you this long?
-
627-4 PC Before and After
You're right. I am so conditioned to think in groups of 6 shots that I'll probably reload after 6 and dump 2 live rounds on the ground. At least I don't have to take off my shoes to count that high.
-
627-4 PC Before and After
We all like to personalize our guns with the goal usually being aesthetics or function or both. I recently acquired a S&W 627-4 PC that is chambered in .38 Super. I intend to use this under the new USPSA revolver rules that allow 8-shot revolvers (to be scored Minor). I posted some pictures on the forum of the gun in the "as received" condition, I'll repeat that here... Here are the after pics... The differences are: Hogue Big Butt rubber/wood, finger-groove grips California Competition Works extended cylinder release Comp changed out for muzzle cap Dawson .100" front fiber optic sight LPA rear target sight I like the rear sight so much that I am changing to it on two of my other revolvers that I use in IDPA. Don't forget Shongum on 2/1 and the revolver extravaganza. See you there. Adios, Pizza Bob
-
dinged up ammo...
Probably some safarkus on the primer seater
-
Heads-Up CCW
Doug: I'm aware of it and have seen it on the net, but never in person. Kind of expensive and I'd need separate ones for each caliber (.38 Super, .45 ACP and .40 S&W) whereas with the moonclip tool all I need to do is change arbors ($5 each). I load all the moonclips I need for a match at home while watching TV - likewise demooning. Seldom do I have to fool with that at a match, unless it's a really high round count. Adios, Pizza Bob
-
Heads-Up CCW
No, this doesn't have anything to do with concealed carry. The CCW in this instance is: California Competition Works. Their website is: http://www.demooner.com I wanted to order a small part from them and attempted to do so. During the checkout process I noticed that it assessed California sales tax. I e-mailed them and inquired as to why this was and they responded that it was a "glitch" on the website. This morning I decided to try again. Proceeding through the checkout process I found that the tax issue had been resolved. I came to the page for entry of payment information and I glanced up at the URL to make sure it was a secure site (https) and found that it was not. I deleted all previously entered information and closed the site out. I ordered the item from another source. This is just a warning about that site specifically and about entering payment information securely, when purchasing on the Internet, in general. Consider it as part of your general "Situational Awareness." Adios, Pizza Bob
-
multiple pistols
I have no doubt that is what you were told, but that doesn't make it the law. An exemption is an exemption and that's it. The law exempts multiple handgun purchases from the rules of OGAM - not part of them, not from particular constraints - it is a total exemption. Adios, Pizza Bob
-
.500 S&W
Because the gun chambered in .460 is more versatile in that it also shoots .454 Casull and .45 Colt. Also the ballistics are better for the .460.
-
.500 S&W
That was how we came across the .475 Linebaugh - my friend was looking for a .303 - which this guy had and my buddy bought, but the .475 kind of got my attention.
-
.500 S&W
My buddy has a Ruger #1 in 460 S&W. And if you're interested, I know where ther is a new one in .475 Linebaugh - just PM me. Adios, Pizza Bob
-
AAHHHHHHHHhhhhhhhhh!!! I didn't want to buy anymore guns...
Any revolver chambered for a rimless (or semi-rimmed) cartridge will use moonclips. If case length is correct they could be fired without, but then extraction becomes problematic. There are a few exceptions like the S&W model 547 and Charter Arms Pitbull series, but the beauty of moonclips is the rapid reload potential and the ease of recovering your brass. Adios, Pizza Bob
-
16" overall barrel
Nick - if the brake is welded to the barrel it becomes part of the barrel. The length of the barrel would be from the breechface to the end of whatever is welded to the barrel.
-
Affordable inch/lb torque wrench?
Both Wheeler Engineering (Midway's house brand) and Weaver (the scope people)make torque drivers for around $40 - $50 bucks.
-
multiple pistols
I have to disagree, based on my interpretation of the relevant statute below - but Lord knows, I'm no lawyer. The relevant statute is 2C:58-3,i,(6) Purchase of Firearms Part i - Restriction on number of firearms person may purchase. Only one handgun shall be purchased or delivered on each permit and no more than one handgun shall be purchased within any 30-day period, but this limitation shall not apply to: Subsection (6) - any transaction where the superintendent issues an exemption from the prohibition in this subsection pursuant to the provisions of section 4 of P.L.2009, c.186 (C.2C:58-3.4). Subsection (6), which refers to part i, indicates that any purchase done under the Superintendent's exemption, falls outside of the OGAM framework. OGAM does not apply - it doesn't matter where the multiple purchase occurs in the buying cycle, it has no effect on purchases undertaken within the OGAM restriction. Let's say that you purchase a single firearm on March 1st. The 30 day clock starts on March 2nd and your next eligible OGAM purchase could not be made until April 1st. However, under the above statute, you could file for a multiple purchase exemption and execute that any time within that 30 day window (i.e. March 15th), without it affecting the purchases pursuant to OGAM. Multiple purchases are wholly outside of the OGAM restriction. JMHO Adios, Pizza Bob
-
Savage 93r17 tr
The .17 rimfires are some of the most fun you can have with your clothes on.....or off.