Everything posted by Pizza Bob
-
Anyone watch "The Blacklist"?
The PD didn't take out the bad guy, his wife picked up the revolver dropped by the CCW guy and shot him in the back.
-
Question regarding transfer/sale of pre-ban rifles
There is no such thing as a "pre-ban" rifle in NJ. If it does meet the NJ "Assault Rifle" criteria it's a prohibited weapon.
-
see through rings vs rail
I have said it before and I'll say it again to you - a compromise is something that does no one thing well and two things with mediocrity. See-through rings position the scope too high for good cheek weld. Can't say that I am familiar with a see-through rail, but would imagine the same applies. Anything that raises the optic enough for you to see under it, is a bad idea. You can get normal height rings with throw-levers so that you can easily remove and reinstall a scope, but I think the better alternative, considering the effective range that your 10-22 will be used for, would be either a non-magnifying red dot, or a low power variable scope. JMHO. Adios, Pizza Bob
-
Anyone else shooting the Arctic Blast IDPA match this weekend?
I just want to know if they are revolver friendly.
-
NEW STI Dealer in NJ !!!
It goes: Manufacturer > Distributor > Dealer Although with STI's set-up, the general public can buy from one of their Distributors (through a local FFL). Their distributors in the US are Dawson and Brazzos. They state on their website that any FFL can order direct from them. The dealers they list are stocking dealers. And World Class Steel in Edison is listed as an STI dealer.
-
Anyone else shooting the Arctic Blast IDPA match this weekend?
Looks like you are the only crazy one among us. Think of us on Sunday, when you are out freezing your nads off. We'll be warm & toasty and eating pizza, while also enjoying IDPA at Somerset. (still two slots still open, BTW). Have fun Stu. Adios, Pizza Bob
-
Post PICs of your SPR style rifles
I decided that girth was better than length
-
Post PICs of your SPR style rifles
Does this qualify? Admittedly, I cheaped-out on the optics, but for all the use it gets, it works fine. Lower Receiver Rock River Arms LAR15 Magpul PRS Gen. II stock Accu-shot mid-range monopod RRA 2-stage match trigger Standard trigger guard Hogue pistol grip Upper Receiver Rock River Arms Varmint Gas DI operating system Bravo Company Gunfighter charge handle - Large 16” Wilson stainless bull barrel (.920” @ muzzle), 1:8 twist Free-float short aluminum checkered forearm w/sling swivel stud Harris bi-pod w/swivel 9” – 13” Konus M30 4.5-16x40SF. Illum (red/blue) mildot reticle Burris 30mm medium Zee rings LaRue throw-lever 5/8” riser Troy Industries folding rear BUIS Midwest Industries gas-block mounted folding front BUIS Adios, Pizza Bob
-
5.56 question
IIRC, SS109 refers to the bullet only - the 62 gr green tip with steel penetrator. M855 designates the entire cartridge - which is loaded with SS109 bullets.
-
Revolver Extravaganza
Not that I know of.
-
5.56 question
I believe that Clinton stopped the sale of true military surplus, but if for some reason the rounds are not up to spec (and these are often cosmetic reasons), they designate that with an "X" in front of the military nomenclature for that round. Essentially, XM855 or XM193 are seconds that are allowed to be sold off. That's my story and I'm sticking to it. Actually, that is what I have heard - can't vouch for the info so someone more knowledgeable may have to give you the straight story. Green tip ammo (855) does have a steel penetrator, but it is not classified as "armor piercing", but as OG said, some ranges, with metal backstops, may not allow its use. Adios, Pizza Bob
-
Listing An Out of State Employer On Your Pistol Permit App
Yes I do. The law stipulates two references and there are appropriate fields to support that on the STS-033. Using the employment information as a defacto reference goes beyond the scope of the statute. The NJSP secret book says that they are to verify employment as part of their background investigation, not seek any other info about the applicant or disclose why they are asking. JMHO / IANAL Adios, Pizza Bob
-
any match's held at RTSP
OP: I see that you listed your home range as Easton. You just missed an IDPA match at Phillipsburg, yesterday (yes we did shoot, but only indoors instead of the 50/50 in & out). Easton suspends IDPA matches for the winter, but I believe that they start up again in March. This coming Sunday 1/19, there is an indoor IDPA match at SCFGPA (Somerset). There is a cap on the number of participants, but there are still a few slots left. Here is where you register... http://www.somersetidpa.com/matches/ If you are new to competitive shooting you may want to read the stickies at the top of the competition section. Somerset is a good match for people new to IDPA and competitive shooting in general. There is a USPSA match at Shongum on 2/1 - that will be weather dependent. Adios, Pizza Bob
-
My first handgun! S&W 686+ content
That wasn't a firearm malfunction, it was an ammunition malfunction. Any other pressure signs? Primer flow/flattening? Sticky extraction? Were you shooting factory ammo, commercially reloaded stuff or handloads you or a friend concocted? Adios, Pizza Bob
-
Who are you following for your SHOT Show info?
It was a consecutive post duplication of effort. Sgt Toadette already suggested TFB. Nice of you to provide the link, but your motive would have been clearer with a "Me too!" followed by the link. I just found it humorous - no offense intended.
-
Judge Rules NJ Towns Can NOT Arbitrarily Add Additional Requirements for Gun Permits
This has been the law - I fail to see why he had to take them to court to uphold it. Isn't that the county prosecutor's job? 2C:30-2 Official Misconduct If a government entity knowingly violates the law they can be investigated/prosecuted under the Official Misconduct statute. Thank you Jeremy, but it seems that this maybe should have been handled by the County Prosecutor or the State AG. It's a shame that you had to spend the money to get them to uphold an existing law. If I were you, I'd be looking to the state or county for reimbursement of your legal expenses. Adios, Pizza Bob <---IANAL
-
Who are you following for your SHOT Show info?
Yes, that is usually a good source. Multiple attendees usually report there.
-
Who are you following for your SHOT Show info?
Doh!
-
Listing An Out of State Employer On Your Pistol Permit App
What new law? Are you referring to the court finding about additional documents or conditions? That really doesn't address the issue you raise. Only in NJ do you have to take the police to court to get them to obey the law.
-
Revolver Extravaganza
Probably not a bad time to bump this to the top, as a reminder. Come one, come all.
-
Listing An Out of State Employer On Your Pistol Permit App
Totally irrelevant to what is being discussed. There is a field on the STS-033 for employment information. This is meant to be used to confirm employment - nothing else.
-
Listing An Out of State Employer On Your Pistol Permit App
But it could be construed to be false information, as it does apply and the information is available. With your right to bear arms at stake, it's not the time to split semantic hairs.
-
My first handgun! S&W 686+ content
You don't even have to remove the "flag". For those that are into aesthetics, removing the flag leaves a space next to the hammer. All that has to be done is to remove the flag, file off the "D" shaped lug and then replace the flag. All external appearances remain the same. It is the lug on the flag that engages a recess in the hammer that locks the gun. Most instances of failure occur in light, high-recoiling guns. I have no doubt that some 686's may have experienced it too, but that is more a matter of numbers - there are so many of them that the pool of potential malfunctions makes it more likely to happen. If expressed as a failure rate per 1000 guns, I would expect it to be very low. Adios, Pizza Bob
-
Listing An Out of State Employer On Your Pistol Permit App
Not a good idea... 2C:39-10 c.Any person who gives or causes to be given any false information, or signs a fictitious name or address, in applying for a firearms purchaser identification card, a permit to purchase a handgun, a permit to carry a handgun, a permit to possess a machine gun, a permit to possess an assault firearm, or in completing the certificate or any other instrument required by law in purchasing or otherwise acquiring delivery of any rifle, shotgun, handgun, machine gun, or assault firearm or any other firearm, is guilty of a crime of the third degree. Just sayin' Adios, Pizza Bob
-
Revolver Roll Call
I think that they used that designation for a number of years on the 625's - not just for those made/released in 1989. Just as the "Model of 1955" was used on all Model 25's regardless of year of manufacture. The one pictured would have to be a Model 625-8, at a minimum, as that was the engineering change that included the IL. That engineering change occurred in 2001. Model nomenclature for the 625 series is all over the board and even has the experts (Supica & Nahas) confused. The 625 was introduced as a 625-2 - there were no 625's or 625-1's. Even though the early ones were rollmarked "Model of 1988" they were released in March of 1989. At some point, even though they remained 625-2's, the barrel marking changed to "Model of 1989" and it was laser etched, as opposed to the actual rollmark of the "Model of 1988" guns. The model 25 & 625 are among the most confusing for the reasons given above, plus the model designation was used for both .45 ACP and .45 Colt. Adios, Pizza Bob