Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. If you are willing to ship, Ayoob speaks highly of this revolversmith... http://www.sandburrgunranch.com/ If this is a HD/SD gun, make sure you specify that to the smith. You can get competition guns with a DA pull as low as 4.5 pounds - but I wouldn't want to bet my life on one. Adios, Pizza Bob
  2. Whichever YOU like better. BTW: The slabsided 686+ is not a PC gun - it is part of the Pro series.
  3. The gun the OP is considering is a 586-3. The D&T and new style rear sight came on the 586-4. Unfortunately, $600 to $700 seems to be the norm for a used 586/686. If you can find them for less, you are doing good. Private sale is probably the best venue for finding one at a good price, but know your seller. Adios, Pizza Bob
  4. Kirk: As I pointed out to you on PAFOA, you are one character short in the serial number. This coupled with the hot deal would send up a red flag to me. It should be a 586-3, given the serial number pre-fix. Another red flag comes to mind - at that price he could sell as many of them as he could lay his hands on - no questions asked. Why would he negotiate a price with you? Just proceed with caution. I hope all is as presented, but be careful - especially if you found this on Armslist. Good luck. Adios, Pizza Bob
  5. Not to be a cynic, but that's too good a price. Unless you know the seller personally, I'm thinking this could be a scam. Proceed with caution. If this isn't bogus, the d&t does lessen its value, but even at that it's too cheap. Make sure the holes they d&t didn't go through the barrel. Good luck - heck of a deal if it's a straight piece and the deal is on the up-and-up. Adios, Pizza Bob
  6. My Wilson's (two different vintages) work fine in my STI. Wilson stipulates a break-in procedure, which is pretty much what you outlined in one of your follow-up posts - load them and let them sit. A week may be excessive, a day or two should do it. Also, wasn't your mag funnel interfering somewhat? Maybe remove that until you get them to seat reliably and then re-install. Adios, Pizza Bob
  7. Not a bad habit at all. When the whole Weaver vs Isosceles controversy was going on, the isometric tension you describe was haled as one of the strong points of the Weaver stance.
  8. The safety is a given. Ignorance of NY's SAFE law could also put a major hurt on him.
  9. Sorry, didn't mean to put words in your mouth.
  10. If your brother is a NJ resident, I think he also ought to be concerned taking AR's into NY - LEO friends or not.
  11. I think the jury is still out on that. Alec expounded on this yesterday, and I tend to agree with his assessment. I think for local, club level matches, it will be a toss-up. For major, sanctioned matches (sectionals, nationals, etc.) the 8-shot minors will dominate. Adios, Pizza Bob
  12. No news is good news. But I'll check in the morning before I leave.
  13. If you registered for the match, Ron will send you an e-mail on Friday night if it's cancelled. If it is, it will most likely be because of range conditions - not weather. He'll be checking today. Adios, Pizza Bob
  14. It appears that this is your initial application for an FPID card. That being the case, you needed the two forms you handed in (STS-033 - the Application, and the SP-066 - Mental Health Check) as well as Fingerprinting - which is where your PD dropped the ball. You should have been directed to a Sagem Morpho (aka Morphotrack) facility to be fingerprinted (appx $50 - $55). When that is done and your PD is notified, they will submit your paperwork to the NJSP. Sounds like you have never been fingerprinted. The non-criminal background check (SP-212A) is only used on subsequent applications for P2P's or address changes or duplicate cards, in leiu of fingerprints (this is at the CLEO's discretion - they can require you to get fingerprinted each time or at set intervals). That was done on a hardcopy form only available from your PD and was submitted with an $18 MO for the NJSP. That is in the process of changing. Your PD will give you a URL and their PD identifier number and you make application for the Non-criminal background check on line at the supplied URL. You use a credit card for payment - now $20 (that's $18 plus a $2 "convenience fee"). In your situation, you may just want to withdraw the application and start the process all over again at your new address. Even if you would be issued a FPID tomorrow, you would still have to go through the whole process all over again at your new address. Bet you wish you'd stayed in Indiana now. BTW - welcome to the forum Adios, Pizza Bob
  15. That is the day that the new USPSA ruling that allows 8-shot revolvers to compete in the revolver division (albeit scored minor) goes into effect. To celebrate that fact I posted this thread... http://njgunforums.com/forum/index.php/topic/64065-revolver-extravaganza/ Whether that match will actually happen is still up in the air. While the weather looks like it is going to be favorable, I have no idea what the range conditions will be. That is a call that the match director will make on Friday. He will e-mail all those registered if it is cancelled. In order to register for this match (and it is a regular match - not just wheelguns), you can follow the link in this thread... http://njgunforums.com/forum/index.php/topic/65686-shongum-2114-uspsa-registration-open/ Being the eternal optimist, I have been preparing for this match as if it is a fait accompli. This will be my first match with my new (to me) 627-4 in .38 Super, shown here... Come on folks - we finally get a break in the cold weather, make the most of it - register and come on out. See you there. Adios, Pizza Bob
  16. I used to shoot more than guns. I was christened thus by a 14.1 (straight pool) nemesis. Haven't picked-up a cue in a couple years, since my regular weekly game moved to Manhattan.
  17. So I guess it's my turn to chime in and say: Take the flag out. File off the little "D" shaped lug. Reinstall the flag. Externally no one can tell the IL is non-functional. There is no gap beside the hammer for safarcus and toe-jam to get into and gum-up the works, and you never have to worry about a malfunction again. Adios, Pizza Bob
  18. If she is driving she is covered by the 86 FOPA, providing she travels in accordance with its provisions. If she is flying, it's advisable to fly from an airport in PA - not NJ, not NY - and read the TSA regs about flying with firearms. She may want to apply for a FL CCW also - but she can do that while she is there, it's much quicker that way. If she gets it at the FL address she could use it in PA. Adios, Pizza Bob
  19. I'll be keeping Alec company in the 8-round revolver division - not that I really expect this match to happen, but I'm registered. Adios, Pizza Bob
  20. Here you go Howard, maybe this will help... http://www.gunfacts.info/
  21. Micro-stamping has already proven to be useless. Too easy to alter or replace the part doing the stamping. But anti's don't let logic or proof stand in the way of their agenda. This is a defacto gun ban. I'm with raz-0 on this - if enough manufacturers stop selling guns in CA it gives the pro-gun faction a platform from which to launch a fight on the judicial side - the legislative side is already lost. Adios, Pizza Bob
  22. TFO sights are made by TruGlo, not HiViz. Moot point since they don't make any revolver sights. In my opinion, fiber optic sights are terrific for competition - not so much for home defense. They rely on ambient light conditions to be effective. Tritium sights do offer some assistance in night shooting (HD), but you still have to be able to see the rear sight and the target. If you decide to go the tritium route, use a tritium front blade of standard size, as opposed to Big Dots. Big Dot sights are usually sold as a set (frt & rear) with the rear sight being a shallow V blade. Quick pick-up, maybe, but makes the gun useless for anything much beyond point & shoot range. Dawson makes tritium sight front blades in several widths. If your stock sights work for you visually, then use a standard width front blade (.125"). If you want faster pick-up with less precision, select a narrower front sight blade, like .100". A nice large flat rear target sight gives a great sight picture, but it's hard to beat the stock S&W sight for a HD revolver. I use two different rear sight set-ups on my competition guns, but for HD I think the stock sight is a great set-up. Only thing that may be better is a Bowen rough country rear sight Back to the front sight - S&W uses three types of front sights. 1) DX or Classic - these are user changeable and have a dovetail base that fits into the sight base and are held in place by spring tension. 2) Pinned in - the blade is inserted in a slot milled into the sight base and a solid through-pin is inserted. 3) Integral - rib, sight base and blade are monolithic. These cannot be changed without considerable milling and installation of a new sight base that accepts removable blades (DX type). Yours, being a 686, are most likely pinned in. Changing these is a little more complicated than it appears. The new blades will come not drilled, so after you drive out the original pin (tight interference fit), you have to hold the new sight blade in place while drilling through the existing holes in the sight base - alignment is everything because you are going in one hole, through the new blade, and then it is imperative that you hit the existing hole on the other side of the sight blade. A fixture and a drill press are what's needed. Truth be told, you may already have the best sight set-up for your intended purpose. Save your money and practice using a flashlight. IDPA often times has low-light or no light stages where a flashlight must be used. I'd get a little more familiar with your revolver in practical scenarios so that you can learn what works best for you. JMHO Adios, Pizza Bob
  23. RE: S&W and Ruger - this only applies to their semi-automatic handguns. Since revolvers do not eject the brass, microstamping is useless for them. Ruger and S&W will continue to sell revolvers there, from what I understand.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.