Everything posted by Pizza Bob
-
Combo Semi Auto and Pump Shotgun all in one
The confusion over whether it is one or two evil features is because there is an error in the Administrative Code, which is what is cited above. If you look at the statute, it is any one evil feature. Adios, Pizza Bob
-
My New Toy!!! S&W 625 JM
Chris: Happiness is a warm 625 - of any stripe. Enjoy it. The ammo in the picture - I assume they are your reloads and it appears that you are using Hornady swaged lead. Keep the velocities low as these are pure lead and very soft and will lead the barrel. So when can we expect you at an IDPA / USPSA / action or static steel match? Adios, Pizza Bob
-
I Seem to Have Developed a Penchant for 4" N-Frames
Isn't the 627PC machined for moonclips? If not I would recommend that you have it done (TK Custom). Not all that expensive and faster than speedloaders. The only 8-shot speedloader that I know of is the one made by 5-Star. HKS design, except the release knob twists in the opposite direction (I think that's how they beat patent infringement). The insert & twist loaders are not as fast as the one-motion Safariland loaders, but you have little choice. If you go the moonclip route, you need to buy the high-end moonclips made by Hearthco - the cheap ones do not work well with 8 long rounds. Adios, Pizza Bob
-
I Seem to Have Developed a Penchant for 4" N-Frames
Three of the last four handguns I've acquired have been 4" N-Frame Smith & Wessons... Top Left - Model 624 / .44 S&W Special / Rogers Combat Grips Top Right - Model 625-8PC / .45 ACP or Auto Rim / Weigand rear & Hi-Vis front sights / Apex hammer / VZ Grips Bottom Center - Model 25-13 / .45 Colt or .45 ACP (TK Custom) / Burris Fast Fire III on Allchin mount / Hogue Big Butt grips Just liking the shorter barrels. The last six revolvers I've purchased (including these three) have all been nominally 4". Enjoy. Adios, Pizza Bob
-
How to document an exchange of a handgun?
If you are returning the gun to the dealer from whom you purchased it, the replacement will be shipped to them and the dealer notifies the NJSP as the new gun will be sold under the same permit to purchase as the defective one - all this assumes it was returned within the 30 days. Adios, Pizza Bob
-
1911 holster
Glad it worked out for you.
-
Savage 111 or 11VT package rifles?
Keep in mind that both Nikon and Bushnell make several lines of scopes - from very low-end to very high-end. Package rifles usually come with low-end scopes. IMHO, better to buy the rifle and mount your own scope. Adios, Pizza Bob
-
Bloomberg investigation finds weapons sold online in violation of Federal law
The methodology of that study is so full of fail that it's laughable - not to mention the false premise it's based on.
-
Starbucks is caving
All except Philadelphia, or in a vehicle.
-
Hollow Point Ammo
Yes they can. GRIZ, wanna help me out here? Something in LEOSA or the state regs was changed to specifically allow retired LEO's to carry HP's.
-
My Experience - LAX Ammo
How can you do that legally?
- Any Steyr M9-A1 owners here?
-
My Experience - LAX Ammo
Requires a state photo ID (see OP for exact verbiage as it was cut & paste from their site). I was going to send them my Florida CCW permit, but their heads might have exploded.
-
Starbucks is caving
- Hollow Point Ammo
LEO's most certainly can, as can retired LEO's.- My Experience - LAX Ammo
I have to say that I am somewhat amazed at the replies to this thread. Maybe it is a generational thing, or a distrust of giving up information that goes into a vulnerable database. I guess for the generation that lays their entire lives open on Face Book, giving up your DL is no big deal - at least until you become a victim of identity theft. I have no problem giving them my FPID, as that is what the law requires. But what do they need the DL for? NJ does not require it. LAX does not require it of residents ordering from other states (with the exception of IL - which is another story I'm sure), so why single out NJ residents. Don't you put up with enough? If I lived 1000 yards west of my current location and placed the same order, all that would have been required of me would have been a credit card. I also would have had less of a problem with this requirement if it was policy for all orders, regardless of state of residency. I don't Face Book or Twitter or whatever other social media du jour there is - this forum is about as social as I get. I just can't see any rationale for them to require your DL, when they don't require it of everyone. Someone give me a reason. Adios, Pizza Bob<----tilting at yet another windmill?????- My Experience - LAX Ammo
Like a lot of you, I buy my ammunition in bulk via the Internet. Also, like many of you I use Gunbot as the mechanism that directs me to the best prices and stock status of the various ammo vendors. I kept seeing LAX Ammo show-up as both a source for new, name brand ammunition as well as commercially reloaded ammunition. I am always a little wary of new enterprises, but they had what I needed at a good price, so I thought that I would give them a try. Ordered 1K rounds of Federal .40 S&W. In their "Terms of Service", for NJ residents they state the following... Firearms Purchase ID or Federal Firearms License, AND state photo ID submitted by fax (310-568-0611) or email to [email protected] I e-mailed them a copy of my FPID with my SS# redacted (I understand the new ones no longer have your SS# on them - mine does). I also e-mailed them a copy of my NJ DL with the DL# redacted. The requirement for a state picture ID made no sense to me, and since NJ law - with which they were apparently trying to comply - does not require a secondary identifier, I didn't think the DL with the redacted number would be a problem. All it really does is show that the CC address, the ship to address and the FPID address are all consistent. It's my understanding that the police would never release info to a third party presenting a suspect DL - to another LE agency yes, but not to a corporate entity. I got a return e-mail saying they would not accept the redacted DL (the FPID was OK) and directed me to submit my DL intact. I voiced my discomfort over supplying them with a document that increased the potential of identity theft. I also questioned the need for a secondary form of ID in light of the fact that NJ law requires the exhibiting of the FPID, only, for handgun ammunition purchases. I also pointed out that they did not require any form of ID from anyone placing an order from a "free" state. I cited the relevant NJ statute and pointed out the fact that the FPID had a unique identifying number. I also pointed out the discriminatory nature of their requirement - either require ID for all orders or drop the requirement for NJ and comply with the law as written. I may as well have been talking to the wall. They kept insisting and I kept asking what their rationale was for the requirement - for which they could only state "For verification." Verification of what? That I live in NJ? That I have a DL? I guess I'll never know. I finally, under protest, relented. If I had canceled the order there would have been a cancellation fee assessed and the price of the ammo was a good one. I informed them that it was the first & last order I'd be placing with them until they amended there policies for NJ purchasers. I also said that I would attempt to inform other NJ shooters of their unreasonable requirement - so here we are. The next step is to see in how timely a manner they ship. In the meantime I'd recommend against purchasing ammo from this company until they treat us as they do the rest of the nation and drop the secondary ID requirement. Adios, Pizza Bob- How to document an exchange of a handgun?
2C:58-3 i.Restriction on number of firearms person may purchase. Only one handgun shall be purchased or delivered on each permit and no more than one handgun shall be purchased within any 30-day period, but this limitation shall not apply to: (5)any transaction where the person has purchased a handgun from a licensed retail dealer and has returned that handgun to the dealer in exchange for another handgun within 30 days of the original transaction, provided the retail dealer reports the exchange transaction to the superintendent If you are beyond the 30 days, it will require another permit. Good luck. Adios, Pizza Bob- Holster for a 625 JM?
That's because, chances are, they were all made by Ranch Products.- Holster for a 625 JM?
Chris: For the .45 ACP moonclips, Ranch Products is your best source. Only drawback is that they are old school. They have a website, but no on-line order capability. You have to take the phone number from the website and call them. You actually speak to a real human being. It's a cottage industry, so they don't answer the phone in "corporate speak". First time I called them, I thought I'd dialed a wrong number. Cheapest and best clips, outside of the Hearthco $7 each ones - which as Alec pointed out are unnecessary for the .45 ACP. Here's the loading tool I (and Alec) use... http://www.mooncliptool.com/ and here is a good demooner... http://www.brownells.com/shooting-accessories/speedloaders-accessories/moonclip-accessories/extended-10mm-clip-stripper-sku352197100-6727-16388.aspx?mc_id=12000&ch=csh&gdftrk=gdfV21820_a_7c187_a_7c7313_a_7c352197100_d_352197100_d_10094 Have fun with your 625. Adios, Pizza Bob- 1911 holster
Wow, figured you must be psychic - thanking me before I even responded. LOL. If I were you I'd call Balde Tech and make sure that they make a holster for a 6" 1911 - and even though it may cost a few dollars more, if they answer in the affirmative, order directly from them. Blade Tech has absolutely terrific customer service. When they upgraded their website I complained to them that they failed to include a "guest" option for check-out. I got a response from an IT guy who said they were working on it and it would be up in several months. I forgot about it - but after a couple months the same IT guy e-mailed me and informed me that it was up and asked me if I liked it. There was also the time someone on the board complained about a problem they were having with their Blade Tech product and someone from the company responded to them in the thread. Stellar service. Good luck. Adios, Pizza Bob- Hollow Point Ammo
The only thing that remotely resembles what you are asking is that retired LEO's weren't even allowed to carry HP's, but something in LEOSA changed and they are now allowed. One of the retired LEO's on the board can probably clarify the change or how it came about. For us peons - fuggetaboutit. Adios, Pizza Bob- Just a funny moment
Andy: You an empty nester now? I still have your shooting glasses - you'd think we lived miles and miles apart, rather than what amounts to a few blocks. Adios, Pizza Bob- NYC "finest" in action again...
There's that 23% hit ratio rearing its ugly head again. How's that 12# trigger working out for you?- Hello everyone, from Mercer
Greetings from another Mercerite from across town. We have a number of members from Hamilton. Thinking it's time for another Starbucks get together. Watch for a thread announcing it. SRT = Short Reset Trigger SRT = Mopar top performance vehicles Adios, PIzza Bob - Hollow Point Ammo