Everything posted by Pizza Bob
-
Two permits and I could use advice
I forgot to add that you also have to be an empty-nester. Guess that leaves you out for about the next 18 to 20 years. LOL.
-
Two permits and I could use advice
Worn finish on a blued gun just adds character. What do you intend to do with your gun that you are that concerned about finish wear. I have many blued revolvers that have been in and out of holsters (leather & kydex) many times and show little appreciable wear. I have no idea what "brunitroned" is, but yes, you can always have it refinished. Refinishing may affect the value and if done poorly it will also detract from the gun's appearance. My solution is to get enough guns that no one gun gets used enough to worry about finish wear Adios, Pizza Bob
-
STI Spartan in 9mm - Stock question
Tanner's in PA is a stocking STI dealer. There is also Oak Hill Ent. in Ulster, PA - big STI dealer.
-
Two permits and I could use advice
It becomes no longer a blued gun and you get to choose what finish you want to try next.
-
Two permits and I could use advice
Just a couple things of note about the revolver choice. The 686 is only available in stainless. The blued version is the 586. Both the 586/686 are .38 Special/.357 Mag (there are some rare exceptions of the 586 in .38 Spl Only). As was pointed out, the GP100 is (was?) available in .327 Mag. Do not ever use a Lead-away cloth on a blued gun. If there is any thought to perhaps using the revolver for competition, confine your choices to 4", six-round versions. That's it. Adios, Pizza Bob
-
Just picked up ID and 1st permit, want to apply for 2nd...
Actually in the NJSP Guide (that secret book that they won't let us look at) they direct the officer to ask the applicant to consider multiple permits on initial application. Not surprised the guidelines weren't followed. That $18 is not an additional fee - it is the fee for the non-criminal background check (yellow form SBI-212A), that is done in leiu of fingerprinting. If it bothers you, I'm sure that your PD would allow you to get fingerprinted again at $50+ instead. As was said - welcome to the world of firearms ownership in the state of NJ. This forum is a great resource - use it. Adios, Pizza Bob
-
S&W 686 competitor
Do you have to work at being a dick, or does it come naturally?
-
33 Of Your Childhood Toys That Are Worth A Fortune Now
Those are maybe toys of your childhood, but not mine. How about those of us that are old enough to remember Greenie Stick'em Caps and Shoot'n Shells. Fanner 50's, Duncan Yoyos and tops. Hula hoops - the first time around. A Davey Crockett coon skin cap with a tail and on and on and on. Adios, Pizza Bob
-
S&W 686 plus 3"
Is your 686 part of the run of Talo specials? It would have wood grips with the numerals 3-5-7 within the stippled area of the grip.
-
This is a silly question to ask a gun forum..
I think you mean either .44 Mag or .45 Colt. While there are some calibers nominally designated .45 Mag, I don't think Henry (or anyone) ever produced a mare's leg in that caliber. Adios, Pizza Bob
-
For Sale Forum Issue?
Whoa! Frank lives - and, as usual, is 100% correct!
-
.22 Target ammo
You could get 22 different responses to this and they'd all be right. .22 rimfires are very particular about the ammunition they like best. Not just from a functional perspective, but "accuracywise". You could have three identically spec'd guns and all three might prefer different ammo. You need to buy one box of each brand you are considering (and are available) and try it through the guns to which gun likes what the best. Good luck in your quest. Adios, Pizza Bob
-
How do you feel about Taurus?
IIRC, S&W once had production facilities in Brazil - there are a number of Brazilian 1917 .45 ACP revolvers out there to attest to that. Taurus bought the tooling & equipment when Smith left. I would imagine that the original Smith tooling (not the machines themselves) has long since worn-out. I really have no first hand experience with Taurus firearms as I would rather have a used S&W than a new Taurus - but that's just me. Adios, Pizza Bob
-
Where is the CJR&P USPSA Match thread for 9/8?
See how much more complicated it becomes when you have to count to eight?
-
Primer Brands
The only thing to be aware of is cup hardness, if your reloads are intended to be used in any sort of "tuned" firearm. IIRC, the Russian derived primers have fairly hard cups. The softest cup is Federal, which is why some progressive press manufacturers warn against using them. Adios, Pizza Bob
-
What is with malfunctions today ?
Good...for me. How were the sectionals?
-
What is with malfunctions today ?
Don't confuse Brain Farts with weapon malfunctions. My only problem today was of my own making by short-stroking the trigger - which meant I had to pull the trigger 5 more times before the live round came under the hammer again. Of course there was that wall trying to fall on me, but that was a prop malfunction beyond my control.
-
686 SSR - Is it possible to get a longer barrel for this model ?
The barrel that would fit on your SSR would be one from a standard 686, made in various lengths since 1981. An N-Frame (627 and variants) barrel would not fit. But I have to ask why would you spend the extra money for the SSR configuration in the first place, and then want to spend even more, just to make it like a standard model? The SSR was configured specifically to compete in IDPA's SSR (Stock Service Revolver) Division. Revolver barrel length in IDPA is limited to 4.2". While the SSR is less muzzle heavy than a standard 686, that translates to quicker target transition times. Also, be aware that a longer barrel does not make the gun any more accurate (inherent accuracy), but the longer sight radius may make the operator more accurate. If you truly want to go forward with this I would suggest one of two approaches: 1) Sell the SSR - there is a pretty good demand for this model - and then purchase a 686 in the desired barrel length; or, 2) Have the barrel change done locally. Unless you have an FFL ship the gun back to Smith via USPS (for which they will extract a fee + the postage and insurance), it will cost you upwards of $100 round trip shipping by common carrier. Even going through an FFL it can get spendy for transport. Acquire the barrel and have it done locally. Either way, I think you are making a mistake. The 586/686 series is one of the most ubiquitous firearms in their line - having the SSR variant makes it just a little bit more special. Maybe try IDPA before going forward - you have the gun for it. Adios, Pizza Bob
-
What is with malfunctions today ?
Yeah, for some reason I could only get my gun to shoot six rounds before I needed to reload. Oh, wait a minute.......nevermind.
- If I Had a Hammer.......................
- If I Had a Hammer.......................
-
Firearm Surrender and "Gun Buybacks"
Everything you ever wanted to know about how the government rationalizes the legality of buybacks... http://www.scribd.com/doc/93896165/Gun-Buy-Back
-
Holster for a 625 JM?
Sam does do nice work. The Nelson style holster (the one he calls Palmer) has always been one of my favorite styles (MS makes one of these too - a BN55 - as do most holster makers).
-
Firearm Surrender and "Gun Buybacks"
- 1911 Size: Gotta Ask, Full size or Commander