Everything posted by Pizza Bob
-
Pizza Bob: Your Last Revolver is ready!
Oh great, now you have spilled the beans and it's going to cost me even more to win this auction. Shhhhhhh! I'm using this auction as a diversion - I'm actually after that S&W Schofield shown in the photo in the article, but remember, mum's the word. Adios, Pizza Bob PS: BTW, there is no such thing as my last revolver.
-
Transferring a gun with no serial number
Absolutely true. A lot of early rimfires were similarly without serial numbers. However, if the gun had a serial number, and it has been defaced it is illegal to own or sell. I don't think there is any question that all 1903's had serial numbers.
-
My first handgun! S&W 686+ content
From the picture I can see that it is a pinned front sight, not the DX interchangeable one. Not a biggie, as that also can be changed out to a FO - just a little more hassle. Some Smith front sight blades are integral with the base and cannot be changed unless you do a lot of machining.
-
My first handgun! S&W 686+ content
We need to make you revolver savvy. First of all: Pistol = Semi-auto. Second, when you ordered the holster, did you specify, or did they have a selection for the 686+, the "plus" being the relevant part. On closely boned leather holsters or on kydex holsters that are molded, holsters made for 6-shot 686's will not fit 7-shot 686's because the cylinder flutes are placed differently. Third: Do you really want an IWB holster for an L-frame revolver? No personal experience with that particular set-up, but I have carried a lot of guns in a lot of different rigs over my lifetime and that sure doesn't look like the recipe for comfort - but to each his own. We all have a drawer full of holsters that accumulate until we figure out what works. Otherwise, congrats on picking a great first gun - one that will serve you the rest of your life - or at least until you are as old as I am Adios, Pizza Bob
-
Transferring a gun with no serial number
He posted while I was still typing.
-
Transferring a gun with no serial number
PX90 or another FFL will probably be along in a minute, but IIRC, if the serial number was removed to install, for instance, scope mounts, than it must be restamped elsewhere - and I believe that the BATFE might have to be involved in that. Otherwise it is simply a firearm with a defaced serial number which is illegal to own or sell. Run, do not walk, away from that 1903 if that is the case. Wondering if the number is gone because someone was trying to conceal that it is one of the 1903's with the incorrectly heat-treated receiver? Just speculation. Adios, Pizza Bob
-
OBRPC IDPA 11/10/13
Mike: There is an IDPA Classifier this Sunday at Somerset - although entry is limited to 18 people and it's full right now - there is a waiting list you can get on. The week after that there is a classifier at Easton (EFGA). This is a "walk-on" no pre-registration needed. The MD sometimes adds some "scenario" stages and shoots it as a regular match. The MD requires some documentation of competence, so bring your USPSA card or an NRA certificate if you have taken any courses. Here's a You Tube of what the classifier consists of... http://www.youtube.com/watch?v=lcgsd9_cBm8 You will not need a concealment garment for the classifier stages (they break the three long stages into 9 shorter ones), but you will for the added scenario stages. There are usually a couple revolver shooters at the Easton match, although this time I may shoot SSP - haven't decided yet. Adios, Pizza Bob
-
NYC subway shooting, Nikon Style
For just a second there I thought you'd gone all Bernhard Goetz on us. Really a great shot and a great artistic treatment. Ever worry about making it out of the subway with your camera? Adios, Pizza Bob PS: Good luck at Somerset on Sunday
-
Buying Ammo in NY
Too much to go into - hard enough dealing with NJ's laws. This should answer any questions you may have... http://www.governor.ny.gov/nysafeact/gun-reform
-
S&W Model 10. Should I?
Mmmmmmm, GRIZ, no. Nickel is nickel - whether it's the finish or the coin. Both are named for the element from which they are derived - Nickel (Ni on the periodic chart). I think that while some nickel guns may command a premium above & beyond their blued counterparts - and not all do - it is because there are fewer of them out there, because they weren't very popular when they were being sold new. IIRC, there was no difference in cost between a blued and nickel gun and by far and away, the more popular finish was blued. Also, when new, nickel did resist the elements better, but over time they tend to flake as the plating breaks down, meaning fewer survived. Being plated, this makes them harder to refinish. They are somewhat of a novelty today and Smith is using the finish once again on some of their "Classic" series. I think we all agree that the OP did great on his purchase. Adios, Pizza Bob
-
Buying Ammo in NY
It's going to be interesting to see how they enforce an ammo purchase background check, once that element of the SAFE act goes into effect. It's my understanding that NICS, by law, can only be used for firearms purchases, which means that NY is going to have to set-up their own infrastructure and software for ammo background checks - a costly and time consuming endeavor. If they are successful, maybe the federal government could hire NY's IT people to fix the Obamacare website Adios, Pizza Bob
-
High Standard 22 lr
Sorry, I gotta disagree - I think $500 - $600 is high for this gun. While High Standards were/are in demand by bullseye shooters (a dwindling demographic), the ones they want are the higher end target pistols like the Victor. The telling feature is the sight mounted to the slide. The target guns either used a bridge over the slide, or, on older guns, mounted ahead of the slide to preclude the battering imparted to the sight every time the slide cycles. This is a great plinker and I would rank it with a Ruger Mk III Target. Mags are obtainable but that will be added expense. I would place a value on that gun - as it is - at not more than $300. JMHO - not angling to buy it. Adios, Pizza Bob
-
S&W Model 10. Should I?
Put a set of K-frame rubber Hogues on it and it won't matter what butt configuration it is. It was a great buy.
-
Recommend a revolver.
Flame cutting is not an indicator of pressure. Flame cutting in .357's usually occurs when using light bullets in magnum rounds. Usually only cuts to finite depth. Forged frames resist flame cutting better due to the density of the metal. Adios, Pizza Bob
-
Buying guns in a show at a different state?
Prices at gun shows are not what they once were - the advantage though is the quantity of guns to be found there. If the dealer at the show is an FFL, he can sell a long gun to you directly, at the show (providing you have your FPID with you - and you should print out some COE's to take with you also), and you take it home. Handguns have to be shipped (or carried) to a NJ FFL and the transaction completed there - you take delivery from the NJ FFL - for which you need a P2P. Have fun. Adios, PIzza Bob
-
Why I should stay out of gun stores...
Grips are a very personal, subjective choice. Rubber Hogues are far from "flimsy" (and that's an "objective" observation). I generally gravitate to Hogues on a lot of my revolvers. On the ones that don't get shot much, I usually go with a nice wood. For the competition guns I go with rubber. I tried VZ grips on my 625PC. They are small and have great ergos. But being made of G-10, they were punishing with 230 gr ball ammo. Not the texture (mine are checkered) - the impact to the hand. I really like the shape and feel of the grip in my hand - just not so much when I pull the trigger. I have decided to dedicate my 625PC (and now the 627PC) exclusively to USPSA and, as such, have reinstalled my Hougue rubber, Big Butt, finger groove grips on it, and will be ordering another one for the 627. Still experimenting with my IDPA guns (Big Butts are not legal in IDPA anymore). Currently running plain rubber Hogues, but have a set of Hogue Tamers on order. Tamers are the grips they use on the .460 & .500 magnums and feature a covered back strap. Hogue makes so many variations now: Finger grooves, no finger grooves, top finger groove only, checkering and about 5 or 6 other textures - hard not to find something you like. Good luck in your search - I have boxes full of grips, but I'm always willing to try something new. Adios, Pizza Bob
-
What? Another Revolver???
Well I like it! LOL. Appears a little mundane next to the 627 though. Adios, Pizza Bob
-
S&W Model 10. Should I?
Late to the party, but as described a good deal. Hope that you got it. Adios, Pizza Bob
-
What? Another Revolver???
I am not a fan of the grips either - they will be one of the first things changed out to Hogue Big Butts to mimic my 625. I have to say that of the Miculek type grips, these are the nicest I have ever seen - the two halves are book-matched with a nice grain - rare with any Hogues. Will also be getting a front FO .100" wide sight. @Alec: No I won't Adios, Pizza Bob
-
What? Another Revolver???
OK, I can't stop myself. First I stumbled upon a 4" model 624 (.44 Special) and just had to have it. Didn't have any permits, but my township is pretty good with issuing them in a timely manner. Of course we all know that you never get just one permit, so, per SOP, I put in for two, "just in case". That second permit has just been languishing in my glove box for the last four or five weeks. So I am perusing another forum (which shall remain nameless) - not even in the classifieds, just the "Handguns" section when I come across a post inquiring about values for S&W PC guns and a bunch of pictures. Some of the pics misidentified the subjects or had wrong info, etc. They garnered several replies. I noted that the OP was from SE Pennsylvania, so I e-mailed him expressing interest in one of the pictured guns. One thing led to another and, as of this morning, I no longer have the second permit - it is now being disbursed by my FFL, while I try to keep from drooling on this... That is a Performance Center 627-4 chambered in .38 Super. It has a 5.5" barrel and a compensator. That will be removed and replaced with the muzzle cap for competition. As I was negotiating for this, all I could think of was (I believe it was) Raz-O stating that with the USPSA rule change, it's not like people were going to be running out and buying 8-shot revolvers. Truly I had no intention of doing just that. I just didn't want the hassle of the expensive moonclips or the extreme (read that Alec) of using .38 Short Colt to help obviate cartridge wiggle and speed reloading. But the .38 Super round precludes that whole debacle, plus I have a great source for ammo using the same load the AMU uses. The pictures show it in stock configuration. I have to purchase some items to "make it mine". One parting shot - I don't know if this was ever fired (it wasn't by the person from which it was purchased), but it absolutely has the best DA I've encountered on an out-of-the-box revolver - so good that I'm not even going to fool with it. Gotta go burn-up the Internet buying geegaws and gimcracks for the new toy. Adios, Pizza Bob
-
AR Scopes M-223 2-8 vs. Monarch 2.5-10
I have one AR close and mid-range mounted with an EOTech. I have one strictly for medium to medium/long range and I went with the 4-16X. Of course I have old eyes and "one-hole" disease, so it suits me. At 100 yds and beyond it is hard to imagine having too much glass. Of course my father shot groundhogs out beyond 400 yards using an old Weaver K8 scope, so I guess it's the Indian, not the arrow. Adios, Pizza Bob
-
Recommend a revolver.
See post #43 in this thread
-
243 cal rifle?
Trust me if you're in the woods all day, that 5 pounds, in addition to your BA rifle, will seem like 50 by the end of the day. Maybe carry a handgun (revolver) for those close-in brush shots. PA has a sportsman carry permit that allows you to carry a handgun while hunting.
-
243 cal rifle?
No, it's based on the .308. Just necked down to 6mm. If you know where you are going to hunt, then usually one or the other, depending on terrain. In mixed terrain it is easier to use a scoped bolt action rifle, set on a low magnification, for a brush shot, than it is to take a 200 yard open field shot with an iron-sighted lever gun. JMHO Adios, Pizza Bob
-
5 Star Firearms?
Ruger sells the HKS 36A's for the LCR. Their only caveat is that it will not fit with the Crimson Trace laser grips.