Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. A recent thread made me remember this story, and I honestly dont think anything can compare to the levels of stupidity and lack of safety. I was at Easton Fish & Game on the 100 yard rifle range. The line was called cold and everybody goes out to change targets. When the line is cold you must not touch any firearms. Earlier in the day, I was shooting my 1919a4 (belt fed) off the tripod a little ahead of the firing line because I was the only one there. So, I asked Anna (girlfriend) to pick up the links/brass on the ground while I did some other stuff. So she is ahead of the line, and directly in front of this one bench. Mind you, the line is still cold, the last of the people are starting to come back but she is clearly RIGHT in front of this one bench. Well, this guy sits down and starts thumbing rounds into his 30-06 deer rifle while it is pointing directly (like, dead on) at Anna's face. I asked him WTF he was doing loading the rifle and brace yourself for his reply.... "I'm not loading it im just putting bullets in it" I could tell from the beggining this guy was a little "off", he was shooting his 30-06 scoped rifle at 100 yards at a 14x14" steel plate..... so dumb. So yeah, after that, we packed up and went home. The guy was trash, I was afraid if I continued yelling that he would shoot me or something. SO...share your safety fail story!
  2. Those kind of stories hurt my brain!
  3. I got a 10/22 and love it. When I first got it, while it was still in its preserving oil I fired 1,050 rounds through it without one jam before cleaning it. I now pick my ammo out of the misfire can at the range and it eats it up. Most of the stuff just has light strikes from tricked out guns with light springs. Accuracy is bleh with mixed brands/velocity but I plink a steel swinger so whatever
  4. No, they didnt even check his LTCF. Besides, checking to see if he has a license is illegal anyways (terry stop) And the first move by the cop wasnt "May I see your license" (which would be illegal, anyways) but gun drawn. And to top it all off, why would he want to see his license? The cop said it was illegal either way
  5. Pew Pew Plates replied to Edge's topic in Rifles
    I want...
  6. Each station you will shoot 3 report pairs, meaning you load 2 rounds and when you fire the first round, the second clay is thown. An o/u is perfect because you can have 2 different chokes
  7. if it was done properly, I'de say dont bother trying. Blind pins go through the threads into the barrel a little bit then are plug welded. Finding dead center will be very very very hard. Then knowing when to stop in your barrel is another issue. Even if you get it out, will it unscrew without buggering stuff up? Its called permenent for a reason...lol
  8. Another soon to be happy S&W 1911 owner
  9. +1, thats how you do it
  10. It isnt a pistol grip, its thumbhole. So you can have one evil feature, lug or removable device
  11. I think they are firing them out of 12GA pump guns A .223 rubber bullet would -not cycle the action, so it would suck in any auto .223 (which is EVERY .223 used by the military) -would probably penetrate skin due to small size -probably wouldnt feed either, even if it matched the profile of a ball round Those are all the reasons why they use 12ga pump guns for these. They can make them big and slow flying, not worry about cycling the action (since its pump), and not worry about feeding due to the design of a shotgun/shell "The M-16 is a 5.56mm weapon, which is too small a caliber for an effective non-penetrating round. If you fire a 5.56mm projectile slowly enough that it won't punch holes through people, it won't have enough energy to do much of anything at all. It would be the functional equivilant of a BB gun. "Rubber bullet" rounds for the M-16 and similar weapons are steel spheres half an inch or so in diameter coated with a thin layer of rubber or plastic. They are loaded, singly and from the muzzle, into a cylindrical tube attached to the barrel of the weapon, and launched by firing a blank cartridge from the rifle. "
  12. Both are legal in stock form in NJ. The PSL has to have either a welded muzzle brake OR the bayonet lug removed/disabled (they usually come like this no matter what state you are in, though) Steel case has nothing to do with having to clean it after, that only matters if the ammunition is surplus which is usually corrosive in which case you must clean it as he said. Surplus tends to be steel case so that may indeed be what he is talking about...but not all steel case is corrosive (wolf isnt) As far as full auto goes, none can be legally converted. Neither were originally full auto, either About the PSL, I may know a thing or two about one
  13. I have an entire pallet of white flyer full orange clays, non bio in plainfield if you want to swing by we can work something out
  14. Is it an aftermarket hider? Because the stock muzzle devices are brakes. Also make sure your bayonet lug is nuetered otherwise your muzzle threads/removable device is illegal.
  15. I reload montana gold 124 grain JHPs for all around 9mm ammo since it is barely more expensive than 115 FMJ. -Most barrels shoot 124 better -124 feels better -JHP shifts center of gravity to rear, more accurate -JHP punches cleaner holes -due to method of construction, they have a jacketed base too which is perfectly flat. This makes it cleaner and more accurate -FMJ/JHP is 100 times more accurate than plated, accept no substitute for true FMJ/JHP for .45 I use 200 grain SWCs. -Cast lead is more accurate than FMJ in theory (cant be voids under the jacket if there is none!) -SWC punches cleaner holes -cheap -infinate barrel life
  16. Well, they are exempt from state firearm laws and since they wouldnt sell from the factory either way, it doesnt matter to them.
  17. Its like asking "why do you own so many shoes" Usually the asnwer is "because I want that many" or because "They all fill a different role" or "because I can". This is of course if you are dealing with women. You can of course subsitute shoes for golf clubs, cars, etc Then you just say, well, thats why I have so many guns.
  18. I have heard nothing but good about their over unders. I was considering one and did lots of research on their whole line of over unders and the reports are very favorable. I have handled one and I was impressed. Would up going with a Browning Cynergy though (love at first sight)
  19. I'm going with my 500, and my friend is coming, whom also will have his 500. Prepare for concussion I should be there 6ish
  20. The question remains...would you volunteer to be shot by one? FYI, in NJ, they ARE guns
  21. www.jgsales.com www.aimsurplus.com those are the two usual suspects
  22. Wow, never knew the temp could affect it that much. As far as shot quality goes, I wanted to avoid making the article any longer than it had to be. I mention that you should test every load.... this is why. Also, another thing is when you are calculating pattern density the anitomy of the shot affects how many pellets are in each ounce. I can get significantly more west coast #8 shot pellets into an ounce than I can eagle. However, using the provided numbers should be good enough.
  23. yes but that drum cannot feed ammo into the gun. It is a round device that holds 15 round belts (magazines). If I have an ammo can and throw in 10 15 round AR magazines, it is the same thing. Its like saying that this would be illegal even if it only contained 15 round belts. Its just a box....it does not feed ammunition
  24. As featured on njshoot! How to Pattern Your Shotgun (and why your choke may be lying) Patterning should be the first thing you do when you take possession of a new shotgun, however all too often I talk to people who don’t even have a clue what their shotgun has for a choke! Patterning is critical, because while your choke my say “modified” on it, how do you know it delivers “modified” performance as far as pattern density? The only way to find out is the pattern! The first step to patterning is to grab yourself some big paper. 40x40 inch is the recommended, but I grab old drawings from work which are 36x48” and work just fine. A freestanding patterning board is ideal, but even an old pallet propped up with a stick makes a great holder for this size paper, too. The dimension of the paper isn’t terribly critical, however what IS critical is your distance from shotgun to paper. Shotgun patterns widen the further out you go, therefore if your choke should deliver 70% pattern density at 40 yards, it will pattern looser if you throw the board up at say…50 yards. This will skew your results. Get yourself a BIG tape measure and measure out 40 yards. The more exact you can do this the truer your results will be! At the range Now we get to start shooting stuff! Ideally, you will pattern every load you may want to use, out of every shotgun, out of every choke. This can be a daunting task, because if you have 4 chokes and 4 different types of ammunition to pattern, that’s a whopping 16 different combinations to try. I recommend you shoot 3-5 patterns with each combination so you get an accurate representation. So you are looking at 48-80 sheets. This is not a process for the faint of heart. Set up your target at 40 yards and draw a POA (Point of aim) that is in the center of the target and just large enough to aim at. Put your shotgun on a rest (yes, bench resting your shotgun!) and carefully fire ONE round directly at your POA. Now, write something on the top of your target so you know which way is up, and write on the target what shotgun, choke, and load was fired at it before you forget. Repeat as necessary! Understanding the data OK, so now you are home, exhausted, and have a massive pile of huge targets with tons of little holes in them. Now what? Well, now comes the fun part.You need to create a 30” circle around the densest portion of your pattern. NOT around your point of aim, but around what you feel is the center of your pattern. You can do this one of two ways. First way is cut out a 30” circle of cardboard with a hole in the middle. Put it over where you want, mark the center (important) and trace it. The other option is use a 15” string and pencil. Either way, make sure that you mark your center for the next step. Now you quarter your 30” circle. Just draw a horizontal and vertical line to divide it up into 4 sections. Following that, count all the holes in each quarter and white the number down on the paper. It helps to tick off the holes as you go. Now you take those 4 numbers and add them together, and put them with your notes on the side. This is your total pellet count. Now you are ready to finally evaluate your pattern. First and foremost, just looking at it you want to see an even distribution of numbers across the 4 quarters. In a perfect world, you want 4 of the same numbers which would mean you pattern is evenly distributed…perfectly. Also, you want to look at how your pattern is aligned with your POA. For a field gun you want your POA to be the same as your POI (point of impact). Lots of trap shooters like to have a 60/40 pattern for rising shots which would mean that 60 percent of the pattern is in the top 2 quarters and 40 percent is in the bottom two. Evaluate your pattern accordingly. You also want to look for any big gaps in the pattern that would allow a target to fly through. The final step is calculating pattern density. This is how you ascertain what choke your load/choke/ shotgun combo is actually shooting. To determine pattern density you divide the total amount of holes in your 30” circle by the total amount of pellets in the loaded shell Here is a table showing the pellets/oz. Shot#, Pellet Diameter (Inches), Average Pellet Weight (Grains), Approximate # of Pellets per Ounce 12 .05 .18 2385 11 .06 .25 1750 9 .08 .75 585 8 1/2 .085 .88 485 8 .09 1.07 410 7 1/2 .095 1.25 350 6 .11 1.95 225 5 .12 2.58 170 4 .13 3.24 135 2 .15 4.86 90 BB .18 8.75 50 And with that, you can then get your percentage and see what choke your gun is actually shooting at. This is all assuming testing at 40 yards. Cylinder %40 Skeet 1 %45 Improved Cylinder %50 Light mod %55 Modified %60 Improved Modified %65 Full %70 Extra Full %73 Turkey %75 plus So there you have it! Don't be surprised if your “modified” choke actually shoots like a skeet choke, or even a full choke. Anything is possible! This is why patterning a shotgun is essential. If your modified choke performs like a full choke, you do not need to put a full choke on for those further out shots as you will be over choking your shotgun. Decent pattern. Note the top is marked, and the circle is centered on the most dense portion of the pattern. The big black criss-crossed circle was my aiming point.This pattern shows that the shotgun patterned slightly low on this particular shot but has decent distribution.This comes out to 73% which is extra full performance that shot out of a tube with "modified" restriction.There are some undesirable voids. Here is a pretty lopsided pattern out of my Mossberg 20ga. Notice the very uneven distribution and how it is somewhat off center. This is a gorgeous pattern! It is off the POA but this can be due to thing like wind, poor aim, or just poor judgment when making the circle. Note the vey even pattern with no voids. This pattern is 56%, out of a "modified" choke so it actually fell 4% short of what it should pattern at. You can even go so far as to create a spreadsheet to compare loads. Below is a sample of mine. For the 20GA loads at the bottom you will notice notes such as “Full +1”. This is because that particular shotgun had a c-let adjustable choke and I was experimenting with cranking it tighter than full to see if I could get it to choke down more, because of the previous poor patterns. This is a GREAT example of why to pattern, because after this I would NEVER rely on this shotgun to take long shots. Why patterns matter Finally, a brief note on choke tube selection. I prefer the extended choke tubes, and this is for three reasons. My primary reason is ease of changing. If you ever shoot sporting clays and want to take it seriously, you will most likely find yourself changing chokes every now and then. With an extended tubes, you do not need a wrench because you can just grab it and twist it out since it extends out the muzzle. The second reason is ease of identification. It is easy to lose track of which choke is in your shotgun, and most extended tubes are clearly marked on the extended portion. The third reason is pattern quality. Since the constriction takes place over a longer distance it is less likely to deform your shot and degrade your pattern. Once you have patterened your shotgun and are intimatly familiar with your shotgun, you will find yourself changing your chokes all the time for different shooting distances/styles for maximum advantage. This is when you will really want to have the extended tubes for ease of changing, and while your at it, pick yourself up a nice choke tube case to keep them in. If your pattern is less than perfect Now, what do you do if your results are not acceptable to you? If your patterns have voids or are uneven, it can be a factor of the shotguns barrel, the choke, or the ammunition. To determine which it is, simply utilize process of elimination. Try your choke in another shotgun which has an established performance. If the other shotgun patterns poorly with your choke, then your choke is the issue. If it patterns fine with your choke, go ahead and try your ammo in that shotgun. Again, if that yields poor performance, the ammunition is your problem. If that patterns fine, it is a safe bet that there is something wrong with your barrel that is contributing to poor patterns, such as a poorly done back-boring, the forcing cones are messed up, excessive fouling etc. However if your issue is a point of impact that is very far off of your point of aim, your best fix is to sell the gun. There are a few fixes but all are complex and beyond the ability of a tinkerer. A non ribbed barrel can be bent, but I would leave this to a professional. You can also get Briley to cut you an eccentric choke, which is another expensive proposition and it would have to be carefully indexed every time you put it on. As I said before, your best bet here is to sell the shotgun and obtain something with better performance. Extended choke tubes, tube cases, wrenches, and a refrence chart from the choke manufacturer stating theoretical pattern densities. The ultimate in being prepared is having an over/under style shotgun where you can have two different chokes on the gun at the same time, and being able to select which barrel fires first! This is especially advantous if you are doing doubles at a sporting clay course. For example, say you have a report pair. This means that once you fire your first shot, a second clay is thrown. Lets say you have a pump action 870 and a wide assortment of chokes. The first clay is a crossing shot, very close and right ahead of you. The second clay is thown from 20 yards ahead, and goes away from you. You can only select one choke. Which do you chose? If you chose a cylinder choke you will be best prepared for the first clay, however the second clay will be nearly impossible. If you chose a full choke you will have a very difficult time hitting the first clay, but it lets you reach out to the second clay. A modified choke will make each possible, but both would be moderatly difficult. Having an over/under allows you to put on a cylinder and full choke at the same time, and then you can chose to fire the cylinder choke first. This way, your close shot you pull the trigger and the barrel with the cyl choke lets loose on the first clay, and then you fire the barrel with the full choke at the distant clay. Knowing your shotgun and your chokes is important so that you can get the most from your equiptment. Whew! Hope that was somewhat informative! Oh yeah, and I know that the guns laid on the paper dont match the patterns, they are just to keep the paper from rolling back up!
  25. you need a S&W 1911 for it to cuddle up with

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.