Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. Useless? I'll take you on with my mosin vs your mossberg 500 at 500 yards and we'll see which gun is useless
  2. You wont fit a double charge in a 9mm case with bullseye, I tried it once to see what it looked like. Fills it to the mouth.
  3. I use mostly millermatic 350Ps but they are a little budget non-friendly lol, if you want to try one out feel free http://www.millerwelds.com/products/mig/product.php?model=M00151
  4. Yep, mine is .45 ACP...and I love it!
  5. Chrome LINED is good for sustained full auto fire, and corrosion protection. Accuracy suffers very slightly. Easy to clean. Dont buy it for the corrosion protection, because you still have to take care of the rest of the rifle anyways. Chrome MOLY barrels are not chrome LINED, they are a special steel. They are a strong wear resistant alloy but somewhere in between "normal" barrel steel and chrome lined. Neither adds weight
  6. I'de try and find someone with some more serious equipment than a little flux core MIG. If the machine you are looking at ONLY does tacks(spot welder), I believe it will only work on sheet metal.
  7. You want a very slight taper to the crimp, hence, "taper crimp" not "flare-remover". Roll crimps are great for holding a bullet from pulling OUT due to recoil in a revolver and taper crimps are great for keeping the bullet from pushing IN during chambering (and keeping headspace). If a crimp wasnt needed, you could just post-size the flare out.
  8. So why do we have SWAT?
  9. How is that savings? 8lbs of varget + tax at that store: $169.60 grafs: $150 5,000 CCI LR primers at store: $160 grafs: $139 Savings: ~$40 minus hazmat: $25 Total savings: $15, plus not having to drive anywhere (gas) The more you buy on top of that order, you will save even more
  10. Weird hours, impossible to get in touch with. Stopped by the store once, its an unmarked garage in a gravel lot. Nobody there. Went to the house that was at the adress which did wedding dress alterations or whatever, woman said its her husbands bussiness and to come back later and they dont pick up the phone
  11. I dont know what you are doing wrong but tis $25 with 4.95 handling for grafs. And with the free handling coupon (i think its "blue") its a flat $25
  12. law says you are expempt from the 1,000 foot gun free zone if you hold a license in that state. The way reciprocity works is your license counts as that states license. Think about it, its illegal to carry concealed in PA without a PA LTCF. Licenses in the reciprocating states count as a PA LTCF. So the argument is up in the air and not conclusive as to if the florida counts or not as far as the expemption goes
  13. It will cost less to buy online, if you buy enough. grafs is the best for hazmat stuff
  14. yes BTW, PAFOA is a great place to post questions like this. You always follow the laws of the state you are carrying in, so a PA board would be the best place to inquire about PA law. Just be prepared for 10 page legal arguments
  15. Try some higher quality ammunition, I bet you will notice a difference. Brown bear is great for blasting but when you want to see what your rifle can do, it wouldnt be my choice.
  16. For general stuff I try to meet public, however the buyer of a firearm will have your adress anyways from the paperwork so you may as well conduct the transfer at your home.
  17. no, only silver solder or welding are considered acceptable. Those are the standards the ATF uses, of course NJ doesnt define permenent although going by the ATF guideline would probably be a safe bet...
  18. Unfortunatly that is not mine, but I may refinish my SAR and match it to that. Its too awesome...
  19. Yes its a seperate die.
  20. he has a lee FCD for crimping. Tony, setting up the FCD is basically the same. Set the die, lock it in, back out the screw. run the case up, look at it, if more crimp desired adjust the screw down. For 9mm you need JUST enough crimp so that you can barely see it. To test if it is enough make a dummy round, load into your magazine and chamber it a few times. If its shrinks, not enough crimp. If it doesnt shrink much(a TEENY bit is ok) then your in the clear.
  21. You can get away with alot in parades. How do you think re-enactors carry pistols? Doubt there is an exemption, however you get away with it. One year I saw a guy with a live M1 carbine in a parade
  22. set up your seating die as the instructions say. Then once its locked down, back out your top screw almost all the way out. Then place a case on the ram with a bullet on top and run it up into the die. Screw down the adjustment untill it stops on the bullet. Retract the case/bullet and screw the adjustment down a little bit, run the case up(it should now seat it just a teeny bit), measure, repeat (adjusting the seating depth down each time a little bit more). Keep going untill you reach your desired depth. Go somewhat slowly, since once you overshoot your mark you have to pull the bullet and start over. Does that make sense?
  23. be careful, if you have a pistol grip on the rifle already it is illegal with the threaded muzzle until you get something permenently attached

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.