david8613

dtuner thats sharp!

i went to the range over the weekend with with my sig p226 40 cal and glock20 10mm. while cleaning them i noticed my sig had some pretty ugly burn marks under the slide. the weird thing is i shot the glock20 way more that day and she has no marks? sig sig sig glock

can't we get something solid that is legal or not?

xds have small grips..ever tried them?

thank you, thank you very much...

I have been reading this thread, im in the middle of a build myself, interesting stuff guys... I'm new to ARs but not new to mountain biking, I have been doing it for over 13 years, one thing I have learned is you can never "have your cake and eat it too" it's very very difficult to have light weight and ruggedness on one bike, you either have a light weight racing bike or a heavy duty big hit bike, if you try to do both in one bike you end up regretting it, and let's not even talk about Budget just my front fork and rear shock run close to 2,000.00

i got it off! HELL YEAH! here is what i did, i took the barrel left in the freezer over night, i went to home depot to buy a nice new hammer, a big pin punch, and this stuff called pb blaster a strong penetrating oil. i took the barrel out the freezer put it in my vice, i hit it with some heat between 30 to 50 sec. and i hit it three times with the new hammer and large pin punch and out she came. didnt even need the pb blaster oil. the gas block is banged up, got a new one one the way not sure if im gonna use it yet. lessoned learned DO NOT START TO ASSEMBLE UNTIL YOU HAVE ALL OF YOUR PARTS together.

yeah she looks like she needs to be pressed out, i gave it some good wacks, and i tried twisting it with some lube and a wrench in a vice last night, zelch! she is on really good...

man that sucker is on super tight, I put my barrel in the freezer, got it nice frozen, took the torch to her NADA! wrench, hammer nothing is working... I'm scratching up a brand new barrel, I'm pissed... I don't think the wood is gonna work.

I tried that didn't work, scratched the barrel a little doing that, man it's tight...I got it in the freezer now, I'm gonna see if I can apply heat to the gas block quickly and wrench it off verses banging it out, this sucks balls... I was so close to getting her built...

ok here is what i did please dont laugh!!! i put my low profile gasblock on before i put my barrel nut! duh!!! what was i thinking? thats what i get for rushing... but here is the kicker my gas block was very tight to begin with, it didnt want to just slide on like others I have seen. so i did the heat the gasblock on the stove for 2 mins proceedure and dropped her right in perfectly, but know im trying to get it off my barrel, i used a propane torch to heat the gas block again, not working. i destroyed a piece of wood dowel, i mangled a new hammer, i even used a heavy hammer and dented it slightly and the stupid dam gasblock wont even budge!!! im about to attack it with my dremel on the high setting!!! i swear, I will! any advice?

HOLY SHIAT, i feel like gomer pyle!!!

this was my daughter and i last year...

this is most disgusting but funniest costume i have ever seen!

just did mine, on vltor emod stock. just when i finished the drill bit broke in there, stock doesn't move at all so she is done...hey rob nice build there, what the length is on your barrel and rail tube?

got it out, thanks it was dry... tried pushing it out didn't work at first so, I kind of shook the upper like a can of spray paint, and then I was able to push it out as described...whew!

i know this might sound dumb, but how do you remove your bcg without the charging handle? my charging handle is coming in the mail tomorrow last part of my build and i got to anxious, and now i cant get it out...

thats pretty nice, how much did that run ya!

man I was just shooting my 10mm glock 20 3rd gen this weekend, she, runs flawlessly with all kinds of ammo good and even with the cheap stuff, no problems at all!

its my barrel! lol! but if you want to know who made it its dez arms. they make some really cool barrels and ship extremely quick... I know I know before anyone says anything it's not chromed lined, but I'd rather have a little more accuracy vs easy cleaning, it's not like I'm gonna be shooting thousands of rounds a week... http://www.dezarms.com/index2.html http://www.shop.dezarms.com/category.sc?categoryId=12 http://www.shop.dezarms.com/product.sc?productId=155&categoryId=12

yeah, i called him back already and told him i would pick it up tomorrow... i doubled checked alot threads, and i did it right... I thought this was a cool read... http://deltaschooloftrades.com/stick%20essentials.htm

hi guys need a quick opinion, I did the first part of my brake pinning project, I drilled a Hole in my muzzle brake, I dimpled the barrel, I then threaded the hole, I put a little Allen screw in the hole, the screw was sticking out a little so I counter sunk it, figured it didnt matter and would make it easier for weld to drop in. i made sure it was good, I took a wrench to the brake it didn't move at all. anyway I took my barrel to local gunsmith to get a drop of weld but I was told it was done all wrong, that I should have left the screw sticking out so the weld will drip around it, that I should have used locktite that I believe is not totally necessary by law as it is written, he said some other stuff bla bla bla, he wants to charge me 55.00 to redo it, I left the barrel there for him to do the job but it kind of left a bad taste in my mouth driving home... here is a pic of the work I did which I thought came out really nice. do you think I should just get my barrel back and go somewhere else for a quick drop of tig or just get a simple welder from harbor frieght which im leaning towards or should I just let him redo it his way either way it will get done but I just wanted to do everything on my first ar rifle build myself...

agree, talk about fluted barrels?

me too!