Everything posted by Scrap
-
Let see those Rimfires. =P
Chaloots Ito be sure , you're Rollin deep at the range lol! I love the pics n
-
Source for 10 or 15 round Mags, single stack 7.62?
Ok my man see now you're speaking my language. An armorers I am not, but yep, for 6 or$8 a Mag I will play with it / file it / rub it sensually with bore solvent like hoppee's and then massage it with rem oil :-p whatever. , cause they're cheap nzastava wants mucho dollas for a mag, which in my humble opinion isn't nearly priced fair. Shoot Dicks wants 17 buckaroos for a damn ministure mag. 10'rds rem 597' .22 Sheesh!!
-
FTE with 40-9 Conv. Barrel - G23
Hey Guys, I have a couple hundred rounds through a new G23. Last nite, I finally tried out my Lone Wolf 40-9 Conv. Barrel. Just for facts to be straight, had not shot the G23 in a while, it was completely clean and lubed, and I did not fire any .40 S&W last nite beforehand... Anyway, loaded the Conv. Barrel and Glock factory 9MM mags... First magazine, 15 flawless, accurate rounds. Second magazine, after maybe the 6th or 7th round I had a FTE... the empty shell casing stuck in the ejection port, preventing the slide from completing its action. Like I said, I think I have a little over 200 rds of .40 S&W through the Glock, and never a speck of a problem. Anyway the FTE scared the shtuff outta me because I've never had a problem before. But I racked the casing out, and then just to extra careful I tapped, racked again and ejected the next live round just for safe measure, and after that I was fine and went through a few more mags of 9MM. I'm just asking a few opinions and looking for confirmation, this is not a big deal and occasionally to be expected, right? I think I remember reading you have to expect a problem here and there because the extractor and/or ejector isn't really made for the 9MM round... and thats why you would only use the conversion barrel and ammo/mags at the range because they aren't 100% and you use the original caliber / equiptment for HD. So this is no big deal, right? And let me say the Lone Wolf 40-9 barrel was redonkulously accurate, I shot very well, and I like the 9mm savings. I am considering seriously adding a Lone Wolf .357 SIG Barrel as well... But I have no experience with .357 SIG... I hear that I can use the Glock .40 Magazines tho, and it's got a nice punch without too much more recoil that I would experience with a .45 ACP... What are your thoughts on .357 SIG? I was raised a .40 guy, and I bought the 40-0 Barrel for both SHTF/emergency flexibility and primarily ammo savings at the range, but the .357 SIG would be more for simple shooting fun and to have a single gun that fired all 3 calibers... Any thoughts?
-
Source for 10 or 15 round Mags, single stack 7.62?
tuktuk my man, I thank you much for the info, but are you sayin that I *can't* use the WASR 10 rd's from century? How hard is all that work you said you did cause an armorer I am not, but I was about to buy some? Thanks my man.
-
Let see those Rimfires. =P
Ready Aim Fire told me today that my 15-22 was the "coolest, baddest ass AR I've ever seen... " and the other guy "MAAAN! LEMME HAVE A LOOK AT THAT! " and he was gonna help adjust my red dot sight, alas, no allen wrench that fit.. and he says "MAN, Brotha, you put an Aimpoint on this, or maybe an EOTech or Trijicon, WOW! LOOKOUT! IMAGINE THIS WITH AN ACOG! " Yeah he even got me excited. Except I am now poor, so no optical upgrades forthwith. NcStar woohoo! ;0)
-
Let see those Rimfires. =P
lex I noticed a couple of things that I am taking from your pics, thank you. First off, I noticed right away one pack of XTM rail covers doesn't damn cover one side of the 15-22 rail like they told me, so I would up with full sides, a few on top, and nothing on bottom. I would have been smart to skip a rail notch here and there like you! also, I wanted to make a "Random Digital Camo pattern" so I threw all 4 packs on a box, shook up, and just grabbed pieces. And it resulted in a predictable looking pattern. But that's okay, it was random to me. Also, I would be interested to know how to get the stock done, thank you much! and looking good as well BTW, looking good.
-
Scored a Benelli Super Nova Tactical today
Jonf I will say, when I got my Supernova at Dick's, they had a regular Nova, in light-ish camo, with like a HUUUUGE barrel, this mother trucker would have sniped hajji's in Fallujah from rooftops... I guess I'm not a hunter and if I was, it probably wouldn't be birds , but this mama jama was BIG.
-
Scored a Benelli Super Nova Tactical today
Jon I have not put any 3.5" through, but it was a selling point for me... I doubt I'll ever USE it, but it did make me feel good that if SHTF , anything marked "12 Gauge" would work... Besides extreme hunting what would 3.5" be useful for, tho, really? Esp. from a tactical shotgun point of view. I am a big fan of Hornady TAP buckshot, real nice...Dick's was closing them out at $7.97 a five pack, which is nice for premium HD 00 Buck. (at 2 3/4" that is)
-
Source for 10 or 15 round Mags, single stack 7.62?
Thanks much for the info, but a wise man knows his limits and I am not technical enough for that... an armorer I am not. I am cool with single stack if I could find them. That $8 deal was too good to be true. Doh
-
Let see those Rimfires. =P
This is my S&W M&P 15-22 , with a bunch of new additions. Mostly Magpul, got on a Magpul kick one night about a month ago... Magpul BUIS in OD Green Magpul MOE Stock in OD Green Magpul Angled Foregrip in OD Green Magpul XTM Rail Covers NcStar D4B Reflex Red Dot I'd like to do some more but that's about all I can afford now, I'd say that bad boy's done for a long while. I really would like to get a Magpul stock but... here's the deal. Magpul says, can't do it on compliant version, don't do it. S&W guy said not only can it be done, he did it, but used a different brand of stock other than Magpul and was very careful. I'm not at all capable of it so I'd be shelling out somewhere between $70-$130 depending on Magpul model of stock, then whatever I'd be charged if/when I found someone to do it. So it's back burner. I'd also like a better optic but, two schools of thought, I already spent the $65 on it, what's wrong with it, and it is only a .22, what would I really do with a ACOG/Aimpoint/EOTech on it, really? Love it have one but again, when is enough enough? Anyway just thought I'd share my "new and improved" 15-22 VERY BIG THANKS to kenw for the photo help/expertise... I am very grateful. And hope you dig my rifle, I have built up a nice "portfolio" of "Guns" but have run out of "Gun money" . .. LOL.. and as much as I would LOVE to have Bruce Willis's M4A1 SOPMOD from "Tears of the Sun", maybe even a Colt MT6400C or even S&W M&P 15... I am settling for my customized S&W M&P 15-22 SCRAPMOD.
-
Source for 10 or 15 round Mags, single stack 7.62?
Anyone know a good source for mags? I have a 7.62 single stack Zastava PAP, I read maybe here or some other forum, somewhere in Colorado had a compatible mag for like $8 bucks, but out of stock permanently. .. So if you know of any, please let me know? I could also use a line of some good and cheap 7.62 ammo?
-
Scored a Benelli Super Nova Tactical today
That is very very nice. When I bought my Benelli Supernova, I was looking and wanting the Tactical model. On St. Patrick's Day I was in Dick's in Fairless Hills and I have given up drinking, and I wound up deciding I would have spent a few hundred that night anyway if I went out, why not get something worthwhile? I would up getting an INCREDIBLE deal on what is apparently the most expensive Supernova in the books (with the exception of the camo models) , with the 24" Fiber Optic-sight barrel, SteadyGrip pistol grip, etc. so I bought it , and was psyched. But after the initial excitement wore off I was never completely comfortable with it. I'm not the biggest guy in the world, and that 24" barrel is just too long for me to be swinging up and pointing in HD situations. It was drilled and tapped, so I figured I would just buy a Ghost Ring barrel and have a ring installed on the receiver, but the cost of the 18" HD Ghost Ring barrel was about $200 more than I paid for the entire shotgun and about $20 more than I could go out and BUY an entire Benelli SNT. So I was a little jaded from the get go. I didn't buy the Benelli M2 Tactical I fell in love with in Jan, then I bought a Supernova but compromised on the config, and just never was happy. I am very jealous of yours, it looks very sweet. Just what I wanted, really.
-
How do I sell a gun to someone?
LOLOL... S&W 15-22 and Benelli Supernova... I love both, have never fired either, and I *REALLY* want a Colt M4 i.e. Match Target? I bought the 15-22 and the Supernova cause "everyone was doing it" over on GlockTalk... but I really have always wanted a Colt M4...don't have the cash so I might have to sell some stuff off. BTW THANK YOU ALL for the help it was GREATLY APPRECIATED!
-
How do I sell a gun to someone?
- How do I sell a gun to someone?
maksim thanks, but I'm a little slow and stupid, could you go into a little detail? If both ppl are in NJ and both have FID, is there paperwork needs to be done? Who does what, etc... I'm just a little confused after reading that guide.- How do I sell a gun to someone?
Could someone please explain to me how "Face to face" sales works? I.e. iF i decide to sell a longgun to someone in NJ what do I need to do? I have no idea honestly, so as much help as possible would be greatly appreciated. Thank you Sir(s). -Scrap- Let see those Rimfires. =P
I'm loving this... I have a thing for .22LR/Rimfires... keep this comin... GIMME DA .22LR PRON!!!- Saiga-12 Legality
Sorry sorry, didn't clarify correctly... I meant I was about to get a Saiga-*12* ... in addition to what I got I almost bought the Saiga-12... it was pretty cool. Still might...I love and hate my Benelli at the same time... so I might wind up with something else, and it might be a Saiga-12- Finally got that Aimpoint Micro H-1...
I'm very interested in this!!! You've a lot more money than me, cause I couldn't afford the Saiga I wanted ,so I bought a Serbian Zastava, and I couldn't afford an Aimpoint so I got an NcStar... However I am extremely happy with the rifle, and it's pretty much as good as the $1000-$2000 AK's out there, so I am thinking I might buy a better optic! Could you tell me all about your decision/process for getting it/etc. or could I PM you/ even better Email you? Thanks!- Let see those Rimfires. =P
Man that Walther is SWEET.... I have had a SERIOUS itch for a walther for MONTHS now... but alas no more handgun permits and its such a PITA.... But that is an sweet awesome piece... Nice.- Saiga-12 Legality
I almost picked one up on Tuesday, I got a Zastava AK but I came close to getting the Saiga on general principle... Seems really cool.... Never fired one but they look awesome. I might wind up adding this next to my Benelli Supernova and Mossberg 930 SPX ....they seem awesome.- Tell me about GSG?`
I absolutely have NO USE for the GSG .22LR that's a completely knockoff of the MP5... ...but I WANT IT... I am such a .22LR hewer... I just seem to collect these things... What should I know and/or what can you tell me before I buy one/- JUST GOT A ZASTAVA PMP... TEH HOTNEZZ!!!
LOL sorry for insulting you with my typos. I appreciate your correctnes, I guess I meant PAP and to put it into the right section, thanks for your correctness!- JUST GOT A ZASTAVA PMP... TEH HOTNEZZ!!!
if anyone knows a decent place to get some magazines/ammo/furniture please let me know, I would be much appreciate and obliged. Thanks for your time and help!- JUST GOT A ZASTAVA PMP... TEH HOTNEZZ!!!
I am absolutely enthralled with my new rifle, a Serbian? Zastava PMP 7.62x39mm! Anyone have any tips/info/etc? Thanks! Oh and I put on a brand new NcStar red dot + laser scope that I got bore-sighted at the shop...I am thinking that maybe I chose the wrong scope and I need an illuminated reticle , high(er) power scope like a 3-9x40/42/etc.. Any recos? I don't need Leupold or Unertl, I am not Bob Lee Swagger or Master Guns Tom Becket... but I would like somethin nice...Thanks! - How do I sell a gun to someone?