Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

NJdiverTony

Members
  • Joined

  • Last visited

Everything posted by NJdiverTony

  1. Yes, the dot does get magnified... but so does the object you're aiming at... so the size of the dot doesn't reduce your accuracy or have a negative effect in any way. Why is 3x "pushing it"??? I don't get that statement. I used a 3x magnifier and it works great... @ 100 yrds, the target is actually visible and you can get very accurate shots on the bullseye (I get sub 2" groups)... without the magnifier the 2 MOA dot almost completely covers an 8" target @ 100 yrds and I get 6" to 8" groups.
  2. While I agree with the Governor on saying that some of these opportunistic politicians need to STFU... He also said: "I believe that each state should have the right to make firearms laws as they see fit," Christie said during the campaign. "I don't believe it's right for the federal government to get into the middle of this and decide firearms laws for the people of the state of New Jersey." So in effect he's saying that each state should have the right to ignore the US Constitution and tell you what you can and cannot do, regarding firearms. I don't agree with that!
  3. If you get fingerprinted for your initial FID, I don't understand why you have to go through the whole process all over again. If the NJSP doesn't require re-printing... then neither should a municipal PD. Isn't the NJ FID a state document anyway? Why does each PD make up their own rules when they should be acting as an agent of the STATE in managing FID apps, change of addresses, PPP's etc... ? This state is so F'd up.
  4. Pizza Bob... Good job with your letter! Very well written!
  5. When I moved from Monmouth County to Hunterdon County a few years ago, I had to get my FID changed for the new address... Since my town in Hunterdon is so small, and we don't have a PD, we have to go through the NJSP. They let me keep my old FID while waiting for the new one (which took almost 6 months, ughhh!) in case I needed to buy ammo... and they didn't make me go through the whole process to get new prints and all that. The trooper at the barracks said that I had already gone through that when they issued my original FID, and my prints were on file already and didn't have to do it again. They just processed the address change and gave me the new card.
  6. Welcome to the forum! I live in Lebanon as well... Good to see someone local on here.
  7. No, not at all... because you can rotate them so they flip up and out of the way... or just remove them totally if you want. I have them set so they flip up and that works great for me.
  8. Which one is out of stock? The Micro-dot model? The PAM3M multi reticle shows in stock on PA's website, and I highly recommend it. https://www.primaryarms.com/Primary_Arms_MultiReticle_Red_Dot_Sight_PAM3M_p/pam3m.htm
  9. Pretty cool I guess, but not my cup of tea... Too gawdy for my taste.
  10. Actually on a recurve, you're gaining about 2.5 to 3 lbs of draw weight per inch of draw length past 28". On my takedown recurve, which has 45lb limbs, I'm actually drawing about 51 lbs since I have a 30" draw length. All recurve bows are rated for for their specified draw weight at a 28" draw length.
  11. Never had that happen with mine either...
  12. The Vortex is nice.. but I'd say that the Primary Arms red dot is pretty much the same quality (build-wise)... so go for the one that costs less (Primary Arms) and has more features. The Primary Arms gives you multiple reticles, as well as a 2 MOA dot. The Vortex has a 4 MOA dot. WINNER = Primary Arms! I have the Primary Arms multi-reticle sight with the cantilever mount (which gives me lower 1/3rd co-witness) and also the Primary Arms 3X Magnifier on a quick disconnect mount and works wonderfully well for me. Lots of rounds down range and it hasn't lost zero yet. I also love that the dot looks like a perfectly round dot and not a red blob, like so many other red dot sights do.
  13. I have one with the large latch and love it. I have big hands and it's very comfortabe for me and it's very well made.
  14. I hear ya... I was thinking the same thing recently when I bought my Mk III Hunter... All the comments I saw online about how hard they are to field strip and put back together had me worried at first. But it's not bad at all... It's just a matter of following the steps, like you said. Once you can follow the right steps, it's a piece of cake. And I agree... it's an AWESOME gun and crazy accurate!
  15. I agree with you guys on Parker crossbows... Very well made and their lifetime warranty is one of the best in the biz. I've shot a couple of their models and they were both really nice.Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
  16. Took your advice on this and figured I'd try it out, since it's a pretty cheap solution. I took my AR over to SCFGPA last night to test it out and it worked just awesome! I shot about 60 rounds of Lake City XM193 without a single problem, and the trigger pull is greatly improved. No light primer strikes and every single round went BANG. Another plus was that my grouping size was cut almost in half @ 100 yrds, since the trigger is so much better now! Best $10 I've spent on my AR yet!
  17. The whole accurizing kit is $115 whereas the Target Sear kit is $28 plus the $2.00 for your spring. Just the target Sear replacement alone will make a fantastic improvement in your trigger pull... I highly recommend it.
  18. By the way... you don't HAVE to do the whole Volquartsen trigger kit (aka Volquartsen Accurizing Kit) if you don't want... You can just replace your stock sear with a Volquartsen sear and you'll still have some awesome results in the trigger pull of your Mark III. It's also much cheaper to do only the sear.
  19. You can do it on your own... I did my own and it wasn't that difficult. If you're comfortable with taking things apart, tinkering and putting them back together, then you shouldn't have any issues. Just go slowly and pay attention to where each part goes and reference schematics and any videos on youtube or online that can help guide you. The upgrade is really worth it.
  20. +1 I agree... I did some Volquartsen upgrades on the Mark III Hunter I recently bought and the difference in the trigger and how the gun shoots is nothing short of amazing.
  21. Wow! But something about it screams fake... It's very unusual for a shark (especially one of that size) to be in an inlet, like that. They usually stick to open water. But.. if it's real... WOW!
  22. +1 That's what I was basically trying to say...
  23. It's a free country and you can do as you wish in your home... and I respect that. I'm only referring to full time carry inside the home and staging guns all around the house. I support CCW outside the home, as I believe that your chances of being a victim of crime outside the home go way up.
  24. I remember you telling me about this a couple of months ago... What an awesome deal you got! Thanks for the suggestion... I can definitely try that out.
  25. And that's what is beautiful about our country... You have the right to do that, and I fully respect that right! Now, as you are an FFL and have lots of firearms in your place of business and/or home, I definitely can see the reason to want to be prepared for the worst... Your chances of being targeted by thieves or criminals is probably much higher than your average person.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.