Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T Bill

Members
  • Joined

  • Last visited

Everything posted by T Bill

  1. If you have a tight budget, used Ruger Security-Six, GP100, etc. If a little more funds available anything in the S&W line. I have seen used Rugers in gun cases that were definitely diamonds in the ruff for cheap. A little TLC and you have one tough wheelie.
  2. No, bill is specific. Semi-Automatic is the qualifier.
  3. I cold blue after milling the whole piece off on the Bridgeport. Several coats darkens it nicely. I have seen permanent black marker used as well
  4. McHose and Space in my district not only voted against it, they got up on the floor to speak against it. I know Oroho is on board in the senate. I'm with ya brother, lets blow this popsicle stand.
  5. Welcome. Be nice to Jim! Jim who you say? Jim Flynn's Truck Repair Center just up Rt31 from Hot Rods. M-F 9-5. Keep plenty of cash in your pocket as Jim don't take plastic. Don't worry he'll get it for ya. One of the few good guys left in NJ
  6. First of all, all firearms go through any LGS. That's law. Now the question becomes which LGS can do it better than the next guy, or better still, do they want to. Most NJ LGS have been backed into a corner by our restrictive laws. This causes a higher than usual overhead because they can only sell what the state lets them. Adding to the price pressure is higher brick and mortar costs such as utilities, taxes, et al. Now add a smaller than average customer base that needs to be "pre-qualified" and the retailer is forced to charge more per item because he has less traffic than he should and needs sales to stay in business. No doubt a tough business to be in, in NJ. Ever wonder why there are more handguns for sale in NJ LGS than long guns? And when you find a great selection of handguns in NJ LGS ever notice that they all seem to be towards the high end of the market? Why? Because getting a permit for a handgun is such a PIA that when you go get one your getting the best, so the only thing there are the best. Most NJ LGS close on Sunday, why? NO NICS. Why be open when I can't sell a big ticket item. Now he only has 6 weekdays to make his quota. I'm not going bash them on their pricing, it is their business to do with as they please. I will shop where I am welcomed and treated fairly. I have been in many NJ LGS over the years and for the most part have been treated poorly. I don't know why they have the attitude they do, or care to discuss it. It is what it is. Today I have 3 NJ LGS that I use and they have a "can do" attitude and welcome my business for whatever it is. It is refreshing doing business with them. If the price is right, I buy. If not, and I elect to do a transfer instead, no problem. They welcome the business they get. So for me that is how a see it. Buy it or move on. Of course PA is only 10 minutes away and those NJ LGS know that too!
  7. Yes I do have bolts with upscale coatings. I believed they had some merit (easier to clean, runs smoother). Drank the "Kool-Aid" so to speak. When I switched to Fire Clean lube most of the reasons I switched for went away. Do they look nice, yes. Are they necessary, probably not. Your choice. All depends on how much you want to put into your build. I have used Young, PSA, Colt, RRA, WMD, and not had any reason to date to pick one over the other. A good quality bolt carrier will more than likely be ok with the bolt supplied by Walther, that's all. PSA FA carrier, cam bolt, firing pin, and cotter pin, $85. Match it up and your GTG. Today I would probably save the money for parts that would really improve the build, charging handle, handguard, glass, trigger first.
  8. I see you have chosen a bolt carrier with an upscale coating. Any particular reason? Do fitted Walther bolts come with a similar coating? I would think the first choice would be a full auto or ar-15 type carrier with a fully shrouded firing pin area, then the coating if you wish. Some like the coatings, some do not see any reason for them. I have chromed, Nibx, and phosphate. I have switched to FireClean for lubrication and find that none of the special coatings see to make a difference. All seem to wipe clean very easily. I would choose a full auto carrier first, and the coatings you like. My latest build was a repurposed Colt phosphate BCG, saw no reason to go otherwise
  9. Depends on the manufacturer and market demand. I know Rugers as an example have a larger than usual industry margin. Try "Gun Genie" and before you buy call the retailer and see what the price would be. I have heard on occasions where the retailer quoted a better price than the "genie".
  10. SPR 18" barrels are being marketed with mid, intermediate and rifle length gas systems. Which would you choose and why? After a lot of research and reading a lot of posted information the debate continues including the biggest names in the industry. I went with an intermediate system as I tend to shoot reloads that are quite mild either for practice/plinking or given the short distances involved on a course of fire. Stretching the life of the brass. Or shooting retails that tend to be a little "weaker" such as PMC, etc. Some blog comments have been quite harsh on the med-length system with regard to excessive wear on brass, extractors, and bolt faces. Rifle length reliability has also been discussed. What is the best solution? What do you think!
  11. Damn near .30/round. What a country, never going back to the homeland. Let freedom ring! Capitalism at its best.
  12. Recessed Filter will start a new post when the time comes. Figure early April.
  13. T Bill replied to EWC88's topic in Rifles
    Almost all long range shooters in the 600-1000 yard range use 308. It seems to be the best all around caliber. The others 6mmBR, 300 WM, etc have other factors to weigh. Most use bolt action. Considering any competition may steer you to other things you must to into account. Nobody goes to the range with more "stuff" than a high power shooter. Put an expensive spotting scope on that list, and a possible shooting jacket.
  14. Just installed this same barrel purchased from Ty for a 3G type build. I must say the quality is top notch. Installation was a breeze. Put a Troy Claymore Brake on because I did not want to have to deal with "side blast". I hope to make it to the range in the next two weeks. Snow cover is just about gone.
  15. Ticking upwards for several reasons. Panic buying, hoarding lead the list. But your dollar is worth less around the world so that adds to it also. Most of the current uptick is due to panic buying, internet hype. There are plenty of foreign arsenals producing. Importers choose based on demand and price. Now an unexpected world "problem", along with internet hype starts an increase in demand. Free market says price goes up. It will take several months because of import regulations and shipping, but you will see more later this year.
  16. Remember it is a "lecture series", not a forum for discussion. A preach to the choir sort of event. They do not want an exchange of ideas or information. THEY ARE PREACHING their solutions to the "problem"
  17. It looks like we are approaching the bottom of the barrel with pistol powder availability. Ball powders are easier to work with when using powder measures. Most of what I see on your list is very hard to find. I have not seen any AA powders locally for a long time. VV dried up too. Winnie powders 231, WSF no go. WST real lean. Auto Comp was around have not seen it lately. Alliant is mostly a flake powder. The colored Dot powders are sparse. Your best bet right now might be a IMR or Hodgdon powder. There are some that are still around. 700X, 800X, IMR-4756, IMR-7625, Longshot, Silhouette, HS-6, PB, Trail Boss, Titewad. Granted these are not the prime choices you would want, they are the only choices right now for 45s. Hopefully things will get better, time will tell. Good Luck, it is a real tough time right now to be getting into reloading. Primers and heads are looking better all the time.
  18. One's sticky and the other's wet.
  19. Right now I would make a list of alternates and take what you can. I have not seen any Tac, Varget, W748. Any substitutes I have found where only in 1 pound sizes. I have not seen 4 and 8 pounders, either. Good Hunting.
  20. Explain to me why then 77% of all diagnosed cases of rabies in the state of NJ are raccoon. Skunks 14% Cats 4% Fox 2% Groundhog 2% All others 1% This per the NJ DOH.
  21. I would pick up a book or two. Even if you get an old version. The information is invaluable.
  22. There are only two types of raccoon in NJ, those with rabies and those about to get rabies. Don't mess with them. Nasty things happen. Trust me, you do not want to have to get the shots. And if your pet is exposed vaccinated or not, you will be treated.
  23. Here ya go. What to know about Geissele Triggers GeissleTriggerSummarySheets.pdf
  24. A solution would be to borrow a Have-a heart trap, bait it with wet cat food and wait overnight. Then call the town to dispatch it.
  25. Greater Philadelphia Expo Center 100 Station Av Oaks PA F,Sa,Su 3/28-30/2014 www.phillyexpocenter.com

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.