Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T Bill

Members
  • Joined

  • Last visited

Everything posted by T Bill

  1. See the auction ends today on a lot of them. Nice eye candy. They will be relisted again, I'm sure and prices will drop. However, some are showin a high bid. Why didn't I buy that Colt wheelie back in the 80's when I had a chance? Got the Ruger Security Six instead. Thanks for the post.
  2. Free brick? at Dick's? NFW. First they have to have them. Second, why give them away when all the US is screaming for them. I suspect they are a little heavy in inventory and want to move them to get them off the books. I would not be surprised if Ruger has been pressured a little on the price.
  3. Every manufacturer has his own terminology to describe their product. Berry's is no different. Most pistol loads can be described as follows HP - Hollow Point or with plated bullets, heavy plate. have to look at bullet. FP - Flat Point SP - Soft Point - the core is exposed at the tip of the bullet. HB - Hollow Base - bullet is longer because center has no core at base RN - Round Nose TP - thick plate same as HP heavy plate. SWC - semi wad cutter - good for target shooting, cuts round holes in paper. DEWC - double ended wad cutter - mostly for revolvers, 38 esp. again paper target shooting like bullseye TMJ - Total metal jacket - the entire bullet is covered by a metal jacket FMJ - Full metal jacket - bearing surfaces are covered by a metal jacket - base is not you can see the core CB - concave base - bottom of bullet is arched inward. BB - beveled base - bullet has a slight bevel at the base easier to load helps with ballistics L - lead or HC hard cast - Lead bullets can have different "hardness" ratings. J - jacketed Things like XTP, HAP, GDHP, are specific to a manufacturers product. Just a few to get you going............... Be aware of bullet sizing too. Lead and plate are usually .001 larger in diameter than bullets with a metal jacket. Lead has a lower top end speed to limit bore leading (around 1100-1200 FPS) and plated can safely be pushed up to 1200 - 1500 FPS on average. You need to check with each manufacturer for particulars. Hope this helps.
  4. Powder for 230RN 45 ACP? Anything you can find right now. Haven't seen W231 for months. If I were you I would make a list of possibilities and see what I could find. Hopefully a ball powder as it is easier to work with. Check Steve's reloading pages, note the powders and see what you can get. http://stevespages.com/page8a.htm
  5. STR, very comfortable good check weld.
  6. Dunkleburgers has a new store on 209 just west of Broadheadsville. Commonly known as West End.
  7. Yes only M,T,W, and he's even low. Just down the street from the in-law's place I'm there fairly often. Powder's tough all over. Dunkelbergers in STBG and West End have some in stock but will take a little more coin.
  8. It's simple. Get the Garand. They ain't making any more of them. Had several SKS at one time, when they were cheap. Got rid of all of them. Nothing but nothing in the cheap foreign gun family can match the "ping" of the Garand. Garand fanboys know what I'm talking about. They'll be worth a lot more in the future too!
  9. Given that this is your first build and possibly your first AR, think about what you are looking to do with it. Home defense, run and gun, long range shooting, etc. These specs will determine your choices on parts. I love how the AR platform can be tailored to suit the type of shooting you intent to do. If you need help deciding, ask. Hardest part is sifting through the answers to find what works for you. And it can always be upgraded later. I may have enough in the spare parts bin to build a real frankengun.
  10. Given your budget www.joeboboutfitters.com JP LPK w/o LTG $39.95 JP Reduced power spring kit $11.50 (yellow colored springs) ALG - QMS Trigger Group $44.95 Total about - $96.48 plus shipping.
  11. It's a J Stevens Model "14 1/2" made between 1911 and 1941. Has no serial number (don't know what PRNJ does with that). I would get a ruler and recheck that barrel, was made with a 18" round barrel. Was the follow up to the Model "14" made from 1906 to 1910. Difference being the "14 1/2" was a takedown model. Has a rolling block type action. Value is anywhere from $150 and up. I have seen some in excellent condition asking as high as $600.
  12. Best prices on powder and primers are either bulk mail to cover HazMat fees, or a PA gun show / store road trip. If in NENJ, Davis in Sloatsburg, NY?. Powder and primers not a big item in NNJ. What county are you in?
  13. Case Feeder Plate for large pistol (does not come with ammo plant). Inertia bullet puller (to correct mistakes). Case tray, primer tray, powder funnel, Hornady 9th is good. Look up complete kits and compare to what you have on order. A lot of quiet time. Go slow, understand what you are doing. If you don't, ask questions, seek answers, DO NOT assume anything. See you are in North Jersey, there are a bunch of us up here that have LNL AP's and I am sure are willing to help, reach out, we're here. Shongum Sportsmen's will have their annual reloading clinic on May 31 at their Mansfield, NJ range. Worth attending. Check website calendar for more information.
  14. Sounds like the panic buying has already begun. Wolf will be as expensive as US made ammo soon. Just absolutely out of control. We have allowed them to hype us into another feeding frenzy. Almost as bad as when they say SNOW around here. "OMG, I got to get the bread and milk." Can't imagine what will happen in a real SHTF situation.
  15. Time for a good O/U! Road trip to Griffin and Howe!
  16. It all seems to go through cycles. First, no bullets to be found. Now a little better but still tight. Then primers. Same deal. Now powder. Brass seems to be riding large waves. In supply then scarce. Used to see lots of range brass available especially from law enforcement. Not seeing that now. Guess they're recycling too! It would make one believe that reloading supplies are now suffering from the same frenzy that started with guns when Obama got elected. Moved onto ammo, and now reloading. OBAMA gun salesman of the decade 2008-2016. Who's next, Hillary?
  17. Why not just buy the action. Sold at Midway, Brownells, and I'm sure other places as well. I can see the reasons why purchasing a complete rifle maybe cheaper than just the action. The cost of twisting off the barrel and clocking a new one on could be a little expensive considering a new barrel, etc.
  18. Ditto this^^^^^^^^^^^^^.
  19. Buffers can be checked with a scale. Carbine - 2.9 oz H1 - 3.8 oz H2 - 4.6 oz H3 - 5.6 oz Check your spring also. Mil specs are: Carbine 10 1/16" min to 11 1/4" max Rifle 11 3/4" min to 13 1/2" max Careful, if that M&P lower was a ban state factory build with a factory pinned stock, it may have a rifle buffer in it. Pinned factory stocks for banned states may look like a carbine stock, but the buffer system is rifle. Not sure what S&W is using/doing. There are some that a putting a hybrid tube on the rifle, a rifle length tube with a carbine pinned stock, internally blocked to carbine length. I suspect that is what you. Check pictures for carbine and rifle buffers before you go changing them. Check your spring. You may have the wrong length. Check your brass for extractor marks. Check your extractor on the bolt.
  20. If you will travel to Florida, then a FL non-resident is required. It is general known that UT and FL together is the gold standard for NJ residents.
  21. Heavyopp has it right. No need for factory ammo to start. Last new caliber (300BLK) the rounds were made from 223/556 brass with bad shoulders or case mouths that were crushed. Trimmed, run through the resizing die, trimmed again for length and loaded. Works great. Had primers, powder, and heads for other same calibers, cost to make 300BLK rounds, less than .35/ea.
  22. Cabela's backorder until 3/25 on the Winnie turned into a shipping notice today, due Tuesday 3/7.
  23. Wheeler 156-444 upper vice block clamp on Amazon $25.
  24. Go to EFGA when NASCAR race is in progress, range is always empty.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.