Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T Bill

Members
  • Joined

  • Last visited

Everything posted by T Bill

  1. Pistol powder is scarce. 115-124 heads look for the following bullseye, universal, 231, aa#2, auto-comp, n-350,power pistol, 3n37,imr sr-4756, AA#7, unique, herco, hs-6, blue dot, 700x 800x pb, sr-7625. There are still more but something to go on. You may find 700x or 800x as these are not popular in 9mm. Ok to use, just not popular. Good Luck.
  2. Call them. Can't see why the stand is two weeks old and harness is 2 or more years old. I have not replaced harness for years. Examine and test it at the beginning of season near ground level and store in cool dry place. Never had a problem. Before that, used to make rope harness (BSA days) and used that for years, replacing only when rope showed signs of excessive wear.
  3. Forged. Aero does not make poly AFAIK.
  4. With the snows we have been having, and given the POS they sell today for a snow shovel, yea I can believe you would need a replacement by now. That's why I go to yard sales and pick up old hand tools for a song. Quality from a bygone era.
  5. From the predicted 12-18+ to nothing is a blessing here in NW Warren County. However, the declared SOE was not a bad idea IMHO. At the time a decision needed to be made and given the information available not a bad decision. Yes we knew it was changing moving south but how much and how far was still up for grabs. Add in possible icing conditions which are the worst and you could have a real mess with little or no salt available. Been a bad winter overall, since 1996. I for one am enjoying the "miss" and hope we have seen the last of this. I'd be happy with "normal" March weather right now.
  6. H110 and W296 are two great powders for kick a$$ handloads in 357mag. 1500-1650 fps for 158ers and 1300-1400fps for 180s. Of course lead loads need to be held to 1100fps if not gas checked because of leading. Hornady has a 140gr flex tip head but the case has to be trimmed to 1.240" for proper loading and powder data is limited. Given the powder market, I have seen W296 around. H110 is drying up. Doubt if you find any Viht N-110, or Aliant 2400 but these are options too! Hornady 125XTP is another option, will get you up to 2000fps but I still have not found any around. Caution and testing must be used if crossing from the rifle to handgun with these loads. For reference only YMMV. Hornady 158 XTP, COL 1.590, H110 8.6 (1200) to 15.5 (1650), W296 10.2 (1200) to 15.7 (1650). Hornady 180 XTP, COL 1.590, H110 7.9 (1000) to 12.9 (1400), W296 8.6 (1000) to 13.5 (1400). Rossi M92 16".
  7. West end store has a bigger display.
  8. Recover Tactical is offering a grip and rail system for 1911. Great way to add a light or laser to a 1911. Also adds a square front to the trigger guard. Three colors offered. Black, tan, Olive drab. http://www.recovertactical.com/
  9. My single stage in not mounted on the bench. Pull it out of the drawer when I need to do something in small batches or something quick. Attach it anywhere with a large "C" clamp and have at it. Use it for forming 300BLK brass, depriming, or anything else, even large rifle reloads. When the weather is nice, clamp it to an old picnic table in the yard we use as a workbench or such. Can sit outside and process brass, better than trapped inside at the bench. Have even taken it to the range and used it there to work up loads on the spot.
  10. Go to the chiro or podiatrist. Get impressions made for a set of insoles. Not cheap but does wonders. I developed foot problems from poor fitted shoes. Only thing saving my feet now.
  11. Got a B/O notice on the WInnie M22, due into Cabelas 3/25/14.
  12. As the title states, PSA is having sale on reloading items. A Hornady LNL press is now $345.
  13. Sorry, corrected. See above.
  14. Corrected. Here they are. http://njgunforums.com/forum/index.php/topic/9350-njgf-targets-are-here/?hl=%2Bnjgf+%2Btargets+%2Bare+%2Bhere%26%2333%3B
  15. Been dealing with them off and on for over twenty-five years. Never a bad experience. Always like CS and their products.
  16. Out of state long gun purchase must meet requirements of both states, Federal law I believe.
  17. Each and every caliber has a max pressure rating regardless of powder used. Now each powder's pressure curve is achieved differently. Burning rate has a lot to do with it. Fast burning powder will have a sharper curve than slow burning powder. Sharper curves means higher pressure faster and for shorter period. Light bullets respond well to this. Heavies do not. Slow burning powder achieves the peak pressure over a longer period of time. Pushes heavy bullets better. Now, where a powder lies on the burn rate chart is strictly by its individual burn rate. There is no relevance to position other than burn rate. A powder at position ten does not burn in half the time than a powder in position twenty. It is a fine balance between bullet weight and gases pushing the bullet into the forcing cone and down the barrel while staying with the max pressure rating for that caliber. Recoil is a perceived thing. Certain powders have a "snappy" feel while others feel like a big thump. Slow powders do not shoot softer because they burn slower. It is again a balance between powder burn rate, bullet weight, and the way the firearm is setup to handle that impulse.
  18. Calcium chloride snakes are used to melt channels that the water uses to get out. Best solution for ice dams I have seen was in New England where they use steam to melt them off of roof. I do not know anybody around here in NNJ that does this. Just don't go wacking away at that ice on the roof. Does more damage to roof that you can believe. You'll be replacing it sooner than you think. Biggest problem is lack of proper ventilation in attic to keep roof cold enough that snow melts like it is supposed to. Tough to do at times. I have two bow windows that leak like crazy in this weather. Time to get rid of them. Just a bad season for snow. There is 16-24 inches on it right now. It's got to go!
  19. Use salt snakes. Pantyhose legs filled with salt put on roof over (perpendicular to) ice dam. Gives water a place to go. Salt kind of tough on gutters, but better than alternative. Magnesium chloride is better but real expensive.
  20. Hold onto the Clays, it's like liquid gold right now! Auto Comp can be a little difficult to work with, needs near upper limits to work well. Heard that it is used as OEM powder but never found out what loads it's used in. Clays can be pressure sensitive, not much between high and low charge weights and charges are very low. BE VERY CAREFUL. Both are very clean and work well in powder measures as they are a ball shaped powder. Good Luck working up a load and again BE CAREFUL.
  21. If the powder does not have an acidic odor when you open the container, probably good to go! I'm still using powders bought in 1990. Primers will last forever if kept cool and dry. Rock Chucker, can't kill it. Great single stage press. Dies kept cool and dry will be fine. No surface rust. But, can be cleaned and used. Progressive shotshell reloader would depend on make and model and whether parts are available or not. Could be very useable but at the moment lead prices makes shotshell reloading impractible unless a special load is desired. No reason I could see why it would not be a good acquisition providing it's in good shape. Price? Depends on a precise inventory.
  22. It's in the regular BATFE book anyway. When NJSP finds there is no NJ assault weapons book kepted, how long do you figure it will take to go through the BATFE book outs? Maybe a day?
  23. Also to consider, how are you going to clean your brass before reloading. Simple tumbler would be one solution.
  24. Single stage press will need dies and shell holder for each caliber you want to load. Will it do the job? Yes, but for pistol reloading will be very tedious and tiresome. This can be a good way to start out before you decide if you like reloading or not. Won't go to waste when you decide you need that progressive press. Others seem to be happy with a turret type press, never used one so can't tell you. I have a RCBS single stage that I keep for special projects where not to many rounds are loaded, or I need something fast as setup is very easy, but for long runs of pistol brass a progressive becomes a must. Midsouth Shooters Supply has a big reloading sections as do other online retailers. As for reloading supplies, heads can be ordered online with no problem, powder and primers are cumbersome with the hazmat fees. Best to plan a road trip to a PA gun show, or I believe Solomon's is in you neck of the woods. Other closer to you can fill in the details. Powder right now is almost as dry as 22LR. Hopefully will improve with time.
  25. Used to shoot USPSA back in the 90's. Been thinking about it again but something always gets in the way. There are stickies on this board to give you backround.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.