Everything posted by T Bill
-
In the market for a Durable 22 lr semi-auto pistol
Find a used Ruger MKII with a bull barrel. Order the Volquartzen Trigger Kit, Houge wraparound grips, and your GTG. This model Ruger is a tank. Almost all used ones are no where near used to their capabilities. Most were closet queen first purchase guns that were set aside when the second gun (9MM) was purchased.
-
Powder availability in NJ
Scatterbrains: If you go to EFGA to shoot, then T&T reloading is not far way, about 10 minutes in stockertown, pa. He's there on Saturdays, if he is not at any gunshows. Check his website for where he is at. www.tntreloading.com
-
Proper Journalism? Making you a burglar's target!
I find it unbelieveable that a newspaper would feel justified in publishing permit holder's information. They are out to turn you against your neighbors. What I have is none of the their business. Not to mention a criminal's guide to what you have! http://www.lohud.com...?nclick_check=1
-
How much to pin a stock?
Do it yourself. Take a cordless drill with a 3/32 bit, a 3/32 by 3/4 inch long roll pin, drift punch to tap in pin and a small hammer. Position stock where you want it, drill hole trough stock and extension so hole is in the lower sqaure area of extension. Install roll pin. Stock now pinned and your done! See "How to Pin a M4 collapsible stock" on youtube.
-
Smith 41 for Steel Challenge
When shooting in cold weather consider removing all oil residue from the firearm and then use a dry silicone type lube. Clean and re-oil after using. Works wonders esp with 22lr. If you feel you must use oil, then Rem Oil
-
Not gun related- need to hear reviews on dealerships- Brad Benson Hyundai or Freehold Hyundai
I have a 2007 Sonata with 70,000 miles on it. It has been a good car. Only complaints have been with rear brakes. Seems to go through them quite fast, can't seem to figure that one out. It has the 4 cylinder engine and have gotten as high as 40 mpg on long trips to Illinois and back. When we decided to purchase this car, I researched all I could and decided what options and all. I then used the internet to have dealerships quote prices on the car. I even used internet buying services. Ended up using one of the internet bid dealers to purchase the car. When quite smooth. As far as warranty work, I use the local dealer. At first he bitched about it, but after a sane discussion with management, things smoothed out fast. Most issued had to do with recalls. I have only two minor issues with the car. Pretty well made. Hyundai seem to stand by their product. I have three hyundais and my BIL has two, another BIL had one. Between us no major issues during ownership (engine, trans, A/C, etc). Over 450,000 combined miles on 6 cars, one still running with just about 150,000 miles, still getting 36MPG back and forth to work. Good Luck
-
Second Amendment What does it mean?
Moved to political, thanks.
-
Threaded barrels?
Have it shipped directly to a FFL dealer you have made arrangements with that will attach the brake/comp and then pin it for you. This is one approved method. Two forum sponsors, Mastodon (Highland Lakes, NJ) and Arms-N-Ammo (waterford works, NJ) are capable of performing this service. Adco Firearms in Ohio can pin it for you also and then ship it direct to you. Look under shop services.
-
Pretty cool meteor shower going on right now.
The apocalypse has begun! Zombie Squad Alert ----- DEFCON4
- Glock
-
Match grade Bushmaster
Not up on the Bushmaster configurations. DCM / CMP rules are very strict on service grade rifles. Best to check carefully if National Match is your choice. I have a Colt MT6700 set up as a service rifle for DCM Competition. Match Rules (on the CMP website) state only certain mods are allowed in each category. Google "The Bushmaster DCM Competition Rifle". Results will display a PDF from Bushmaster that has all the DCM options and configurations available for their DCM Rifle.
-
Oaks Gun Show 12/14-12/16
If it was that low we'd all buy it. Try .35 to .40 right now. Seems to be breaking the $400.00/1000 barrier very soon.
-
Match grade Bushmaster
Sounds like it was setup as a National Match Rifle. Weights are common for the National Match course of fire. Done to balance the rifle and steady it. Production levels required an additional machine to increase production rate of lowers. The orginial machine produced the L series, and the newer machine makes the BFI series. Both are of equal quality, no difference exist between them beyond the serial number
-
870 Furniture
Boyd's Gunstocks has walnut and laminate forends and buttstocks.
-
Ar 15
I think a little more information is required on your part. What is your primary purpose for the upper? Target Shooting, Run and Gun game, SHTF/Home Security, etc! From there we can help you layout the type of upper you would be happy with. Then we worry about NJ neutering it. (No bayonet lug, Compensator pinned or no compensator).
-
PMC 223 Cabelas
Order it. Two 300 round units with 2WINTER coupon code ships free ($200). Due to Cabelas around 12/25/2012. If you find something cheaper, buy it and cancel your backorder. Otherwise, will ship when it comes in free. Cabelas does not charge credit card until it ships. Not to bad given all the crazy prices going around.
-
Bull Barrel Help
JSE Surplus has a few Wilson Arms 22" 1X8 SS 223 wylde bull barrels listed. Allows you to shoot anything in the 223/556 platform. http://www.jsesurplus.com/WilsonArms22.223Wylde1x8StainlessSteelBullBarrelStripped.aspx
-
Thinking about a Glock. Who never owned one?
Started many years ago as a wheel gunner. You could not get me to put it down for anything. Along came USPSA and next thing you know I was a 1911 Fanboy. Loved it, still do. Son came home with a Glock, I said yea, yea no big deal. Then I shot it. Very Very nice. He had invested in several top notch aftermarket changes that changed its feel tremendously. I have to say my next purchase will be either a Glock 22 or 23 (40 caliber), with an after market 9MM barrel and a Advantage Arms 22LR Conversion Kit. I reload, so cheap 9MM, 40MM and 22LRs, all on the same platform, my kind of gun. I did the same with the 1911, 9MM, 45ACP and 22LR for the same reasons, but required different frames because they are not interchangable. The aftermarket Glock parts allow you to customize it just to way you like it. Trigger is different, but easy to get used to. I will never give up my 1911's or wheel guns, but the Glock is certainly on my wish list.
-
Why I despise the USPS!
Priority Mail from Farmingdale, NY go figure. Email says sent 11/28/2012. If it was UPS I would of had it yesterday. Confirm Shipment Status Shipment Information Confirmation Number: Shipped on: November 28, 2012 Shipped via: USPS Priority Mail Confirmation Scan History Date Time Location Status November 30, 2012 11:45:00 KEARNY, NJ 07032 PROCESSED THROUGH USPS SORT FACILITY November 30, 2012 04:15:00 BETHPAGE, NY 11714 DEPART USPS SORT FACILITY November 29, 2012 21:54:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:19:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:17:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:16:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:14:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:13:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:11:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:10:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 29, 2012 20:09:00 BETHPAGE, NY 11714 PROCESSED THROUGH USPS SORT FACILITY November 28, 2012 11:55:00 11735 Electronic Notification
-
Looking for a good 'starter' muzzle loader...
I bought a T/C Impact for my son last year for $220.00. Very nice unit. Has a 4X32 scope on it. Accurate as hell at 100 yards. Groups 1.5" or less with 250 gr JHP 45 Cal sabots.
-
Question about AR Build
Lunker's right on with this one. Get a palmetto state armory classic lower build Kit ($110.00) and do the build at home. Hell, both do it together and you'll both have a better appreciation on how the AR works. PSA Kit includes telescoping stock (NJ NO-NO). Get a 3/4" X 3/32" roll pin and a 3/32" drill bit. When you get the parts drill and pin your stock thru the lower square part of the tube. Now you legal too!! Plenty of info available. AR15.com has blueprint of lower parts you can print out and layout parts to match so you can get the right parts in the right places and right way. This is easy. And the NJGF members are here to help!
-
obamas proposed banned list
For pretty much the same reason the M16 was banned by name. The ability to mount a bayonet, large capacity mags (15 rounds were standard issue in WWII, but M2 and M3 variants used 30 rd mags), and the ease to convert back to full automatic fire ( like M16, however under BATF rules for this at the time).
-
Pequest hunters ed field day course
Will take walk-ons only if registered are no shows. Up to the course director.
-
NJGF Car Thread
Here's my weekend trail toy.................... 1998 M109A4 6X6 Shop Van with a M105A2 Trailer. Turbo Charged Caterpillar 3116 Diesel Engine 170 Horsepower. Allison Automatic Transmission and two speed transfer case. Truck GVW 16000 lbs. Trailer GVW 5250lbs. Super Single Wheels and 14R/20 Tires w/CTIS (Central Tire Inflation System)
- Cleaning and maintenance of Dies