Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. I don't understand why people complain about this at all. It works just like a glock does, IF YOU WANT TO. Check that the gun is empty, press the trigger, move slide back, pivot takedown pin. The striker release thingy is entirely optional.
  2. Sometimes the fit is a real pain depending on the tolerances on the two parts. I've had one set that insanely tight. Just order a couple of roll pins made by different people and one may fit easier, they are only a couple of bucks. Or hit it harder.
  3. He really doesn't say that. He actually says he encourages people to fight back. I have no idea why people get angry at what he may or may not have said in some context, keep in mind that the daily mail is a tabloid. It is very possible that what he is saying is that the two sons were just in the mood to beat up someone but when the marine punched back they felt disrespected and escalated. Those could just be facts not opinion.
  4. Vlad G replied to 1563621's topic in Handguns
    Ok, lets start from the beginning. Do you shoot with the thumb on the safety? If yes then how is it moving up, is it pushing your thumb up? I have a hard time figuring out how exactly that could happen. When you flick the safety on and off is there a distinct click and resistance from the detent spring? Because limp wristing allows the gun to move backwards while more vertical then it should be thus transferring inertia to the safety. In fact how the heck else would the safety move anyway? There are only two ways I can think of for the safety to move. Either you are bumping it up (and not riding the safety with your thumb as you should) or you are limp wristing and what should be a mostly front to rear recoil impulse becomes at least partially a bottom towards the top impulse transfer which flicks the safety.
  5. Vlad G replied to 1563621's topic in Handguns
    So I'll ask again, how experienced are you with the 1911 platform? You are shooting a fairly heavy recoiling, short barrel .45. That has a lot of inertia and depending on your grip and how much you are controlling the recoil you might end up with some of the energy and impulse moving the safety, The reason I assume you are not that familiar with the 1911 platform is because the correct grip leaves your strong hand thumb on the safety, almost like a shelf for your thumb. If your thumb is there there is no way the safety can move. So given that you are not holding the gun correctly (or the safety couldn't move) I wonder if are also inducing a bit of limp wristing.
  6. Vlad G replied to 1563621's topic in Handguns
    Don't take this the wrong way, but how experienced are you 1911 type guns? Is it possible you are bumping the safety? The correct grip is with your thumb on the safety so I'm not sure how the safety would engage, unless I misunderstand you.
  7. You are over-crimping. If you are denting the bullet that much with the crimp die then back off.
  8. I do it within minutes of spraying, and I do a 10min tumble after I'm done reloading a batch of ammo to get the residue off (there is a whole thread somewhere about *shock* *horror* tumbling after loading). I find that leaving the lube on makes my brass turn all tiger stripped.
  9. They have drive through
  10. Err glock has had recalls over the years.
  11. I just keep a rough count of the cases of ammo or cases of bullets I've reloaded.
  12. The small HF generator is 2cycle btw, so you are going to need to mix fuels, but that isn't the biggest problem in the world.
  13. I don't disagree, but again there is the cost issue. I used a $300 generator to keep up 3 houses during Sandy, and I burned out one power tool charger. Would have I been better off with a more expensive higher end generator? Sure, but only if I had put the $1000 into it ahead of time. The thing about emergency preparations is that they have to make financial sense all along the way. Ideally I'd like 20kW of solar on my roof, 2000ah of batteries in my basement, a wind mill, a tri fuel generator, and geothermal pump. I reality most people are going to get a hell of a lot less. It is important to know and recognized how much you can get for how little if you are willing to accept some shortcomings.
  14. Not gonna happen. A 50% tax on ammo is going to kill this bill before it comes to the floor.
  15. Makes sense, but for emergency use it seems to me the microwave would be the last concern. I do admit I've never tried running a microwave on inverter of any kind, even in the RVs I've been in they were ran on generator power. I will fully support the use of pure sine if you need to run medical equipment. Before you try to rip my head off consider the other aspect of emergency backup power, which is that 99% of the time it is wasted money, because it is not in use. A fairly minimalists system is $500 or so between a battery or two (specially AGM ones), a charger capable of dumping enough amps to charge the batteries quickly, an inverter, and all the cables and such. For my money for such a system I rather have a modified sine and a AGM battery which I don't need to babysit and maintain, then a pure sine and a classic acid battery. For continuous use, I'd probably flip my priorities.
  16. Yes I have, yes some run worse, they also don't burn out or overheat in my experience. You are right I never ran a microwave on one, I never had the need, I'm sure it sucks, but the question a why would you?
  17. A working understand of physics and some experience running them. But I bow to your degree, note that I already said that if you want to spend the money they are better. I like you you fall to insults though, I never claimed to know it all I claimed that the difference is not that important for most applications. Tell me again how that statement is false.
  18. And all of that is free info on the Internet, you almost cut and pasted FAQs, but it also mostly the cya type of information. In practice, for most applications it doesn't matter. I've ran all the supposedly fragile things from both modified sine and non protected generators and they all worked just fine, the only thing I've ever burned out has been the charger for a set of power tool batteries, while using a generator at nearly max power. Also, indeed most digital clocks won't work, but beyond that I don't think it matters. That said, if you want to spend money then by all means, they are better but also slightly less efficient and if you use them at max capacity they end up draining batteries faster, but probably not by meaningful margins. At the 1000w range the price difference is not meaningful but when you move up in power to something that can run sump pumps and fridges and so on with head room the price becomes a significant difference. At the 1000w range then sure, why not.
  19. This is only somewhat true. It is true in general terms but a hell if a lot electronics have power supplies that make this moot. The issues with non pure sine inverters and non inverter generators are generally overblown. That is not to say it can't be an issue, it just isn't a issue for as many things as people say it is. For example most RVs use modified sine inverters and their TV and stereo doesn't free.
  20. Most guns will work long after they way they work is unpleasing. For example I have a CZ75 that works fine but after 65k rounds the slide to frame fit is sloppy enough to affect accuracy. I still shoot it now and then but it is effectively retired. It has used 5 recoil springs, 2 hammer springs, and 3 slide stops (which on a CZ are a wear part turns out, they say 5k, in practice about 10-20k depending on the loads you shoot and the springs you use)
  21. I had stripped the gun at home right before heading to the range (I don't remember why I stripped it that time) and I was in a rush to get to the range because I only had so much time. When I assembled it, I was in such a rush I simply forgot the charging handle.
  22. Forgot my charging handle once
  23. The problem with flat sides is that may never end up lined up "pretty" and OCD people would freak. A much simpler solution would have been a retainer plate with a hole where the nub is and having the nut be able to screw into the retaining plate somehow after it has been tighten, through the plate into the receiver dimple
  24. Err it has nothing to do with torque exactly, it has to do with a need for the tube to stay where it is. The standard rifle setup doesn't have it, because the tube can't move or unscrew as the stock mechanically locks it into place. On the carbine/m4 recoil system there is nothing holding it from spinning, hence a torqued down castle nut. Which in my opinion is dumb as hell, and a expedient hack, because some form of mechanical interference locking mechanism wouldn't have been hard to figure out.
  25. Vlad G replied to the_stranger's topic in Handguns
    The M&P internals are really simple, most of the extras you don't want can be removed or replaced.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.