Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. SUCH AS, those are examples not an exhaustive list. I think realistically you also must include every secured building, private property where the owners request it, etc, etc.
  2. I'm no expert either and I may very well be wrong, and yes it is a significant smack down, but my understanding is that when they rule on case based on arguments and hearings and the decisions are 100 pages worth of legal opinions, those decisions become the core of our legal system. There is no more arguing by the court bellow them on that case, no second chances. When they turn the case back like this it tends to be more of a "bad puppy, you screwed up, please try again" which is not quite as a definitive in the final outcome of the case. I do think this one though is a bit strange, it is so forceful and so clear that it may become precedent setting in how 2A cases get judged, so it may straddle the line.
  3. What I mean is that the SC overturned a decision but didn't actually rule on the case, it just told the lower court to do it again. That is slightly different the the Supreme Court taking the case and hearing it directly and passing a ruling. Those carry a much higher weight. The Lower court could get another stab at the case and decide Heller still didn't apply because the taser ran on batteries charged by a nuclear reactor and that is clearly dangerous and unusual or some other stupid reason and go through this circus yet again. Don't get me wrong, it is unlikely to happen, this was a significant smack-down and it is good that was 8-0, but it doesn't quite carry the same weight as a full SC ruling. It will however provide some avoidance on how to apply Heller, and that is good.
  4. Remember this is not a real decision, it just sends the decision back to the lower court with a huge "oh no you didn't" At best it provides guidance to the lower courts, which is cool by itself.
  5. You all missed the BIGGEST odd thing there with an 8-0, the third reason that got thrown out, that it is not in use by the military .. Well, that was the entire reason behind the 1934 Miller decision that backed the NFA laws. I wonder that if without Scalia there to explain logic and weapons to them, they have mistakenly overthrown the NFA
  6. That's pretty nice, and FN makes solid products. I assume the real price is a couple of hundred less then MSRP. and I wonder what the trigger is, the wording makes it sound like an ALG or something else of that sort. Back of the napkin math says that guns is at least $1000 worth of parts, if you could bring it home for about $1300 with all compliance work done I would call that a good deal.
  7. Hello Forum Stalker, I think so too, but then again who thinks of themselves as being not great, right? So any answers to those questions, or are you still talking about stuff you aren't willing to back up with any data? PS: I can plays this game for some time. Bring it.
  8. Prove it. Are you guessing or do you have chemical analysts to prove it? The internet is all pissed off at times about proving that all sorts of gun oil is vegetable oil, you say otherwise? Also, because you are clearly an expert, please tell me what the maximum PSI inside a engine and what is the maximum PSI inside a firearm. While are at it please document what are the tolerances for fitting engine components and those for fitting gun parts. See you state a lot assumptions, such as engines and guns are similar, but you don't actually back that up with any data. Until you do, your opinion is just that, an opinion, just like mine. Also, militec-1 is kinda shit in my experience, perhaps you are right and it is nothing but motor oil. Also, dear forum stalker, I still have a bunch of questions waiting on you to answer to explain why you hold the beliefs you hold. Until you answer them, you are just running your mouth. I'm willing to back my statements with my experience and experiments on the subject, would you please be so kind to tell me what you have tried as I've asked earlier?
  9. Vlad G replied to MartyZ's topic in AR Discussion
    That looks like a pretty bad leak. It could be the gas tube, it could be the gas block. Buy the cheaper one first (tube) and try again. In my experience, when they match well it is a pain in the ass to get the gas tube in the gas block and I have to hammer on the back (front?) of the gas block with a wood block to get them all the way mated.
  10. Vlad G replied to MartyZ's topic in AR Discussion
    I'd ordinarily agree, but you clearly have a problem, so you solve it by working your way through the obvious first. Also, you should save your brass and look at it for any issues, are the cases showing any rim damage? are they showing pressure signs? Scratches and dents?
  11. Vlad G replied to MartyZ's topic in AR Discussion
    Shouldn't matter. Lots of people runs such a combo. I've ran carbine uppers on rifle lowers, and rifle uppers on carbine lowers with no issues
  12. Vlad G replied to MartyZ's topic in AR Discussion
    The tube doesn't look terrible, unless it is pressfit there is always going to be some gas leaking there. Fix the rings and try again.
  13. Vlad G replied to MartyZ's topic in AR Discussion
    Depends how bad its leaking. Getting worse with every shot means something is moving, a lot. Check your gas block for being on in the correct position and tight. Check that the gas tube isn't moving out of the gas block. Check that it is not getting dented by the carrier. Check that the gas key is tight. Check that the gas rings are still on the bolt.
  14. Vlad G replied to MartyZ's topic in AR Discussion
    If your gas system is leaking, there is going to be soot around the gas block, gas tube, etc
  15. Vlad G replied to MartyZ's topic in AR Discussion
    Check that your gas block is on correctly, not moving around or leaking gas
  16. OMG you are so right you have convinced me with your articulate and detailed response,
  17. And I though 2011 mags were expensive ...
  18. All guns suffer from thermal drift, and that includes their optics. Ammo shoots slower or faster depending on temperature, barrels behave differently, optics contract and expand, so do iron sights and so on. However Trijicon says that total drift over the entire range of 220F is 1,1 MOA on the average. To me that sounds reasonable, compared with what was the eotech? 10+ moa over a 100 degree range?
  19. Yay I win. Look, objectively I agree that lubes are lubes and they all work, you could probably run your guns on bacon fat. Motor oil is just peachy for certain applications, and I actually use it myself on guns, particularly piston actuated shotguns where I find it to be really perfect. I also agree that if you take the religious like attachment to weapons maintenance that some branches of the military embrace, then again it doesn't matter because if you keep cleaning it and keep lubing it all the damn time, who cares how well the oil stays on or wears. However if you are like me, and I'm well aware there are lots of people who are not me, I don't like to spend too much time cleaning my guns or oiling them or checking them for the right degree of dirt in suspension. I like to maybe clean my guns every 1000rd or so, with one or two applications of a couple of drops of lube in between. And I like them to still work, and I found that motor oil doesn't work for that. It doesn't stay in place, it sprays out of the gun more then I'd like, it drains out of the gun if left in the safe for too long etc. There are other products our there that do not do that and are better suited for gun related applications.
  20. Fantastic, you go right ahead and do whatever makes your little heart happy with your own guns. I for one found that using motor oil for all your guns is a pretty dumb idea, as my guns seem to perform better and longer using different types of lubricants depending on what I use them for and how the gun is built and how it functions. I would be curious though to know about your test on this subject. How often do you clean your guns or relube them, both in round count and time interval. What temperature ranges have you tested your motor oil in? Do you recommend a particular viscosity for winter and summer use? What happens if your guns are dunked in water or get very wet? Which motor oils should I use in dusty conditions? Do all motor oils works the same in a gas gun and short recoil gun? Do you recommend one over the other? Which motor oils suspend burned powder better then the others? Apparently you like to comment so all my posts, so lets make a sport of it then. Please let me know how you have tested the above, with what fire arms and what were your results with different motor oils and how those results compared to using gun oils. I await your information with bated breath.
  21. Eric, if it is all the same, next time you change your car's oil would you fill it up with Breakfree CLP? Or whatever gun oil? Why or why not?
  22. I just use the tears of my enemies, they work just as fine and they are just sitting there unused. You know how motor oil comes in lots of grades? Is that because all engines are the same and have the exact some oil requirements or is it because some engines are different then others? If different motors prefer different oil grades, why wouldn't a completely different machines, vastly different from an engine not have its own preferences? What I'm saying is you don't put 10w40 in a engine that calls for 0w20 so why are you putting either in a gun? Mind you, they will work, guns are not really finicky and you could run them personal lubricants if you wanted to, but for a few dollars, get things that have cleaners and preservatives designed for the refuse specific to guns?
  23. I need a production crew and a camera man we are go. I have the script half written. First I shred a target with a .223 double tap and I show everyone how small the holes are. Then I take a might swing with the mace, and show everyone whats left of the paper target. And then we do the ballistic gel substitute test where I pound the crap out of a few fruit cups in gel. I see an Emmy in our future.
  24. Yeah, just be aware of it when you put pressure on handguards, backup sights are backup sights and they'll work, just don't push too hard against the handguard or you'll see you POI move by a few inches at 100 yards.
  25. I think mounting sights on a 15" hand guard is a sub-ideal solution. 15" hand guards flex, all hand guards flex, but long ones flex more, I have no problem deflecting the front sight when mounted on a 13" troy hand guard unless I'm really careful. Backup sights are what they are but on the guns where I have them they are mounted on the barrel and effectively free floated away from the human interface bits (hand guard).

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.