Everything posted by medved11
-
I want a new AK, but havent decided on what
I'll post a pic of my WASR with the Romanian buttstock once I get the front hanguard installed. I'm going for a similar look that I gave my SAM7 (Polish laminate buttstock with the Arsenal quad rail): Sent from my iPhone using Tapatalk
-
I want a new AK, but havent decided on what
That definitely looks good. I wish that I had more time to be able to devote the attention that staining requires but my work schedule doesn't leave much free time. I stained the stock for my M1A SOCOM last year but that was done using Tung oil which was pretty low effort Sent from my iPhone using Tapatalk
-
I want a new AK, but havent decided on what
that looks nice! Sent from my iPhone using Tapatalk
-
I want a new AK, but havent decided on what
True - but I really prefer the rough look of laminated AK furniture. I got a used set with some blemishes so it wasn't that expensive. I'm recycling the metal hardware from the Century set to keep the cost down as well Sent from my iPhone using Tapatalk
-
I want a new AK, but havent decided on what
Congrats on the new WASR My only real "gripe" with the new production WASRs is the blonde wood that Century is using. I'm currently waiting on the UPS truck to deliver the set of Romanian laminate furniture that I ordered from APEX so that I can replace the stock furniture. I'm still debating things, but I think that I'm going to start off with replacing the buttstock for now and then give the new Midwest Industries Gen 2 rail a try on the front end (a little mix of old and modern). Worst case scenario, I can always pick up a new polymer buttstock and go full "modern" or add the Romanian wood front handguard set on. Either way, I know that the blonde wood has to go.
-
Shooting your first reloaded round
I'm in the same position. I just got into reloading as well, loaded some 45-70 rounds last weekend as my first attempt, and now I'm trying to build up the "courage" to actually go and try them out. I'm sure everything will work out fine but there's always that little bit of nagging doubt in the back of my head that I may have missed something.
-
I want a new AK, but havent decided on what
I've been looking at this one this morning...They had a Polish kit build with wood furniture available but I waited too long and they've sold out. https://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/russian-vepr-7-62x39-with-red-russina-stock-set-detail.html?Itemid=0 Not sure if I should go with this one or get an unconverted one and do the work myself.
-
My latest aquisition
Nice looking rifle! I just picked up a Marlin 30-30 last week. To be honest, I didn't have any real interest in lever guns at all until a buddy let me try his out a couple weeks ago and I was immediately hooked. I'm now looking for a Marlin 1894 in .44 mag (and considering rounding it all out with a 45-70).
-
Flash light and mount for 870 with magpul stocks
No worries - the scope is mounted on a railed Mesa Tactical side saddle. I had to play around with that a little in order to get the screws to stay tight but it seems solid now after I degreased them again and reapplied some fresh thread lock Sent from my iPhone using Tapatalk
-
Flash light and mount for 870 with magpul stocks
If you were asking about my gun, it's a Bushnell TRS25 red dot. It works well for slugs, I've got about 100 rounds put through the gun with it on and it seems to be handling the recoil okay so far
-
Flash light and mount for 870 with magpul stocks
I've got a Streamlight TLR1 mounted with a piece of pic rail Sent from my iPhone using Tapatalk
-
AR Build Done - Now for the Painting
I was going to wait until I got the full paint job finished before posting a picture of the full project. The plan was to start on the rifle yesterday evening but, after painting another magazine to test my pattern, I decided that the humidity is just too high for spray paint One thing that I noticed while doing that magazine is that Aervoe paint (Coyote Brown in this case) seems to be much more humidity sensitive than Krylon and Rustoleum and stayed tacky for quite a long time, despite being very lightly applied (3 very light base coats with about 5 minutes between each pass). This is compared to how the paints reacted on Monday when the humidity was relatively low and the paints all seemed to dry at about the same rate. Hopefully, the humidity will drop some by the weekend and I can get the gun painted and pictures posted.
-
AR Build Done - Now for the Painting
Yeah - I was thinking that I may go back over the scope with some more dabs of Sand and Woodland Green. I wanted to let the paint set to see where it's at before doing that though Sent from my iPhone using Tapatalk
-
AR Build Done - Now for the Painting
Thanks - it's actually real easy... 1) Prep the surface by degreasing everything 2) spray two or three very light coats of khaki 3) tiger stripe with Sand and Earth Brown 4) using a natural sea sponge dab on a random pattern of Black, Coyote, Tan, Sand, and Woodland Green, and Earth Brown Each magazine took about 15-20 mins and the scope took about 35 mins Sent from my iPhone using Tapatalk
-
AR Build Done - Now for the Painting
I just finished building my last lower, so I started painting today. I wanted to try out my pattern, so I painted a couple of magazines and my scope first. What do you guys think? The scope: The mags: I'm going to let the paint dry for a couple of days to see what the final shades and tones look like but so far I like the results Sent from my iPhone using Tapatalk
-
Post Your Tactical Shotgun Pics
- Remington 870 w/18.5" barrel - Magpul SGA furniture - Mesa Tactical railed side saddle - Bushnell TRS25 - Streamlight TLR-1 - Rattle can paint job with an overspray shot through a laundry bag to soften the edges (the color is a little washed out in the pictures above - it's actually a bit deeper): My original plan was to add a Wilson Combat extension but had to let it go since my magazine tube seems to be out of spec; neither the WC or Vang Comp extensions would thread on. The last piece that I'm going to add is a Proctor sling (I just need to add the sling mount to forend) Sent from my iPhone using Tapatalk
-
Need Some Help - Wilson Combat 2 Round Extension Won't Thread onto 870
Thanks, I'll give that a try tonight. I'm guessing that there's not much I can do if my tube it outside the diameter of the extension?
-
Spikes DynaComp - Definitely Not a Flash Hider
I think that the ammo definitely played a part in the intensity of the flash. I tried the surplus Federal and IMI 5.56 rounds last night and, while there was definitely visible muzzle flash, it was nowhere near as intense as it was with the Freedom Muntions .223 rounds
-
Need Some Help - Wilson Combat 2 Round Extension Won't Thread onto 870
I'm hoping that you guys can help me out with a issue that I'm having with a Wilson Combat 2 round extension that doesn't want to screw onto my 870 Express before I decide to send it back to Midway USA. I removed the factory cap from the magazine tub and tried to screw on the extension but could only get it to catch one or two threads before it wouldn't turn any further. I took a look at the threads inside the extension and they look fine as do the threads on on magazine tube itself (I don't see any burrs or easily detectable deformations in the threads). I tried screwing it on with and without the barrel attached to check if the barrel was interfering at all with the same results I ran over to a friend who has 11-87 to see if it would screw on okay and it did (with and without the barrel being attached). I was also able to screw on his factory cap to the 870 all the way down to the end of the threads (I've got no issues with getting my own factory cap screwed down all of the way either). Does anyone have any ideas what's going on here? I seemed to have narrowed the issue down to the threads on my 870 but I don't see anything obvious. I thought about putting a die on and chasing the treads but from what I've been able to find on the web, there isn't a die that will fit. Any advice would be greatly appreciated
-
Spikes DynaComp - Definitely Not a Flash Hider
It's a 16" BCM barrel. I was thinking that it may be powder thing as well - I'm going to try some surplus Frderal and IMI 5.56 to see if I get muzzle flash like this again. Sent from my iPhone using Tapatalk
-
Spikes DynaComp - Definitely Not a Flash Hider
I took my new AR build to the range this weekend to do a quick function check. Everything worked perfectly - the one thing that I wasn't expecting was the the muzzle flash from the Spikes Dynacomp. The "funny" thing is that I've got the same comp on my other build but never shot it indoors. I had no idea that the comp produced such an intense flash. I was using is 55g .223 from Freedom Munitions Sent from my iPhone using Tapatalk
-
Bushnell TRS-25 on 870?
Thanks - I'll give it a try and see what happens after 100 rounds or so
-
Bushnell TRS-25 on 870?
One more question regarding regarding my 870 project... How well will a Bushell TRS-25 handle the recoil from an 870? The reason that I'm asking is that I've got a old TRS sitting in my parts drawer and rather than letting it sit there an gather dust, i'm thinking about putting it on the 870. The scope is going to mounted to a Mesa Tactical sidesaddle that has the integrated picatinny rail rather than a rail that is attached to the receiver directly (less recoil impulse?).
-
Light/Mount Combo for 870 HD Gun?
Thanks for the suggestions. A buddy that's doing some upgrades to his gun gave me his StreamLight TLR1, so I'm going to give that a try on the gun (I'm not sure how well the rocker switch activation is going to work in this application but I'm going to see what happens). If it doesn't work out, then I'll probably go with the Inforce WML a try. I'll post some pics of the finished project once I've got everything installed (I'm waiting on a 2 round mag extension and a Mesa Tactical side saddle).
-
Light/Mount Combo for 870 HD Gun?
I'm hoping that you guys can help me find a good flashlight mount for my 870 HD project. I just installed the MOE forend on the gun last night along with a 7 slot piece of Picatinny rail mounted on the right side for the light (I'm left-handed). Can anyone share their set up or offer any suggestions in terms of a light/mount combo that seems to work well? I'd like to try and keep the price of the mount and light in the $150-$200 range. Sent from my iPhone using Tapatalk