Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

medved11

Members
  • Joined

  • Last visited

Everything posted by medved11

  1. I ended-up not really liking the C39v2 for a bunch of reasons. I sold it over the summer and picked up an Arsenal SAM7F-66 a few months ago and love it. There's a ~$500 difference between the C39v2 and the SAM7; however, I think that you get a much better gun for the money with the Arsenal.
  2. I bought a 1/4 oz tin of Aeroshell from Amazon a few weeks back in preparation for my build: http://www.amazon.com/gp/product/B00WOJPWNK/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687502&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00FSD37CM&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1BA7YDFTCRVZC20FM92R They're out of stock now but should have some back in by 2/21.
  3. SG Ammo will ship mags to Nick over at Bad Element Co.
  4. I've used Rustoleum spray paint on my AK and its held up real well for a year (so far). The only discoloration that I've seen is around the brake and gas block Sent from my iPhone using Tapatalk
  5. Has anyone installed a barrel into an upper using a Magpul BEV Block? The reason that I'm asking is that I'm mating a BCM upper with a BCM 16" barrel and the fit between the two is extremely tight. My plan, when the time comes to install the barrel, is to follow the advice on the BCM website and put the barrel in the freezer overnight and to heat the upper with a hair dryer, as well as coat both pieces with a thin film of moly grease. Here's the real question... What's the best way to use the BEV block in order to get the barrel properly seated into the upper once I've got the barrel extension mated with the BEV block? Is there anything wrong with using a block of wood and dead blow hammer on the back of the upper to mate the two pieces or should I just try to "man juice" the thing on, hoping that the heat and grease will allow the barrel to seat itself properly?
  6. It's a 16" BCM barrel. I decided to go with the Dynacomp earlier today after going through a bunch of reviews and deciding stop worrying if I do end up being "that guy" at the range. I'm pretty sure that my SOCOM 16 already puts me in that category. I was thinking about going with a 14 inch barrel originally with this upper build but changed my mind when someone offered me a really good deal on the 16" barrel that was NIB. Sent from my iPhone using Tapatalk
  7. I figured that I'd throw this link into the thread just in case someone comes along later trying to do some muzzle brake research. It's got some decent information as well as links to the YouTube video of the testing: http://www.thetruthaboutguns.com/2015/04/jeremy-s/ar-15-muzzle-brake-shootout-2/
  8. They do come pre-drilled according to the description on the JoeBob Outfitters site
  9. I just checked on the status of the tracking number for my package with the and it's on a truck for delivery today. I know that I didn't really have anything to worry about after having read through all of the USPS rules, but it does seem that people do occasionally run into trouble when sending non-controlled parts (like a barrel) through the mail. like this guy: http://www.defensivecarry.com/forum/general-firearm-discussion/201704-gun-barrel-shipping-via-priority-mail-help-problem.html
  10. Thanks for all of the info - I went ahead and bought the Dynacomp from JoeBob Outfitters. I ended up getting free shipping since I tossed in a Magpul Fixed Carbine stock and a couple of other small parts that I need to finish the upper.
  11. Thanks for pointing out the Griffin Armament brake to me - could you tell me a bit more as to what you prefer about it over the Dynacomp? Sent from my iPhone using Tapatalk
  12. I'm trying to decide between the three following muzzle devices for my build. Can anyone that's used them give me some pros and cons? I've seen a couple of posts here about the Claymore (which seems to get "two thumbs up") but I didn't see much about the other two. Spikes Dynacomp: http://www.primaryarms.com/sbv1017/p/sbv1017/ Smith Industries Good Iron: http://www.primaryarms.com/1002-ss/p/1002-ss/ Troy Claymore: http://www.primaryarms.com/sbra-clm-05bt-00/p/sbra-clm-05bt-00/ I'm leaning towards the Claymore in order to avoid being "that guy" at range. Has anyone had any trouble drilling through the Claymore in order to pin it? I saw a few reviews on some other sites where it was mentioned that this was difficult to do.
  13. It's funny that you say this because I really wasn't feeling questionable about this until after I read the USPS rules, even though it seems pretty clear that mailing a barrel is okay.
  14. I wish I had though about that before I shipped it - It wasn't "squeaky" clean when I wrapped it up; however, I did run about 3-4 patches soaked in CLP through it before putting it in the tube for shipping just so that it would be clean for the guy who bought it from me.
  15. No questions where asked of me by the clerk when I mailed the barrel 2-Day Priority Mail other than the standard "anything liquid, fragile, explosive" question that they make you sign for pretty much every box that you send via USPS. The barrel (with nothing else attached or included in the package) was wrapped in bubble-wrap and then put into one of those plain white tubular mailers from Staples. Following below is a list of the postal rules that I was looking at while trying to figure this all out just in case anyone needs them for future reference: http://pe.usps.com/text/pub52/pub52c4_008.htm#ep344365 http://pe.usps.com/widgets/hyperlinking/highlighted-viewserver.jsp?id=199&title=432%20Mailability&url=56.42.178.30%3A9080%2Ftext%2Fpub52%2Fpub52c4_009.htm&links=FIREARMS%20#hit0
  16. I'm correct in thinking that a barrel is not a controlled part in any way, correct? I've looked at the USPS rules and, if I'm interpreting them correctly, they shouldn't care as long as the barrel isn't attached to a serialized receiver (which it isn't). Would shipping it two-day Priority Mail make any sort of difference since I'm presuming that it will go by air at some point in order to get to Washington state? I don't see how it could since a barrel is not explosive or hazardous. I'm probably overthinking too much but I just don't want to screw up.
  17. Do I even need to declare what's inside the package since it's not a firearm? I've never actually been asked what's inside of a package other than to state whether it contains anything liquid, fragile, or prohibited (like lithium batteries, gasoline, etc.), which this isn't.
  18. Can anyone tell me if I could run into any issues mailing a used 22" rifle barrel (with no receiver attached or serial number etched) to someone using USPS Priority Mail. I've looked at all of the the rules that I can find on the USPS website about shipping restrictions and there doesn't seem to be any issue with firearms parts as long as they cannot be reconstructed into a usable weapon. If I read everything correctly, there's no requirement to even declare that the package includes non-controlled parts such as a barrel.
  19. What's the general opinion on the Levang comp? I'm trying to pick a brake/comp for my build and I'm having some trouble deciding what to go with.
  20. You're good to go as long as the brake and stock are pinned. I wouldn't go with the metal triangle folding stock unless you've shot one before and liked it - stick with the plastic stock Here's a link to one with plum furniture and the plastic buttstock - I've purchased from Bob at Cheyenne before and would recommend him highly I believe that Arsenal has mentioned that they won't be producing the 107s for the US market again until 2017, so I wouldn't wait too long if you want to grab one. http://shop.cheyennefirearms.com/product.ars-slr-107fr-762x39-plum-163-fold-stk-10rd-6
  21. The one and only complaint that I had about my SAM7 was the intermediate length buttstock which I could never get comfortable with. I solved the problem by pulling that one out and replacing it with a Warsaw length Polish stock. It took a decent amount of sanding to get it fitted correctly, but the effort was well worth it.
  22. If budget isn't an issue and you don't mind a (slightly) heavier gun, then I would go with a Arsenal SAM7.
  23. Now that I've got the upper, barrel, and gas block/tub ordered, I'm wondering if I'm going to need a new buffer? I'm assuming that there's a carbine weight buffer in the gun now given its current configuration - should I wait to order a mid-length buffer until I can test fire it after I put the new parts on or is it a needed part change? One other question: What grease should I be using when I install the barrel on the upper? I've seen various posts which say that you should use Shell AeroShell, but I haven't seen anywhere where that's even remotely economical. Can anyone recommend an alternative?
  24. I ended up buying a BCM stripped upper and barrel on Friday. I figured that it's time that I teach myself how to put together an upper. I'm assuming that I shouldn't have any issues with the fit between the BCM upper and my Bushmaster lower. I can deal with a little bit of slop as long as it won't cause any issues with function.
  25. Did you already have a lower in your possession when you ordered the complete upper? The reason that I am asking is that I'm still thinking about buying a complete upper, but I'm wondering how to do so legally if I already have a lower and the complete upper assembly is shipped with the "evil" features intact (bayo lug, flash hider, and threaded barrel). Wouldn't doing this put me into the whole "constructive possession" problem. Does an upper like this need to be shipped to an FFL so that they can do the compliance work? I'm sure that this has probably been addressed in other threads - I just haven't had a chance to use the search function yet

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.