Everything posted by medved11
-
Looking for a New 5.56 Upper - Opinion on Radical Firearms Complete Uppers?
I'm starting thinking last night that I may try to go a different route and try to "salvage" the barrel, gas system, and BCG from my existing upper, buy a new upper (like the one I've linked to below), and then re-install everything. This would (seemingly) save me a decent amount of money. Is there anything wrong with this plan? Is there anything that I need to watch out for? http://www.bravocompanyusa.com/BCM-Upper-Receiver-assembly-M4-Flat-Top-p/bcm4-ur-m4.htm
-
Looking for a New 5.56 Upper - Opinion on Radical Firearms Complete Uppers?
I'm giving this a little more thought and I think that I may want to "bite the bullet" and build my upper using this as the base. I'll just extend my timeline a little and start buying parts piecemeal: http://www.bravocompanyusa.com/BCM-Upper-Receiver-assembly-M4-Flat-Top-p/bcm4-ur-m4.htm Can anyone suggest any other uppers that I should I take a look at?
-
Looking for a New 5.56 Upper - Opinion on Radical Firearms Complete Uppers?
I'm hoping to get some opinions on Radical Firearms complete uppers. A little background... I've got a Bushmaster XM15-E2S with a fixed carry handle upper that I bought awhile back that hasn't seen much use in awhile. I'd like to start taking it to the range again when I get the time but would first like to swap out the current upper receiver with a flat top so that a red dot scope can be mounted. I'm thinking about building a new upper from scratch but I'm also considering just buying a new complete upper and calling it a day. I want to keep myself within a budget of $500-$600 for the new upper and that's when I stumbled onto the Radical Firearms complete uppers over at the Primary Arms website. They seem to receive good reviews overall I'm leaning towards the route of buying a complete upper instead of building one since I don't want to invest a lot of money in tools that I may only be using once. Does anyone have any experience with these complete uppers?
-
Should I get AR-10 or AR-15
I wish I had know that before I picked up a SOCOM a couple of weeks ago. I got bored while Carl L. was working on re-barreling my other M1a and ended up buying a SOCOM after handling it at the store.
-
M1a Gunsmith/Armorer in NJ?
Thanks - the elevation on the hooded sight is a bit of a PITA to adjust but I really like the sight picture. It's probably a little less precise than the standard sight but this one's easier for my eyes to work with for whatever reason Sent from my iPhone using Tapatalk
-
M1a Gunsmith/Armorer in NJ?
Here's a shot of the new front end of the rifle: It's got a Springfield muzzle brake and an SEI hooded gas lock front sight. All of this is sitting on the end of a new Criterion 18.5" barrel. I put 100 rounds through it today and it functioned perfectly. I still need to tweak the elevation a little bit but the windage is fine at 100 yards Sent from my iPhone using Tapatalk
-
M1a Gunsmith/Armorer in NJ?
I'll try to post some "after" pictures over the weekend while I'm at the range breaking in the new barrel a little. So far, I can say that it feels like a completely different gun with the shorter barrel and the hooded gas lock front sight (the thin front blade is very easy to pick up and focus on). I'm still in the process of finishing the walnut stock that will eventually replace the plastic SAI factory stock that on it now. I've got two coats of 50/50 tung oil and mineral spirits rubbed in so far. I'm letting the second coat soak in for another day, after that I'll start rubbing in 4 or 5 coats of 100% tung oil.
-
M1a Gunsmith/Armorer in NJ?
I completely agree - Carl is a great guy and I'm glad that you recommended him to me. I learned a lot of practical information about the M1a in just a few short conversations with him. Carl's even got me considering setting up a small re-loading station in my garage after a short conversation about the overall process (it turns out that I was over-complicating the process in my head).
-
M1a Gunsmith/Armorer in NJ?
I picked up my rifle from Carl this evening and it looks great (he did an awersome job on the barrel and front end) - I'll post some "after" pictures once I can get the gun into some good light
-
Double Feed Issue - Issue Caused by Paint Interior?
I found a reliable 10 round AR mag for us to try with some quality ammo. I'll post an update once we try this out Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
I'll see if he's knows anyone that can loan him a BCG to test. The gun in question is his first AR, so he probably doesn't have any spare parts built up yet. He's going to try and borrow a different magazine as well Sent from my iPhone using Tapatalk
-
M1a Gunsmith/Armorer in NJ?
Here's a very boring "before" picture of my plain vanilla 22" Standard M1a I'll post more detailed "after" pictures after the work is completed Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
Thanks for the info - I'll pass it along to see if he can figure this out. The gun is made by Anderson. What's the general opinion regarding their quality? Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
Thanks - I've passed the info along. I'll post an update once he has a chance to check things out and hit the range next weekend Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
I'll ask if he's got other mags to try. He had two different Hex mags with him yesterday. Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
He only had the Hex mags. I was shooting a .308, so I couldn't give him one of mine to try. It was a really weird thing. I've never seen a rifle have so many consistent jams. Maybe an issue with ammo? I know that he had one round that seemed like the bullet was not properly crimped into the case. I discounted it at the time because I thought that it may have been the result of the misfeed Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
What makes me think that it might be the paint is that the problem went away as long as the gun was running wet Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
I'm not sure if it's relevant but he was using a Hexmag and Freedom Munitions ammo Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
It was a mix, which was a weird thing to me. There would be a double feed of a live round behind a spent round which was cleared, followed by a double feed of two live rounds. The triple feed was a spent round with two live rounds jammed. To clear that one, I have to mortar the gun to get the bolt to spit out the spent brass - I then had to push down on the upper and pull the rear pin to relieve enough pressure to drop the magazine and clear the two live rounds I hope that makes sense. Sent from my iPhone using Tapatalk
-
Double Feed Issue - Issue Caused by Paint Interior?
I was at the range yesterday with a friend who brought a new 5.56 AR with him (I forgot the make/model). Anyhow, he kept having repeated issues with double feed and even one triple feed jams (which required mortaring the gun and a dis-assembly to clear). I'm not an AR expert, but I'm thinking that the problem may the result of the interior of the upper receiver having been painted when it was Cerakoted (that extra .001 inch of paint causing friction/drag). Does this seem plausible? The problem seemed to be temporarily resolved when the BCG was coated in CLP; however, after a few rounds, the feeding issues would start again Is there anything else that he should look at inside of the upper or the BCG in terms of what might be causing this issue?
-
M1a Gunsmith/Armorer in NJ?
I think so too based on some other recommendations that I've received for him as well. The Brown Truck showed up yesterday with my parts, so I'm all set to drop everything off and let Carl do his thing. I'll post some "before" pictures of my rifle later on, but I'll probably wait to post the "after" pictures until I can complete the finish job on the stock (I picked up a new unfinished walnut stock from Fulton Armory - I'm going to finish it using just pure Tung oil and some Gunny paste).
-
M1a Gunsmith/Armorer in NJ?
Yep - I'm going to Carl. I'm just waiting on the Big Brown Truck to bring the last of my parts so that I can take everything over to him.
-
NJ AK Law / seeing people at the range with 'em anyway....
100% correct! After reading all of the "horror stories" about Yugo cheek slap I was expecting to get beat to hell when I shot my NPAP for the first time. However, I quickly realized that if you follow the instructions of getting your cheek down on the stock with your nose almost touching the dust cover (and squaring your shoulders towards the target) then there is almost zero cheek slap.
-
M1a Gunsmith/Armorer in NJ?
Thanks for the recommendations - I'll post some before and after pictures once I get this project started
-
M1a Gunsmith/Armorer in NJ?
Thanks for the telephone number - I'll give him a call today. Ewing's not that far from me so not having to ship the rifle is a big plus.