Everything posted by medved11
-
How is red army standard ammo?
Red Army Standard is decent ammo. I've probably shot about 500+ of both the 5.45 and 7.62 and never had any issues in terms of FTF or FTE. The one true "bonus" that I've noticed is that it doesn't have that "burning cat pee" smell that some AK ammo has
- Any non Century made AK is available in NJ?
-
Any non Century made AK is available in NJ?
I'm guessing that you're talking about the AKR mount from RS? That's a great mount but I don't think that it will provide enough space for an RDS and a magnifier to mount securely. I have seen some guys use a dust cover mount to hold the magnifier with the RDS mounted on the top rail of the handguard but that always seemed goofy to me. As long as you don't mind the scout setup for your RDS, I think that the Ultimak (or any other forward rail) is going to the best way to mount a magnifier/RDS combo.
- Any non Century made AK is available in NJ?
-
Any non Century made AK is available in NJ?
If you need more 5.45 magazines, and don't want to be limited to Tapco, then order some Bulgarian 30 rounders from SGAmmo (http://www.sgammo.com/product/545x39-ammo/russian-ak-74-545x39-caliber-30-round-mags-sale-plum-polymer-tula-mfg-very-good-) When you check out, have the magazines shipped directly from SGAmmo to Nick at Bad Element (he's in Utah) so that he can make them NJ compliant for you. He'll do the work and and then mail them to you via USPS Priority Mail. Nick will give you the correct address to ship to when you contact him. You can have him cut the 30 rounders down to 15 round Tanker style mags or just have him block them to 15 rounds (you could also have him cut them down to a traditional 20 round Tanker style mag and then block them to 15). Nick made some 15 round Tanker mags out of the ones that I linked to above and they have worked perfectly. I think that I paid around $20 each for the cut-down service (on top of the original purchase price). It's gets a bit pricey for these mags but I think that it's a "buy once, cry once" situation since the Bulgarian mags seem to be constructed much sturdier than the Tapco mags. Here's Nick's website (he's a good dude and a veteran that does great work, so I try to support his business as much as I can): http://www.badelementco.com/
-
Any non Century made AK is available in NJ?
If you want space for a magnifier and don't mind a forward mounted RD scope, then consider installing Ultimak M1B rail (http://ultimak.com/M1-b.htm) and a Primary Arms Advanced Micro Red Dot sight (http://www.primaryarms.com/primary-arms-advanced-micro-dot-with-push-buttons-and-up-to-50k-hour-battery-life/p/kt-md-ads/). This set up will give you plenty of room for a magnifier. I've used this set up on a couple of my guns and it works pretty well
- Any non Century made AK is available in NJ?
- Any non Century made AK is available in NJ?
-
Any non Century made AK is available in NJ?
7.62 and 5.45 options available from Bob over at Cheyenne Gunsmith in Manville. I've bought a couple of guns from him and he's been great to deal with every time: http://shop.cheyennefirearms.com/product.arsenal-inc-sam7r-61-semi-automatic-762x39-16-black-finish-polymer-stock http://shop.cheyennefirearms.com/product.arsenal-inc-slr104-semi-automatic-rifle-545x39-16-black-side-folding-1-mag
-
Spikes Lowers
I also bought a Spikes spider lower from Steve (Monmouth Arms) just a little over a month ago. Howell Gun Works also usual has some in stock as well.
-
DiamondHead T-Brake Length?
No worries - I was doing some additional searching this morning and found this link which mentions that it's long enough to bring a 14.5" barrel to 16" (see the end of the first paragraph). There's still no actual measurements provided, but at least there are several reviews/posts that seem to confirm that it will bring the length out to 16" (although it would be nice to know the exact measurements). http://modernserviceweapons.com/?p=11901
-
DiamondHead T-Brake Length?
The actual specs (in terms of length) for the T-Brake seem to be a state secret. I just spent a few minutes looking and couldn't find anything. I did find this page that has picture of a AR with a 14.5" barrel with a T-Brake pinned and welded (2nd post on the page): https://www.ar15.com/mobile/topic.html?b=3&f=4&t=409405&page=227
-
XM855 5.56 Okay at Range 14?
Understood - I figured that it was okay bu just wanted to doublecheck before buying ammo
-
XM855 5.56 Okay at Range 14?
I guess that I kind of deserved that - this being NJ, I just figured the obvious answer would be the wrong the answer
-
XM855 5.56 Okay at Range 14?
Does anyone know if Range 14 has any restrictions against using XM855 ammo? I've never seen anyone inspect ammo there but I'm wondering if they would exclude it due to the potential damage that it could do to the berm over time. It's not specifically mentioned in the rules but I'm wondering if anyone has ever run into issues using it there.
-
Roll Pin Size for Trigger Guard?
I got my homemade roll pin inserted without issue using the Little Crow pin pusher. It only took about ten turns of the screw to get the pin seated flush. The only issue that I have to take care of now is putting a dab of paint on the end of the pin that I cut down Sent from my iPhone using Tapatalk
-
Roll Pin Size for Trigger Guard?
I'll have to remember that for next time. The detent took thee ricochets before landing. I was able to follow the first two but lost it on the third one. I ended up borrowing a neighbor's magnetic nail roller and found it (along with about 50 staples and some various other junk) that way after crawling along the floor with a flashlight. Sent from my iPhone using Tapatalk
-
Roll Pin Size for Trigger Guard?
Thanks - this chart is great. 0.625 is equal to 5/8, so the 1/8" x 1" roll pin that I cut down to 5/8" should work okay. That having been said, I just spent almost two hours crawling around on the garage floor looking for the front take down pin detent that I accidentally launched into low orbit (I did actually find it), so I'm going to wait until tomorrow to put the trigger guard in.
-
Roll Pin Size for Trigger Guard?
I sometimes get all "Hulk, Smash!!!" with hammers, so I figured that the press would be the best route to go - I've got the roll pin cut to 5/8" length, I'm going to check my measurements again to be sure and then press the pin in
-
Roll Pin Size for Trigger Guard?
I could only find a package of 1/8 x 1 package of pins, so I'll have to take a hacksaw and cut one down to size. Does anyone have any advice before I try this? I'm presuming that I should take a file to the edge of the roll pin that's going into the ears and add a little oil to it. Should I also crimp that end as well? I bought one of these last week to get the pin in an effort not to break of the ears: https://littlecrowgunworks.com/product/rpp/
-
Roll Pin Size for Trigger Guard?
Can anyone tell me what the roll pin size is for the trigger guard? I bought a Seekins Precision trigger guard for my build and didn't realize that it doesn't come with a roll pin (I chose a LPK that did not include a trigger group or the trigger guard because I wanted to "upgrade" those parts). Rather than having to order a pin online and pay for shipping, I was hoping to run over to Lowes or Home Depot and pick up a pin or two but I'm not 100% certain on the size. I saw the following measurements on another website. Can anyone confirm if this is correct? Trigger Guard roll pin___ L = 0.610 INCHES MIN AND 0.640 INCHES MAX ____________________DIA = 0.131 INCHES MIN AND 0.135 INCHES MAX
-
15" Troy Alpha Rail on a 16" Barrel?
I get what you're saying - the worst case scenario here is that I end up putting a scope on the gun and the sights become back-up.
-
15" Troy Alpha Rail on a 16" Barrel?
I ended-up ordering the 15 inch Alpha rail and a Spikes Dynacomp Shorty to go with it. I'm not 100% certain that I'm going to mount an optic on this gun so I figured that the extra couple of inches will help extend the sight radius a little further than on the 13" version.
-
15" Troy Alpha Rail on a 16" Barrel?
Thanks for the pics - I'm starting to be swayed towards the 13" rail Sent from my iPhone using Tapatalk
-
15" Troy Alpha Rail on a 16" Barrel?
I'm thinking about putting a 15" Troy Alpha rail on my next build that will be using a 16" barrel with a pinned Surefire brake or Dynacomp (I've got both brakes in my cart but one or the other is going to be deleted) but I'm having a little difficulty picturing how that set up will look. Does anyone have any pictures of a similar set up that they can share to help me visualize this set up? Sent from my iPhone using Tapatalk