Everything posted by medved11
-
Saiga Conversion Question - FCG Retainer Plate Fit
A quick question related to the Saiga conversion that I'm starting this weekend... I've seen some online posts stating that guys have had trouble getting the Tapco FCG retaining plate to fit properly inside a Saiga 7.62x39 receiver (it eventually fits but with some minor dremel work). Most of these guys have said to just order a Krebs Custom plate and avoid the headache and looking at the kits on the Carolina Shooters Supply site, it seems that most of their kits come with a retainer that looks like a Krebs. Have any of you guys run into issues with getting the Tapco plate to fit? I'm okay with doing a little grinding here and there to get the plate to fit, I just want to avoid getting into a wrestling match with the gun in order to get it to go in properly.
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
That seems to the easiest way to do it from what I've seen on YouTube. What about threading the barrel so that a muzzle device can be welded on. Is this something that can be done at home or is it better to leave it to a gunsmith?
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
One more question about bullet guides. If I understand correctly, you need to install a bullet guide in order to use standard (non Saiga) magazines and that there are two ways of installing one - either using a screw or a rivet. I've read a few threads were guys claim that the "best" (and milspec) way is to rivet it in, while others say that this is unnecessary and that using a screw is just fine. There is a third group of people that used JB Weld (I'm presuming that this is not the way to do it). For the guys here that have done conversions, which method (screw vs. rivet) did you use?
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
Another couple of "newbie" question about the Saiga conversions. I'm really starting to warm up to the idea of trying this but I want to make sure that I understand the whole picture before I jump in: Full vs. Partial Conversion: I saw some reference to these terms in some of the threads that I was reading? What's the difference Stocks/Handguards/Gas Tubes: Am I correct in thinking that all of these parts are standard AKM size and not "unique" like Yugo AK parts? Magazines: From what I've read so far, you need to use Saiga specific mags unless you install a bullet guide (which doesn't seem to difficult based upon what I've seen on YouTube Muzzle Brakes and Front Sight Block: From what I've seen most Saiga's don't have muzzle brakes - Is there a reason why most guys don't seem to add one, other than to avoid the hassle of having to thread the barrel? Same goes for the Front Sight Block - is there a reason that these don't seem to get upgraded? Tools Required: From what I've seen and read, it seems like you just need some basic hand tools to get the job done - it seems like a drill press may make some of the process go more smoothly
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
I've watched the videos and I'm getting intrigued by the conversion idea. Any recommended sources for a Saiga? I'm thinking Atlantic Firearms but I'm also wondering if there are other good sources Sent from my iPhone using Tapatalk
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
Thanks for links - I'll be back with questions after watching them Sent from my iPhone using Tapatalk
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
I don't have the space for shop tools so I'd have to have a shop do the work Sent from my iPhone using Tapatalk
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
Sorry for the naive question (I'm still an AK newbie) but what's involved with a Saiga conversion? Sent from my iPhone using Tapatalk
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
I'm definitely looking for a custom build rather than a historical build. Ideally, I'd like something modern and tuned but not too weighed down - this is what drew me towards the RD builds initially. I don't tend to hang a lot of accessories on my guns, so the Ultimak rail is sufficient for an RDS and a light if I needed one. I hadn't heard of AKUSA before so I'll have to check them out. Sent from my iPhone using Tapatalk
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
I looked at the Krebs site and unlike RD's site, I couldn't easily figure out what they were offering in terms of their custom guns. They have a banner link to their KV-13 model but it doesn't indicate whether or not it's still in production (not to mention I wasn't really liking what it looked like) Sent from my iPhone using Tapatalk
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
From what I understand from guys on other AK specific boards, the wait time for RD to complete upgrades can be almost as long as having them complete a custom gun. I guess it depends upon what you want to have done. What interests me most about their custom guns is the front end modification that they do - the added bonus being that the muzzle brake is permanently welded to the barrel as part of the process so you eliminate the NJ compliance issue. The standard brake that they offer isn't NJ compliant since it's also a suppressor, but they do stock a brake that is NJ compliant
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
They (the RD guns) definitely do look good - I'm tempted to jump on one but I want to make sure that I explore my other options before doing so. I was looking at DDI AKs as well; however, they sold out on Atlantic Firearms shortly after the AK Operators Union guys nominated their guns as their "King of the Hill" a month or two ago. I've looked around on other online retail sites and they seem to be out of stock as well.
-
Rifle Dynamics RD703 - Worth the Price and the Wait?
I'm looking into adding a new AK to the collection and I'm considering taking the plunge and ordering a custom RD703 from Rifle Dynamics. I've checked with them and got a quote for a build that would be NJ compliant "out of the box" Does anyone have any experience with these guns? Are they really worth the extra money and the wait (6-8 months from the time that the order is placed) My other idea was to order a stamped Arsenal AK from Atlantic Firearms and then try to find someone in NJ that could help me customize it Basically, I'm looking to take a step up to the next level from the AKs that I've already got (NPAP, WASR, C39V2). As always, any comments or suggestion from you guys that have been in the AK world longer than me are greatly appreciated.
-
Thoughts on the CAI C39v2 AKM?
Did you end up buying it?
-
Thoughts on the CAI C39v2 AKM?
Monmouth Arms has them according to their website. http://monmoutharms.com/firearms.html
-
Springfield M1A MP 9220 - Legal in NJ?
There's a discussion on another message board about whether or not the Springfield M1A MP 9220 is legal in NJ. I could swear that I've seen someone at Range 14 with one. Can anyone confirm that it's legal in NJ.? I don't see why it wouldn't be as long as it doesn't have a bayonet lug, the muzzle device is pinned, and used with a 15 round mag. Sent from my iPhone using Tapatalk
-
15 round AK47 mags
RTSP in Randolph has them in stock occasionally. I haven't bought any from them but I do remember seeing them there (I've been using 10/30 US PALM mags and Magpul mags without issue) Sent from my iPhone using Tapatalk
-
Thoughts on the CAI C39v2 AKM?
I haven't seen any pictures of a v2 with a siderail mount - just the RAS 47s. I've got an Ultimak M2-B tube sitting on the workbench waiting to be installed as soon as FedEx delivers the new red dot scope to me.
-
Thoughts on the CAI C39v2 AKM?
I've had a C39v2 for a few months and have put about 400 rounds through it so far without any issue. Overall, I've got no complaints with it - the fit and finish are excellent. The only disappointment that I can express (and has been beaten to death on other forums) is the lack of a side rail for optics. I've picked up an Ultimak gas tube to get around this but just haven't gotten around to installing it yet. The only other minor complaint that I have is that the safety was an extremely tight fit (tighter than any other AK safety that I have before) - I had to really bend it in order to make it so that I could comfortably move it to the fire position without having to use more than two fingers to get it to move down. The gun was pretty much zeroed at 100 yards out of the box and I only had to fine tune it a little (I'm not sure if I got lucky or if they bore sight them at the factory). I'm not a real fan of the Magpul look, so I'm going to leave the wood furniture alone for now. The only "upgrade" that I've made so far is to replace the paper clip with a retention plate. Other than that, the Ultimak gas tube and red dot sight are the only upgrades that I'm going to do for now. The first round or two of the RAS 47 guns had some quality control issues with the rivets blocking the magwell but, from what I've heard, that's been resolved for the most part.
-
Arsenal AK Question and Where to Purchase in NJ
Howell Gun Works had one Arsenal in its rack a few months back when I bought my NPAP from them (I don't recall which Arsenal model it was though). It's probably gone by this point but you may want to give them a call to see if it's still there.
-
Best place to buy Wasr-10
Howell had a WASR in the case when I was there a few weeks ago. If I remember correctly, it was an older model (with the laminate stock, not the new hardwood)
-
Best place to buy Wasr-10
I don't think that you'll find a decently built Polish kit rifle in the same price range as a WASR. If you really want a WASR, then you're better off buying it through Atlantic Firearms (they do a quick inspection for canted sights, mag fit, and check the action) before they ship it to your FFL. You still need to do your own inspection when it arrives, but Atlantic is a very good company to deal with if you run into any issues that may cause you to want to exchange the rifle before completing the transfer Sent from my iPhone using Tapatalk
-
New Palmetto State Armory AK - Question about NJ Compliance
From what I've heard at a couple of gun shops, this gun is a "no go" for NJ due to the model stamping Sent from my iPhone using Tapatalk
-
Options for QD slings on Yugo AK
I've got a black nylon rear sling adapter that I'm using temporarily on my NPAP until I can attach a permanent swivel. It basically wraps around the buttstock with a fast release buckle. It's worked pretty well so far. I'll take a look at the rifle tonight to see if there's a brand/model marker on it and update this post
-
Kalashnikov USA Website is up
I just noticed this morning that Kalashnikov USA has its website up (no prices given for their AKs). I'm surprised that they only seem to be offering a "tacticool" version and no wood furniture rifles http://www.kalashnikov-usa.com/firearms