Everything posted by medved11
-
New Palmetto State Armory AK - Question about NJ Compliance
I've never heard of anyone ever running into that kind of trouble (I did a quick Google search and couldn't find anything). That being said, and as seemingly ridiculous as this law seems to be, I don't want to be the test pilot for that situation - especially with this rifle (I'm really not a fan of the Magpul furniture).
-
New Palmetto State Armory AK - Question about NJ Compliance
I wouldn't roll the dice for this particular rifle. I'm not a fan of the Magpul handguards and the price seems a bit high for what it is
-
New Palmetto State Armory AK - Question about NJ Compliance
If you look at the picture in post #33 in the link below, it looks like the model number is stamped as "PSAK47". http://www.calguns.net/calgunforum/showthread.php?t=1030180
-
New Palmetto State Armory AK - Question about NJ Compliance
Here's a link to the rifle on the Palmetto website: http://palmettostatearmory.com/index.php/ak-47/psa-ak47-moe.html I'll have to look at my browser's history to see where I found the picture of the serial number stamping
-
New Palmetto State Armory AK - Question about NJ Compliance
I was just looking at the new AK47 that Palmetto State Armory has just released and noticed in the pictures that the receiver is stamped "S/N AKxxxxxx" Does that stamping put the rifle outside of the rules for NJ, or is okay because it is not stamped "AK47"?
-
WASR-10 for $1,249.95?
While doing some web browsing this morning, I found this listing on GunBroker: http://www.gunbroker.com/Auction/ViewItem.aspx?Item=486143059 What am I missing here that would justify this price ($1249.95)? Is there something special about the serial number? No interest in buying this particular rifle, just curious about what would make someone think that they could sell what seems to be a basic WASR at an Arsenal level price
-
Polish AK from Atlantic - Opinions?
Thanks for the tips - I'll try to give you a call this afternoon. I'm definitely looking for another AK but I'm not 100% wedded to the idea of getting a WASR. I'd like to hear about other options that I'm not considering.
-
Polish AK from Atlantic - Opinions?
Thanks for the reminder about checking the "AK-47" stamping, I totally forgot about that "little" detail - I'll call Atlantic to verify. This shouldn't be an issue with the WASR, correct? I don't think that I've ever seen one that is stamped "AK-47"
-
Polish AK from Atlantic - Opinions?
In my continued effort to expand my AK collection (even though I swore in the beginning I was only going to get one just to check them out), I was looking at these two rifles on Atlantic Firearms webiste: https://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/polish-ak47-7-62x39mm-rifle-wood-detail.html?Itemid=0 https://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/petronov-armament-ak-47-7-62x39mm-rifle-with-wood-stock-set-detail.html?Itemid=0 Has anyone seen either one of these in person and can comment on the build quality? I started out this week thinking that I would just buy a WASR as a project gun (e.g., refinish the wood, replace the front grips, etc.); however, I saw these two online and now I'm wondering if it makes sense to spend a little bit more money if the build quality is better. Any thoughts or opinions would be appreciated.
-
White Lithium Grease vs. CLP?
That's sort of what I thought - I'm sticking with a CLP and Tetra grease combo for now
-
White Lithium Grease vs. CLP?
That video is pretty amazing. I'm obviously overthinking / over complicating this.
-
White Lithium Grease vs. CLP?
I was scrolling through some AK cleaning/maintenance videos today and I saw a few guys recommending the use of white lithium grease over CLP, Millitec, Remoil, etc. for lubing the bolt and bolt carrier. Has anyone here doing this? If so, do you see any better performance over the oil based products? What about rust prevention over the oil? I know the adage of if it rotates, oil it. If it slides, grease it. The bolt / bolt carrier do both, so I'm wondering which is better? If your using the white lithium grease, how much should you apply? Some of these guys put a seemingly excessive amount of grease on while others put just a thin film (which is what I've always thought was the proper way to do it. Any tips or advice is appreciated.
-
another npap stock thread
I was also concerned about the much talked about cheek slap when I took my NPAP out for the first time this weekend; however, before heading out, I happened on this video and took note of how he's got his cheek positioned on the stock. I did my best to get into the same position and I can honestly say that I got zero "slap" from the gun after firing 200+ rounds: I think that, just as the guy in the video says, is to bring the gun to your face and not your face to the gun.
-
NPAP - Which FCG Retainer Clip Should I Use?
Everything's fine so far - Thanks for the tips. I used a screw driver to slide the spring coil over a little and I could see that the fork was in the proper space between the receiver wall and the ridge on the pin. I then took a brass punch and tried to push the pins to see if they would come out under pressure but they're holding firm. The real test will be tomorrow when I take it to the range for the first time and put some rounds through it. I bought a Power Custom and Tapco plate as back-up but this one seems to be doing the job (I'll have to pick up two new AKs to install these plates into). Any thoughts on what I should look for as my next purchase? I'm going to pick up WASR soon to use as something that I can strip down and rebuild but I'd like to dip my toe into the upper middle range AKs as well. Let me know what you think.
-
NJ Compliant Metal AK Mags?
Thanks for all of the tips - RTSP is just up Route 10 from my office, so I'll stop by tonight on my way home.
-
NJ Compliant Metal AK Mags?
Does anyone have any leads as to where I can find NJ compliant metal AK mags? I've built up a comfortable supply of polymer mags (thanks to Midwest PX) but my web search for 10 or 15 round metal AK mags has been unsuccessful so far. Any info would be appreciated.
-
NPAP - Which FCG Retainer Clip Should I Use?
Luckily, the Krebs was given to me by a friend so it was a $0 venture for me. The fork on the Krebs looks much narrower than the other designs from what I can see on the web. I'll see what happens when I take the PAP to the range this weekend (fingers crossed)
-
NPAP - Which FCG Retainer Clip Should I Use?
Thanks - I was thinking the same thing last night (that the pins falling out when firing would be the best test to see if it's installed correctly). I'm going to leave this one alone for now and install the Tapco plate that I got from Amazon in the C39v2.
-
NPAP - Which FCG Retainer Clip Should I Use?
-
NPAP - Which FCG Retainer Clip Should I Use?
Okay - I think that I've got the picture attaching issue resolved. Here are the two best shots that I could take at the moment. The plate looks like it is tight up against the receiver wall but I'm concerned that the front fork may not be fully engaged. Please let me know what you think
-
NPAP - Which FCG Retainer Clip Should I Use?
Is there a secret to posting pictures? My photos are less that 500 KB but I keep getting the "file to big" error.
-
NPAP - Which FCG Retainer Clip Should I Use?
I picked up an NPAP yesterday and I want to replace the shepards hook with a retainer clip. I tried inserting a Krebs clip that a friend gave me but I couldn't get it to give me a positive "click" when I pushed the front fork of the clip into the pin. I was able to get the safety lever reinstalled, but I'm not 100% convinced that the clip is properly installed. Is there a different clip (Tapco?) that someone here has successfully installed in an NPAP? Or, is there a good way to test that the Krebs plate that I put in is doing its job correctly?
-
Steel case ammo?
I've used the following brass cased 7.62x39 ammo without issue: 1. Hornady 2. Geco 3. American Eagle 4. Sellier & Bellot I bought a couple boxes of each when I couldn't easily find steel case ammo online. I can't say that any of them were worth the extra cost of the brass casing
-
Range 14 age restriction
There's nothing here that mentions a minimum age and I've seen some pretty young kids there from time-to-time http://www.range-14.com/rules.html I've seen some pretty young kids there from time to time. I'm guessing there's no issue as long as everyone is following the basic safety rules.
-
Second AK - What to Buy?
Thanks for the tip - I saw the post about the SAR on HGW's Facebook page - I have a feeling that it's going to be gone before I get the chance to head down that way. I haven't read much about the Maadi's or MAK90s. I'll have to do some research.