Everything posted by medved11
-
painting polymer ak mags
I've rattlecanned a bunch of polymer mags (magpul and Hexmag) with Krylon/Rustoleum and found that spraying them first with an adhesion promoter (e.g., a can of the Dupli-Color stuff that you can get a Pep Boys) helps to make the paint stick better and last longer. It seems to work best if you do very light coats and flash each one with a hair dryer or heat gun (set on low).
-
Original Tavor (upgraded) vs New X95
The "sand tornado" test is my personal favorite Sent from my iPhone using Tapatalk
-
cleaning corrosive ammo
Edit: I failed my reading comprehension test. I thought that the OP was talking about cleaning up after using corrosive ammo A mixture of Ballistol and water (1:7) is what a friend uses to clean his combloc rifles after shooting corrosive ammo. He explained to me that the water dissolves the salts and the Ballistol coats/protects the metal until he can dry and properly lubricate everything. Hot water alone does the "real" work and the. Ballistol just gives him a little peace of mind during the cleaning process Sent from my iPhone using Tapatalk
-
Original Tavor (upgraded) vs New X95
The overall length between the two should be the same (presuming that they are both the 16" models). Maybe the Tavor was the "out of the box" NJ compliant model with an 18" barrel and the long factory pinned brake while the x95 may have been a 16" barrel with a "normal" length brake? Sent from my iPhone using Tapatalk
-
Any Vepr dealers in NJ?
Looks nice - Just curious, are you going to leave the thumbhole stock on or replace it?
-
AR Slings
My understanding is that single point slings are a really intended for easy vehicle entry/exit and not "traditional" sling use for extended walking Sent from my iPhone using Tapatalk
-
AR Slings
I've got Proctor slings on a couple of my guns. The main attraction for me is the minimalist design and the fact that I didn't need to be locked into any specific mounting hardware. After using them for a couple of years, I've decided that (for me) they work best on the AK platform guns since I'm a lefty and it allows me to sling them up so that the charging handle isn't poking me in the gut. My main complaint about using them on my AR is that, short of tying it in a knot, I can't get the front piece of paracord to stay tight even with the cinch that attached. Sent from my iPhone using Tapatalk
- Howell Gun Works "Thumbs Up"
-
To Tavor or Not to Tavor
The x95 is arguably more ergonomic but I like the angles on the SAR buttstock better from an purely aesthetic POV. The only other advantage of the SAR design for a lefty is that the charging handle is a little father forward so it does dig into you when the rifle is slung across your chest Sent from my iPhone using Tapatalk
-
Saiga, firing pin retainer pin contacts ejector
Those 7.62x39 Saiga bolt head repair kits at K-VAR have been out of stock for a long time. http://www.k-var.com/shop/AK-178RK.html
-
To Tavor or Not to Tavor
I walked right into that one - I blame lack of coffee
-
To Tavor or Not to Tavor
The riser fixed my issue. I can now close my eyes, rest my cheek on the stock, and when I open them I've got a "perfect" sight picture through the scope reticle. It seems like all I needed was that extra 1/2" of height
-
To Tavor or Not to Tavor
It's a stock image but here you go...
-
To Tavor or Not to Tavor
Yeah - it was an impulse buy fueled by a little bit of a caffeine overdose. Fingers crossed that it solves the issue. Sent from my iPhone using Tapatalk
-
To Tavor or Not to Tavor
Thanks - You may be right about my cheek position on the stock. I'll have to pay attention to that. I was just looking at the MI website again and saw that they sell a $50 riser. I just ordered that to give it a try and see if it helps fix the problem (along with better positioning on the stock). I missed this somehow when I was on their site earlier Sent from my iPhone using Tapatalk
-
To Tavor or Not to Tavor
Has anyone tried out the Midwest Industries Gator or the Gearhead Works Razorback (full length) rail on their Tavor? I'm looking to raise my *scope up a little (I feel like I'm squishing my face into the stock too much right now) and I'm trying to decide between these two options. I'm leaning towards the MI model but I was hoping for some feedback before I drop the money on either one *my current set up is a Vortex Strike Eagle on a American Defense Recon rmount
-
Pictures of AK's
Regarding the intermediate stock... I'm 5'8" and really couldn't get completely comfortable with that stock on my SAM. I replaced it awhile back with a Warsaw length Polish laminate stock and its now the perfect LOP (for me at least) Sent from my iPhone using Tapatalk
-
Pictures of AK's
Check out Nick over at http://www.badelementco.com for custom 15/30 magazines
-
Anyone here have an iwi x95, or handled one?
I'm not an expert, but I believe that I saw in a review that the X95 trigger pack is backwards compatible with the SAR21 with the exception of the first generation Tavor
-
Looking for a fixed triangle AKM stock
I checked a couple of places last night (APEX, Circle 10 AK) and can only find the side-fold adaptor for the triangle stock. I shot an email out to a friend who is an AK junkie. He may know where to find a fixed adapter if one exists.
-
Looking for a fixed triangle AKM stock
I think that I saw a fixed adapter for that stock somewhere before. I'll check my links and post here if I can find it Sent from my iPhone using Tapatalk
-
Looking for a fixed triangle AKM stock
I saw this last night if you want to do the work to pin it (used Russian sidefolder with 4.5mm pins): http://www.akfiles.com/forums/showthread.php?t=272305&highlight=triangle Manticore Arms makes a fixed triangle but it's been out of stock for awhile on their site: https://www.manticorearms.com/triangle-stock.html
-
Tavor X95 - Opinions from Left Handed Shooters Needed
I'm looking for some feedback from any left handed shooters that are using a LH configured Tavor X95. I've got an opportunity to pick up a used LH configured X95 but wanted to hear from other left handed shooters in terms of just how friendly this rifle is to southpaws before I drop the money. I've shouldered RH configured models in the store and I like the way it feels but I haven't had a chance to actually shoot one.
-
I want a new AK, but havent decided on what
Yeah, I understand. I have a love/hate relationship with Magpul AK stuff. I love Romanian and Russian laminate sets but The Magpul stuff makes it easier to mount grips and lights. I try to keep at least some wood accents on my guns where I can Sent from my iPhone using Tapatalk
-
I want a new AK, but havent decided on what
Here's my WASR with the Romanian laminate stock and the Magpul AK pistol grip and front handguard (it's still got the blonde gas tube guard - that'll be replaced with the Romanian laminate soon). I've got a Primary Arms micro red dot on a RS Regulate mount that's not in the picture along with a Russian sling (both taken off the gun to make cleaning easier Sent from my iPhone using Tapatalk