Everything posted by Pizza Bob
-
Gepard GM6
Boy, he sure can work the barrel of that Crosman airgun quickly. I didn't even see his hand go up to cock it. Simply amazing.
-
whats the deal with not being able to pick up your brass
STOCKPILE! Honestly, if I hadn't been able to get and shoot occasionally, I would have gone nuts long ago. You have to do something you enjoy to offset negativity created by being unemployed. I should know, I'm a pro at being unemployed by now. Adios, Pizza Bob
-
Hk P7 PSP prices
Maks: I think there was a recent importation of ex-German police guns. There is a dealer on SigForum who was getting $699 for the blue/black guns and $749 for the nickel ones (don't know if he still has some or not). These were primo condition and included 2 mags and the cleaning tools in the original plastic case. The one you found sounds like a darn good price. They are very interesting guns. I had a chance to shoot one, not too long ago, and I enjoyed it enough that I'd consider one of these (if I had any money ). It's a heel mag release I could live with since you push it forward (toward the muzzle) to release the mag - much easier to operate than those you pull back - especially nice if you're left-handed. Adios, Pizza Bob
-
Modular Indoor Shooting Range Link - Can't Find it
Is this what you are talking about? http://www.ais-sim.c..._quickrange.htm I Googled: modular, "shooting range", "shipping container" Good luck. Adios, Pizza Bob
-
Highly Trained Elite Fed Fogets Rule #3
Works for me - I've got several rifles that need to be sighted-in.
-
Best price on a SPRINGFIELD PX9151LP 45 1911A1 LOADED MODEL SS PKG
...for now. Come spring it will be a different story.
-
Highly Trained Elite Fed Fogets Rule #3
Sigs do not have an external safety and can be prone to the same type of discharge - although with a 10# - 11# DA initial pull it would be a lot tougher than with a Glock. I've heard of this same type of discharge occuring when a shirt tail or draw string (from the bottom of a jacket) gets lodged within the trigger guard. I wasn't trying to demean your glorious Glock, or exonerate the actor in this case - just pointing out that everyone seemed to want to rush to judgement without any consideration that there may be more to the incident.. Adios, Pizza Bob
-
Highly Trained Elite Fed Fogets Rule #3
Glock Holster Safety Recall http://www.cpsc.gov/cpscpub/prerel/prhtml05/05175.html CPSC, Michaels of Oregon Announce Recall of Handgun Holsters Released: May 17, 2005 WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission announces the following recall in voluntary cooperation with the firm below. Consumers should stop using recalled products immediately unless otherwise instructed. Name of Product: Kydex Belt Holsters for Glock model handguns Units: About 8,000 Manufacturer: Michaels of Oregon, of Oregon City, Ore. Hazard: The holster’s retention strap can move out of position and could cause a handgun to unexpectedly discharge while being re-holstered, posing a serious injury risk to consumers. Incidents/Injuries: The firm has received three reports of unexpected discharges. In one incident, a law enforcement officer was shot in the leg while re-holstering his firearm. Description: The recall includes Kydex Belt and Tactical Holsters with thumb break fits for Glock model handguns. The holsters are rigid and are made of black Kydex and come with tension screws for a proper fit. The words, “Uncle Mike’s by Michaels of Oregon” are printed on the back of the holster. The recall involves sizes 12, 21, and 25, which is printed on the inside of the holster between the two screws securing the holster to the belt slide. Sold through: Uncle Mike’s and Uncle Mike’s Law Enforcement catalogs and at sporting goods stores and gun supply stores nationwide from January 2002 through October 2002 for between $25 and $50. Manufactured in: United States Remedy: Consumers who have purchased a Kydex Holster with a Thumb break for a Glock Handgun should stop using it immediately and contact Michaels of Oregon for a replacement retention strap free of charge. Consumer Contact: Call Michaels of Oregon at (800) 471-4999 between 7:30 a.m. and 4:30 p.m. PT Monday through Friday, or visit their Web site at www.michaeloforegon.com Don't mess with the Pizza One. Adios, Pizza Bob
-
Highly Trained Elite Fed Fogets Rule #3
Don't be too sure. This type of discharge (call it accidental or negligent) often occurs with holsters that have a retention thumb snap. When reholstering the strap gets caught in the trigger guard in front of the trigger. As the gun is pushed into the holster, the strap forces the trigger to the rear (while conveniently disengaging the trigger safety), firing the gun through the holster into the hip or anything else in close proximity. He should thank his lucky stars that he wasn't carrying appendix. Adios, Pizza Bob
-
What is your technical ability?
I'm with Frank. Great at theory, lacking in execution. Adios, Pizza Bob
-
Philly Gun Show - Feb 4-5
OK, I went to the show this AM, and as I said in my initial post, they are in a rebuilding mode. It was much better this time (this being the second show since the 2 year construction hiatus). Top Hat was there, as was Ed's Guns from Tamaqua (he has tons of magazines), and the guy with all the reloading components was there (my buddy left $260 poorer). It's a good thing I have no money, I would have come home $800 poorer - there was a very nice Colt Diamondback .38 Spl, 4" barrel, for that amount of money (that's a great price on a Diamondback). Some othere interesting guns: M1 Garand in .308 with a beautiful Tiger Maple stock ($1500), a Ruger #1 African in .375 H&H ($899). A S&W IPSC 10th anniversary (1976 - 1986) - I forget if this was a 645 or a 745. This show is on its way back - not there yet, but definitely worthwhile if you are local or looking for reloading supplies. Adios, Pizza Bob
-
Philly Gun Show - Feb 4-5
This used to be a good show, but they are in a rebuilding mode. This is only the second show after a two year hiatus due to the armory being renovated. It was originally only supposed to take six months or so, but like any government project - need I say more. Once it was completed, they couldn't get the Philly fire marshal to sign off on it - led to two years with no shows there. A lot of his vendors went elsewhere. It was just OK last time, hoping there will be a better showing this time, but it's close, so I go anyway. Adios, Pizza Bob
-
Bob Munden - Stan Lee's Super Human
Some, but Ed still owns quite a few, and when you consider the equipment of the era, it is even more amazing. Ed's most famous stunt was 5 shots on a playing card in 2/5ths of a second. But my favorite was the aerial shot with the washers. He was challenged to throw a washer in the air and shoot it. He threw one up and shot and seemingly missed. His challenger laughed and Ed insisted he had shot the washer, but the bullet had passed through the center. Ed used .38's for all his trick shooting and these washers had a .500" hole in them. He said he'd prove it to the guy, so he took a piece of tape and covered the hole. Threw it up, shot - again it appeared as though he'd missed. His challenger was razzing him until they picked-up the washer and found a .357" hole through the tape covering the .500" hole. Not sure if it is still in print, but for those of you that like stuff like this, Ed McGivern wrote a book called Fast & Fancy Revolver Shooting, worth the read. Adios, Pizza Bob
- How's the weather?
-
Bob Munden - Stan Lee's Super Human
Any of you people ever heard of Ed McGivern?
-
S&W Body Guard 380
Not the first ones off the line. I had a 4" 25-5. Chamber & throat dimensions were pre-war spec, while barrel & forcing cone were post-war spec. Would pattern about 10" at 15 yds and keyhole 2 or 3 out of 5. Went back to Smith for repair, but I was never happy with it - got stolen in 1987 - the one gun they got that I wasn't sad to see go. Adios, Pizza Bob
-
S&W Body Guard 380
Too soon to tell. Any report from a gun rag has to be taken with a grain of salt, as they don't want to risk losing advertising dollars. Likewise, be careful of postings on the Internet - one person with a problem can unfairly condemn the whole line, when in actuality it may have been just that one gun. While it is nice to have newest first, I would just counsel "wait and see" (not that I follow my own advice - but I have regretted not doing so, in the past - ask me about a model 25-5). Adios, Pizza Bob
-
Reloading
I would suggest checking with the bullet manufacturer for load data. It presents some interesting problems with its light weight but long OAL. Load data for that light a bullet in a conventional reloading manual, will be for a conventional bullet of much smaller length. Using that data for your frangible - given its length - could create an overpressure situation. Adios, Pizza Bob
-
Might wanna fill up
Paul: I doubt that far. You just need to find somebody that buys oil on the spot market. I have no auto-fill, no service contract with these folks - just oil and a minimum purchase amount. I (we) get around the minimum by buying oil in conjunction with my neighbor. Whenever one of us needs oil, he calls the other and we always fill up together - makes it worthwhile for the trip up here, I'll send you a PM with contact info, but I doubt they'll travel all the way down there - although the quantity you buy at one time may sway their decision. Adios, Pizza Bob
-
Might wanna fill up
Just filled up with heating oil - $3.099/gal
-
Making a NJ-illegal AR NJ-legal
The OP was talking about a complete firearm. If he wants to bring it in, in pieces - upper first, modify, then go get the lower, that would work.
-
Saiga-12 IMPORTANT
This one maybe? http://www.atf.gov/publications/firearms/012611-study-on-importality-of-certain-shotguns.pdf
-
Making a NJ-illegal AR NJ-legal
since it's a long arm, you can do the modifications in PA and then go to a PA FFL for the transfer. The PA FFL may be a bit skittish if they are unfamiliar with the NJ AWB. Either way works - FFL in PA or NJ, but I think, just to be safe, the mods should be made in PA, unless you intend to ship the gun directly to the NJ FFL - in otherwords, don't hand carry an unmodified AR into NJ. Hope this didn't confuse the issue. Adios, Pizza Bob
-
1873 Springfield Trapdoor "Carbine"
I know little about Trapdoors, but I am wondering if the same thing exists with them as it does with Krags - that is, the carbines are much rarer, therefore much more valuable. There are an awful lot of counterfeit carbines out there, made from cutdown rifles. Could this be the case with your Trapdoor. Dixie Gunworks once tried to corner the market on Trapdoors. You used to be able to buy them for about $15 bucks and Dixie bought every one that came available and openly solicited for more. I remember pictures of trapdoors, stacked on pallets like cordwood, in Dixie's warehouse. They may be authorities. In the meantime I'll query my friend, who is far more Trapdoor knowledgeable than I. Pictures would help. Adios, Pizza Bob
-
NJGF dinner
Restaurant in Central Jersey that could accommodate a large dinner or lunch = Mastori's in Bordentown