Everything posted by Pizza Bob
-
contacting AGs office to speed up FID process?
Mmmmmm, not exactly. The ruling simply said that, in the interest of public safety, the 30 day clock did not start ticking until all material for the background investigation was in hand. The usual hold-up is the mental health check as most of those records cannot be searched electronically. Also, since there is no transparency in the process, who's to say when the PD has all the records back that they need?
-
IDPA Classifier Match / Easton / August 25, 2013
To get into a "fun competitive shooting sport" entails responsibility. While any good lawyer can beat a waiver of liability, the fact that this MD went the extra mile to vet the competitors shows he did his due diligence. When the governing body made the MD solely liable, it only makes sense to do all you can to protect yourself or get out of the game. In their zeal to protect themselves (IDPA), I wonder if they considered the unintended consequences this would have on participation in the sport. As for expense. if you look around, you can find NRA courses that are inexpensive. The MD and co-MD are considering putting together an NRA course combined with the usual IDPA safety briefing, so that all issues are satisfied. Given the rules change, what this MD is doing is nothing but prudent. Adios, Pizza Bob
-
Worst movies you've paid to see.
Long time ago - GF just had to see "The English Patient". Still gives me leverage today.
-
IDPA Classifier Match / Easton / August 25, 2013
Title pretty much says it all. Easton usually incorporates their Classifiers into a regular match. They will break the classifier into, probably, nine smaller stages and then add three scenario-type stages. Easton now has new safety requirement for new shooters. New shooters must provide proof of attendance at an NRA Firearm Safety Course or that they hold a current classification in IDPA – USPSA – IPSC or ICORE. I would suggest you contact the match director if you are new. Information about Easton Matches can be found here... http://www.nepaidpascores.net/efga/efga_club_master.html See you there. Adios, Pizza Bob
-
45 colt keyhole one out of about every 10 rounds.
IIRC, Hornady lead bullets do not have crimp grooves. The bearing surface of the bullet is knurled and the dry lubricant is applied. The lead is very soft and a roll crimp will "bite" into the bearing surface. I, too am inclined to go with expanding/belling/crimping being the problem. At the velocity you are driving them, are you getting any leading? Adios, Pizza Bob
-
Ok, so how many of you own a 50-cal rifle?
The way the bill was originally written it would have had that effect. They attempted to fix it - and I believe that shotguns & muzzleloaders were specifically exempted and they attempted to narrow the .50 caliber ban by using lb-ft of muzzle energy as a determining factor, instead of just specifying .50 BMG. IIRC (and it has been a while since I looked at this in its final form), even with a specified ME, the wording was so convoluted it could still be interpreted to cover any .50 caliber cartridge. Maybe that has been fixed, but that is how I remember the last version I looked at. Adios, Pizza Bob
-
holding single action handgun
A two-handed grip does not prevent the gun from rolling, unless you are "tea-cupping" it - which is an improper grip anyway. I'm with Chris in that I prefer the Bisley profile grip. If you have a regular S/A, look for aftermarket grips. With Rugers, Pachmayr grips have a rounded corner on the heel of the gun that makes it more comfortable to shoot. Adios, Pizza Bob
-
Easton Game & Fish (EFGA) This Sunday
Dave, thanks for that. I contacted Ken and he confirmed that the shooter in question circled the wrong division - should have been ESP. By that point everything had been sent out. No harm, no foul - I was just a little bummed as this was probably a personal best for me. I want to make a correction to my statements about the new shooter policy at several match sites. The match director told me that he has no intention of doing away with the safety briefings. The rest is valid. If you are a new shooter, or if you are bringing a new shooter with you, it is always good to contact the MD prior to attending. The MD I spoke with told me he has a standard information packet he e-mails to new shooters that contact him. Adios, Pizza Bob
-
Easton Game & Fish (EFGA) This Sunday
Some kudos are deserved for a couple board members who did well at this match. Zack (Sgt Toadette) came away with "Most Accurate" honors being only 16 points (8 seconds) down for the entire match. He shot clean through his first four consecutive stages plus one more, for a total of 5 out of 8 stages down zero. I also want to give kudos to Kevin (Stranger), for having the balls for shooting a large IDPA match, which unfortunately for him, had no briefing prior to the match, and to shoot a revolver - WOW! Considering he had little advance knowledge of all the idiosyncratic rules of the game, he did astoundingly well. His improvement, as we progressed through the stages, was marked and clear to even a novice's eye. I hope that he sticks with it. I'd like to know who snuck in the unknown revolver shooter into ESR division, that beat me by 3.74 seconds overall. Really have nobody to blame but myself - missed an easy popper, not once but three times, necessitating a reload where otherwise there would have been none - that alone killed me - otherwise I was third most accurate at 30 points (15 seconds) down for the match. Also glad that the rain, for the most part waited until we were on our last stage - and thanks to Zack for also being the umbrella bearer and helping teardown while I packed the car for a quick getaway. The next match up may be a bit far for most board members at Guthsville, PA (just north of Allentown, PA) next Sunday (8/4) - although it is a straight shot across I-78. Guthsville is usually six stages, all outdoors. The weekend after that is Phillipsburg, NJ on Saturday 8/10. Usually 8 stages - four indoors (bring your flashlights) and four outdoors. One word about the new IDPA rules. Even though they do not actually go into effect until 10/01/2013, some clubs are implementing them now - at least the procedural changes. One of those rule changes categorically states that the MD is personally responsible for all participant and spectator safety. This has led the MD for P-burg, Easton & Hellertown to institute a new policy for new shooters. Any new shooters must either show a proof of rating in USPSA, ICORE, PPC or that they have completed an NRA safety course - I believe that "First Steps" will be acceptable as it is the safety aspect they are concerned about - bring your USPSA, ICORE or PPC card or the NRA certificate issued upon course completion. This will also preclude any safety briefing - which often times included some rules clarification/explanation - so it would behoove any new shooters to familiarize themselves with the rules before attending a match. If you join IDPA, there is a CD given as part of the membership package, that I am told is excellent in going over the rules and the range terms etc. Otherwise, you could shoot one or more IDPA matches where a safety briefing is included and they require none of the above documentation (i.e. Somerset, Guthsville - at least for now). Have fun and be safe. Adios, Pizza Bob
-
Got a scope today
Aside from the BDC, the difference between a scope designed for a rimfire and one for a centerfire, is the parallax setting.
-
Easton Game & Fish (EFGA) This Sunday
All outdoors. Possibility of cancellation is it is raining hard prior to the start. Once it has started, they would evaluate and decide. Adios, Pizza Bob
-
Easton Game & Fish (EFGA) This Sunday
Shoot the revolver. Master a D/A revolver and everything else is easy. There are usually a couple of revolver shooters at Easton, however, there is a regional ICORE match at Ontelaunee this weekend - but that may only attract the heavy hitters, which means little fish, like me, stand a better chance at Easton. LOL. Adios, Pizza Bob
-
General Questions about Rifle Reloading
Chris: While I have reloaded for a lot of rifles and rifle cartridges, I have never reloaded for use in a semi-auto rifle. I have been told - and I'm sure that a bunch of people on here will probably disagree - that for a S/A you should use small-base dies to insure positive chambering. Aside from that, I can't offer much. Good luck and congrats on the soon to be new addition. Adios, Pizza Bob
-
Easton Game & Fish (EFGA) This Sunday
Comp III's are fine. You are allowed three speed loaders on your belt and a fully charged gun - 24 rounds total to start the COF. If you weak-hand reload, then all three are normally carried on the weak side behind the body midpoint (9 o'clock if you are right-handed, 3 o'clock if left-handed). If you strong-hand reload, then two are usually carried on the strong side in front of the holster (exception to the body mid-line rule) and must be no more than an inch ahead of the holster, and the third, behind the holster on the strong side. Adios, Bob
-
Easton Game & Fish (EFGA) This Sunday
Depends on the stages and number of shooters. 4:30 - 5:00 would be a good guess.
-
Easton Game & Fish (EFGA) This Sunday
I don't compete with a semi-auto. What do you have?
-
Easton Game & Fish (EFGA) This Sunday
http://www.nepaidpascores.net/efga/efga_club_master.html While this page says Saturday, they are on Sunday this year. Changed due to a MD's work conflict. See you there.
-
want to start competition shooting
If you shoot the H&K better, then shoot that. You can shoot that in CDP division and thus not handicap yourself further by competing against a bunch of 9mm's. Capacity in CDP is limited to 8+1. There is a match at Easton on Sunday. It may be a bit ambitious for a beginner, but we all had to start somewhere and you will find yourself surrounded by people willing to help you out. Here is a listing of IDPA, USPSA and Steel matches in the general area... http://www.nepaidpascores.net/cgi-bin/shooting_schedule.pl?req=all If you are going to Easton, contact the Match Director and let him know so that he can tell you about the newbie safety briefing. Practically everyone that I have started down this path, that wanted to go and just observe the first time, regretted that they didn't participate. As Geoff suggests, do some pre-match research to gain some preliminary knowledge (my sticky in the competition section is not a bad place to start, if I do say so myself) and then go and shoot a match. Go slow and concentrate on safety, number one, and accuracy, number two. Speed will come of its own accord. Hope to see you there this weekend. Adios, Pizza Bob
-
Easton Game & Fish (EFGA) This Sunday
On Sunday you will be able to shoot at the pistol range, but the all-purpose pit and rifle range will be closed due to the monthly IDPA match. Of course you could always sign-up (at the match - no pre-registration required) and shoot with us. Adios, Pizza Bob
-
Revolver Roll Call
Have you seen the PSI sight? Looks like the one Smith uses on the Competition models. I'll send you a link in the morning. Adios, Pizza Bob
-
Questions on: Inheriting a rifle, FID, "Evil Features" on bolt action
All right, maybe you had better pay attention to the black helicopters
-
Revolver Roll Call
Alec: How are you going to change the front sight? That appears to be an integral sight/base/rib - not a pinned blade. Are you going to machine off the sight/base & rib and use Wiegand's DX sight base? Also, what width blade do you use? You still have young (good) eyes - I have found that, being an old codger, I like a .100" wide blade with the stock rear sight. If the front is the standard .125", then I prefer a .140" notch in the rear sight blade (Wiegand makes a rear sight blade for that, too). I like the extra light showing around the front sight that those set-ups allow me. Adios, Pizza Bob
-
If You can Stand One More GZ / TM Post, This one deserves to be seen
Excellent article Geoff. Thanks.
-
Questions on: Inheriting a rifle, FID, "Evil Features" on bolt action
It never hurts to be able to establish legitimate ownership. You are correct in your thoughts on transport - spelled out in the statute. IMHO a mag that is modified so that it only works in your B/A rifle would be fine. Keep in mind that you may have to prove that in court. Yes, you need a FPID to purchase handgun ammo within NJ You should have no problem purchasing rifle ammo or accessories without a FPID - but stranger things have happened. You are becoming a victim of your own paranoid overthinking. Relax and take a deep breath - pay no attention to those black helicopters overhead. Good luck with your project gun. Adios, Pizza Bob
-
If You can Stand One More GZ / TM Post, This one deserves to be seen
Very nicely presented, wrapping it all up in one neat package - worth watching... http://www.youtube.com/watch?v=Ebu6Yvzs4Ls&feature=youtu.be Adios, Pizza Bob