Everything posted by Pew Pew Plates
-
How's your 10/22?
I cant get my 10/22 to jam even if I try. When I first got it I ran 1,050 rounds of federal bulk pack without even cleaning out the preservative oil first. Not one jam. I felt terrible so I cleaned it then LOL. I continue to shoot bulk pack problem free and I grab all the discarded ammo from the misfire can at the range and I shoot that too as freebee plinking ammo and THAT cycles. Sometimes you get a noticably underpowered round and it still cycles, in slow motion. lol... It just doesnt stop shooting! You must have a lemon
-
Flash Hiders in NJ??
Flash hiders are not illegal in NJ. They are only illegal if they are accompanied by 1+ more evil features on a semi automatic rifle with a detachable magazine. You can have an unpinned flash hider on your AR if it didnt somehow have the pistol grip, or if it had a fixed magazine. For example, the springfield M1A is allowed to have a flash hider because it has 0 other features.
-
Are you prepared?
If time compressed played a major role, locking your slide back on a pistol will wear the recoil spring out in 40-50 minutes. Think about it, its about 1/1200th of a second to cycle, so 50,000 rounds between spring changes....thats something like 42 minutes of compression. I can assure you that locking the slide back on your pistol for 42 minutes will not wear it out. It is compressing/decompressing. Same with mag springs.
-
Whats wrong with this photo?
No, no. I think you should be able to do whatever you want. However, If I was going to teach bike safety, I would teach kids to wear helmets, especially if I was the group (the govt) that forces you to do so. It would be like going to a guns for hire course and they let you all shoot with no hearing protection and sweep each other. I just think its super ironic thats all
-
Whats wrong with this photo?
Helmet....isnt that the #1 safety rule? #2 wrong thing is that he isnt riding like this
-
Whats wrong with this photo?
Took a screenshot of mycentraljersey.com...
-
Bug Out Motorcycle
You need that lol
-
Local custom gun refinishing
You dont need to go through an FFL to ship your own gun out somewhere and to recieve it back as long as its going TO an FFL. It is not transfering ownership.
-
Best Shotgun Ammo for Home Defense
00 is the best stuff. Limiting penetration is a good thing, but to an extent. If you get a round that cant make it through a couple sheets of drywall how could it possibly go 12" into a person and stop a threat? 00 buck still penetrates less than handgun rounds
-
Ideas for Smith&Wesson
...and for the guys who say a pump action will scare people away with the sound... they obviously havent heard an AK design charging
-
M1 GARAND problem
Worn cartridge clip detents. Weak clip latch spring. Worn clip latch. Bent follower rod or worn follower rod forks. Worn follower arm. Worn or deformed operating rod catch or bullet guide. Follower rod rubs on operating rod catch. Those are possibilities.
-
Best Shotgun Ammo for Home Defense
Bird shot...dick cheney....friends not dead....'nuff said
-
Henry lever action
remove the sights instead of heightening your scope and keep it as low as possible. You will thank me when you go from 40 to 50 yards and your POI doesnt shift by a foot lol
-
rem 700 or weatherby vanguard
yeah but you can reload it for less than half the price and reloads properly done are much more accurate because they are tailored to your rifle. Also, these arent rifles you sit and blast away 200 rounds with so ammunition cost isnt terribly important. I shoot 20 rounds per range session. Savings would be like $2 if it was .223....not worth it.
-
rem 700 or weatherby vanguard
700. Very common, a wealth of info and upgrades out there. .308>.223 You wont be reloading the same ammo between your AR and 700. Even disregarding the whole 5.56 vs .223 brass issue, you will have to full length resize your AR brass and you will want to neck size only your 700 brass. Also you will have different seating depths between the two rifles and they both will prefer different loads. It will be almost like reloading 2 different calibers, anyways. This is why you may as well just go big or go home and get the .308, more range, more power. I have a 700 in .308 and I love it and you are welcome to try it sometime in bridgewater Second pic is 5 rounds at 100 yards. .118" CTC
-
Rudeness at CMO
Shame on you if you dont share, look out for fellow forum members and not the bad business and tell the story.
-
Real Black
Efingers, but its around $30/lb for goex and I hate that place
-
casting questions
Why do you guys always say boolits? AAARRRGH! lol
-
Ported Chokes
Ports do nothing to strip the wad. If they do, they are made TERRIBLY wrong. You can buy special chokes that hold back the wad...but they are a gimmick. You testing a ported vs non ported barrel will be 2 different barrels. Every barrel/gun/choke/load combo patterns differently. For your test to be valid you will need to pattern a non ported barrel, send out the barrel to get ported and have it ported and nothing else done to it, then pattern it again. And what do you mean impact the shot...? The wad is to hold it all together. This is why fiber to plastic wads was a huge advancement and reduced the amount of choking needed. You WANT the wad... "If the wad restraining theory was correct and given the fact that most barrel porting is positioned several inches behind the choke area, we can assume that the shot column would move ahead of the wad and make contact with the internal wall of the barrel thus resulting in some form of bore-scrub. In the case of lead shot we would see clear evidence of increased leading in the barrel or in the case of non-deformable materials such as steel we would see longitudinal abrasive marks in the barrel. Again, I’ve seen no evidence of this. Further to this, I’m not sure what barrel manufacturer would openly advocate such a system."
-
You might be a mall ninja
Ray, you left yourself wide open
-
anyone seen this?
Well ray, you know what they always say... opposites attract
-
NJ legal?
sent him an email. From me: "Do you happen to have the public records from the case you just did with the “adjustable” stock? Theres discussion on the message boards and if I could post them, that would be awesome." From him: "Glenn, I do not. The decision is only valid in Cumberland Co. if the State decides to not appeal. Also, the AG can give an expaned definition of "telescoping" that would kill the peoples (jury) decision that the law was vague or whatever their reasoning was. It was a jury nullification of that portion of the law. Very interesting on what the people had to say about the law. I seem to be the prosecution's worst enemy lately. They have had it one sided for years and then I come along and give a balanced opposing viewpoint and their case falls apart." He gave me permission to copy the email
-
Ported Chokes
Ported shotgun barrels/chokes are great for making you practice cleaning. You need pressure to make porting work, pressure exiting the ports. This is because the high volume of high pressure gas being redirected up will recoil the gun down and counteract flip. OK, so lets think here.... Shotguns have long barrels and use pistol powders. What are pistol powders? They are powders optimized for >5" barrels, powders that for the most part burn up in the first 5" or so of the barrel. After even the first 18" or so of barrel, there is virtually no pressure left by the time the wad passes the ports. If you think im wrong, put some masking tape over your ports and see if they blow off. They wont... and that means there is nothing significant flowing out of them. Just dirt and crap to clean out with Q tips.
-
anyone seen this?
Why must you combat everything I say? I said right there I think its fine. I was simply nitpicking against the common argument used to defend rounds, the "I'm sure you wouldnt want to get shot with it" argument.
-
Pictures of AK's
Wow, you are taking this very personally lol. I dont own an updated AK because the goals for my firearm collection are not %100 SHTF or anything. I own guns because I like them, I own guns because I appreciate their historical value, I own some guns just because I can. This is why I will pay extra for a milled reciever AK and get no benifit in return other than knowing that I have a type 3 milled reciever AK which was the last and best milled reciever made before Izhevsk figgured out a way to mass produce the stamped AKM. While you worry about rails and such on an AK, I worry about other things, like how the lightening cuts on my milled are done with end mills vs the horizontal key cutters that were originally used(which makes me sad ). While I make funny comments about removing rails etc, it is because to me it would be like buying a springfield '03 and putting a tri-rail on it. There is historical collectability in certain AK types and putting rails on them is icky. And if you read up on the history of it, you too will realize how historical this arm really is and how rifles like the "super awesome" M14 (dont get me wrong, they are awesome, the bureaucracy is retarded though)are dinosaurs that demonstrate the stupidity and stubborness of western arms technology. Oh, and as a footnote: Yes, a properly set up AK with rails and tacticool stuff is "better". But its not original. An m1 garand with an acog is "better", too..... Plus, I think that the "art" of shooting iron sights is lost. It seems like nobody uses them anymore or can REALLY shoot well with them. This also contributes to my rejection of optics on an AK. This is why I dont own an updated AK. I wont own one if I dont want one, theres no reason to. SHTF? I'm great with irons because I practice them. I also dont get why you think I should own everything that I speak against. You have told me I need to own taurus, ruger, and now a "modern" AK. Why do I "need" to own stuff I dont want? I dont ever ask you why you dont own something in particular. If you want want a soviet gun, thats fine, its your choice.