Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

medved11

Members
  • Joined

  • Last visited

Everything posted by medved11

  1. Nice! - This is the next one on my list! I'm going to move up from the C39v2 to this as soon as I can
  2. Both are awesome choices and you won't be disappointed with either.
  3. The decision between getting a converted or non-converted Saiga comes down to personal preference since the base rifle is still the same in either case and can be upgraded just the same. I've done two conversions so far (a 7.62 and a 5.45) and I'm looking to get another unconverted 5.45 before they disappear. If you go with a 5.45, keep in mind (just as Carl_g said above) that 15 round 5.45 mags don't exist (at least I've never been able to find them). A quick internet search will get you to factory (Tapco) and blocked10 round mags; however, if you want 15 rounders, you'll have to have them custom made to block a 30 rounder to 15 or have someone make you a Tanker style mag that is either cut down to 15 or 20 round length that is blocked to 15. If you go the custom route, spend a little extra cash and have a Bulgarian or Russian magazine cut down so that you'll have one with metal locking lugs, rather than the Tapco and ProMags which have plastic lugs (you'll want these mags to last since you're having them custom made) Going back to your original question, you really can't go wrong with either choice (converted or unconverted).
  4. I don't doubt it - I think that any tap will do as long as you go slow and don't force it. I think that the advantage of the slightly more expensive taps is that they are a little harder so they will give you a tiny bit of a safety buffer if you force it accidentally. I did see one conversion video where a guy chucked the tap into a power drill and went to town with it Sent from my iPhone using Tapatalk
  5. The bullet guide's really not too hard to do. The best advice that was given to me was to buy a quality tap from Home Depot or Lowes (don't use the one that comes in the kit) use lots of real tap oil, and to not force the tap at all. My hands were shaking the first time that I did it but once I did it, I realized that it isn't too hard. Sent from my iPhone using Tapatalk
  6. Wasn't there some case in the 90's involving an AK where a judge more or less said that that the "substantially identical" definition was BS because an average person could not know if something was "substantially identical" to a banned weapon without "initimate knowledge" of all variants of a banned weapon? I'm trying to find a link on the web but I'm coming up blank
  7. Keeping in mind that I'm not a lawyer, I was always under the impression that, as long as the model number that is stamped on the receiver does not contain "AK47", you should be okay. That's why the Palmetto State Armory AK might not fly here since the model number is stamped as "PSAK47" Sent from my iPhone using Tapatalk
  8. I know a few guys that have ordered AKs from Prepper Gun shop and they had no complaints. Similar to Atlantic, they seem to be ready and willing to work with you if you identify an issue with your gun before the transfer is complete.
  9. I was actually a dedicated US PALM grip user until I put a Magpul one of my conversions - I now think that I've jumped to the Magpul side of the fence as far as pistol grips go (I'm still not a huge fan of the Zhukov handguard though)
  10. Yeah - I didn't realize when I got into the 5.45 guns that pulling together magazines would require this much work, especially tracking down 15 round options. That having been said, it's worth the effort since I'm really starting to like shooting round. I'm kicking myself for not getting into it earlier when the prices were cheaper. Sent from my iPhone using Tapatalk
  11. I'm waiting on an invoice from him, but his website lists the chop down price as $15/per magazine. It's a pretty big jump up from the rivet job, but I figure that I'm paying a premium for not getting hassled at the range about whether a 30 rounder is pinned or not Sent from my iPhone using Tapatalk
  12. Thanks for the tip - I was looking at Jestice Arms site for 5.45 mags but he's only got 10/30 blocked AK 74 mags. It didn't seem to make much sense to me to give up 5 rounds, so that's why I ended up ordering some custom cut-downs Sent from my iPhone using Tapatalk
  13. I just sent an order to Nick this morning for some 15 round cut downs - I couldn't find any bakelite mags that weren't going to break the bank but I did find some surplus Bulgarians that were reasonably priced
  14. The RWC conversions are done fast and and somewhat cheaply (example, the trigger guard that they install is not a standard width, so not all pistol grips will fit without some Dremel modification). If you're up to it, buy the unconverted version from Atlantic Firearms and do it yourself. Even if you do the conversions in stages, you'll most likely come away with a gun that fits your needs http://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/russian-saiga-ak-47-rifle-iz-132-detail.html?Itemid=0 The new WASR-10s are good as well. I bought one recently and it was put together fine. No canted sights or poorly formed rivets. Atlantic Firearms is a great company to deal with. They do a quick check of the gun for the known issues, so your chances of getting a lemon are pretty small. They are also very good with handling any issues that you may find before you complete the transfer paperwork.
  15. No worries. Finding reduced capacity 74 mags is a bit of a unicorn hunt unless you want Tapco 10 rounders. I'm going to order some Bulgarian mags to have chopped to 15 by Bad Element out in Utah. I hate to have a good mil surplus magazine chopped but it seems to be the only way to get a quality 74 mag (metal feed lips, etc) here in NJ Sent from my iPhone using Tapatalk
  16. Before I go welding the Night Brake on my gun, has anyone tried one of these out? http://www.cncwarrior.com/Compact-Brake-p/27388.htm I know that they look a little like the end of a howitzer barrel and they're supposed to pretty loud, but I'm kind of interested to see if anyone's pinned one on.
  17. Does he carry 7.62x39 blocked mags or or 5.45x39 mags? It's the 5.45 ones that I was looking for
  18. Will do - I'm waiting on the Big Brown Truck to deliver my parts - I'll post pictures as soon as I can get things rolling
  19. Ha! - If it will make him feel any better, I swear on my copy of "The Gun" that there won't be any TAPCO parts on any of my conversions - I'm just going a little "non-traditional" on this conversion
  20. I actually ended up ordering the CNC adaptor and the Manticore Arms Night Brake last night. I went back-and-forth on the standard 74 style brake for awhile and decided to go with something a bit lighter. The Night Brake gets decent reviews, so we'll see what happens.
  21. I also looked around for a review of the CNC Warrior 74 brake and came up empty. I saw a few mentions of it on one of the AK forums and the general consensus is that it "works okay, but not as good as a "real" one". I did some more research last night and I might actually go with a Manticore Arms brake instead of the 74 style brake.
  22. I'm just not sure that my skills are up to hacking away at the barrel to remove the existing FSB and trying to install and pin the new one. It looks relatively straight-forward on some of the YouTube videos that I've seen; however, I never underestimate my ability to absolutely screw up the simplest mechanical task at times. I'm also not sure what I'd really gain by replacing the FSB rather than just using the adaptor ? I'm not planning on attaching a cleaning rod to the gun, so I'm not sure what I'd be gaining by swapping out the FSB other than a) proving to myself that I can do it and b) having a more "authentic" AK. Neither of which is a bad thing, but I'm just trying to weigh out the pros and cons of each approach.
  23. So, I'm in the process of doing a quick conversion on a Saiga 5.45x39 rifle. I'm not going to do a full front end conversion right now, so I'm not going to swap out the FSB for now, but I do want to put a real AK-74 brake on the gun. I'm planning on threading the barrel and attaching one of these CNC warrior Saiga adaptors so that I can then attach a 24x1.5 threaded AK74 brake http://www.cncwarrior.com/Saiga-M14X...er-p/24955.htm As far as brakes go, I'm trying to decide between these two new ones: https://www.k-var.com/shop/AK-141B.html https://www.k-var.com/shop/AK-141US.html And these two re-furbished ones: http://www.apexgunparts.com/bulgarian-ak74-muzzle-brake-w-round-cut-g-vg-refinished.html http://www.apexgunparts.com/bulgarian-ak74-muzzle-brake-w-zigzag-cut-very-good-refinished.html I didn't consider the Tapco or CNC Warrior versions of the 74 brake since they supposedly don't work as effectively as the "authentic" brakes. Which one of these brakes do you guys recommend? Is there another brand/mod that I should consider?
  24. Thanks - Nick seems to be a good guy and a few other AK guys in NJ have referred me to Bad Element as well - I've been traded some messages with Nick over the past couple of days to get an order over to him. I was actually going to have him rivet some 30 rounders to 15 instead of chopping them. Right now, I'm looking for a site to order the mags at a decent price. Any suggestions?
  25. I've heard mixed stories about certain Saiga 5.45 guns that will run without one while others will not. My theory is that every other AK that I have has a BG installed, so it's worth it to me to spend the $15 and an hour to install one. At worst, it will prevent the chance for bullet set-back if a round happens to slam into the shoulder of the barrel while it's being chambered. Sent from my iPhone using Tapatalk

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.