-
Content Count
138 -
Joined
-
Last visited
-
Feedback
100%
Posts posted by ChrismNJ
-
-
did anything ever happen to bill A800 ccw? or its down the drain?
-
i have sent my check out few weeks ago, but still didn't get cashed, wonder if they got it
-
k thank you, everything else good? no priming and powder drop die need it?
-
ok im feeling like im getting somewhere as far as dies, thats whats in my cart would that be it or i need more for hornady lnl
stage 1 prep work
1. Lee Universal Decapping and Depriming Die
2. Lee collet neck sizer die
3. Dillon's rapid trim 1200 with rapid trim 1200 die and rt 1200 replacement blade
stage 2 loading
belive priming and powder drop die comes with LnL? or need that as well?
1. Redding Competition Seater Die
2. Lee Precision Factory Crimp Die
or get the Lee Ultimate Die Set?
BTW thank you evryone contributing to my project!!!!
-
crimp is that nessary? doest your bullet seating crimps?
-
what dies do you guys use? for second stage reloading? (after u resize and deprime)
-
You got yourself a good deal. The company I am currently working for starts out at about $10,000 for a 20kw and goes up.
yes it was a good deal also they change the whole panel to generac one with transfer switch in it, didnt want to hang anything on my house
-
i am also considering single stage press
-
Chrism. If your around central jersey let me know. Ill show you the set up on a lnl press for 223. I just started a few months ago. But once you get a few under your belt its not so confusing. Im loading 223 308 9 45 and 38. Ive been saving brass for awhile.
thank you that would be great
-
Also, the 1200 is a good unit but the 1500 is more robust/powerful and gives you the flexibility of being able to convert 5.56 brass to 300BLK should you every desire to. I'd also highly recommend making your own case lube with liquid lanolin and OTC isopropyl alcohol. I get 4oz of lanolin and 32oz of alcohol for about $15 and that makes 36oz of case lube. Throw it in a $0.75 spray bottle and you've got your own One Shot lube that is a whole lot cheaper and very quick/easy to apply. You could then eliminate the lube die and swap in a Lee universal which cheaper: http://www.midwayusa.com/product/136543/lee-universal-depriming-and-decapping-die
what are other choices for accurate resizing?
-
im just getting in to reloading and have million and one questions lol
-
You'll need Dillon's sizing die for the RT1200. It's a special double ended die. I'd then recommend a decapping die rather than using the sizing die that comes with that four die set.
the rcbs lube die #1 is decapping unit. probably don't need the whole set of 4, but just in case
-
I went with an interlock and an outside generator only inlet box. I made a short video.
it is very quiet, i heare my 20wk generac from far away
-
does anyone run a set up like this? wondering if i missed anything?
-
what do you use to remove old primers? is it possible to use hornady lock n loa plant to deprim or beter off getting a single stage with depriming setup?
-
crap. guess i'm going to dilute it more with my tears as i'm dumping it out :
use for cleanning lol
-
When i did my numbers it came out to about .80c per gound but thats with new brass
-
what is approx. cost of relading per round or 1000 rounds? for .223 55g fmj with new brass or reuse?
-
Probably a mineral sediment from the water used to make it. They cut corners probably and used regular water.
+1 agree
-
the hornady case prep trio seem like guess work
-
I moved to this, it's been the fastest most accurate I have used.
https://www.bigcatcoffees.com/store_docs/B150_direct_plumb_kit_install.pdf
My iPad has lost its mind... Try this one instead. Although,I am enjoying that coffee maker.
i gess you need both of them to reload lol. thank you, nice trimmer
-
is there something we dont know about it yet?
-
-
just a transfer switch should run u around $500
Question for LEOs
in Firearm Hobby / Sport Discussion
Posted
well that would make sense, but don't forget 90% of politicians don't.