-
Our picks
-
M&P15-22 CONSUMER SAFETY ALERT
Lakota posted a topic in Rimfire Pistols & Rifles,
This has been posted on S&W's facebook page and I know not everyone is on facebook. Not sure how else they are going to release this info so here it is just in case anyone owns one of these:
Smith & Wesson has identified two M&P15-22 firearms from recent production on which the breech face counter bore depth was not within manufacturing specification. In those firearms, the lack of depth may allow the bolt, upon closing, to crush the rim of the case, causing the round to fire, cycling the bolt, and potentially resulting in multiple discharges without depressing the trigger.
We are asking consumers of all M&P15-22 firearms manufactured before February 1, 2019 to inspect their firearms bolts for this condition.
STOP USING YOUR FIREARM UNTIL IT HAS BEEN INSPECTED AND YOUR BOLT REPLACED (IF NECESSARY).
To determine whether your firearm is affected by this condition, please inspect your firearm by following the inspection instructions provided at MP15-22SafetyAlert.com.
-
- 32 replies
-
-
3/8/2019 - Quick Update
Maksim posted a topic in Announcements, Support & Suggestions,
Hey guys and gals,
Just a quick update... there was a security update that needed to be applied to the site which forced me to upgrade a bit earlier than I planned.
Should be done and working right now. Some features are still being upgraded and database being reindexed. So for now may be a tad slower... update in a bit.-
- 0 replies
-
-
Firearms ID/Pistol Permits system switches to the NJ FARS
Krdshrk posted a topic in Announcements, Support & Suggestions,
NJ has now switched to the Firearms Registration and Application System (FARS).
https://www.njportal.com/njsp/fars
Instead of applying for your FID or Pistol Permits at your township PD, you'll go directly to the online system now.
Step 1: log on to https://www.njportal.com/njsp/fars
Step 2: Enter your Township's ORI Number (You will have to contact your local PD to obtain this information. Some may list it on their township website)
Step 3: Complete the online application. You may complete the application using a smartphone, mobile device, laptop or desktop computer. When completing the application you will need the email addresses of two (2) reputable references. Your references can be family members.
Step 4: You must appear at your police department to pay for your initial Firearms Identification Card (FID Card) and/or Pistol Purchase Permits. Your application will not be processed until you have paid for the FID Card/Pistol Permits. Non-refundable payment is required to be made prior to the completion of the background as per NJSC 13:54.1.4.
* You will be receiving automated email updates throughout this new process.
* Once your application is complete, a station representative will contact you to retrieve your FID card and/or Pistol Purchase Permit documents.
* Please advise your references that the FARS system will email them the reference questions to be answered. Your references can complete the questions using a smartphone, mobile device, laptop or desktop computer. Please advise them to complete the questions immediately to progress your background application.
* The online application is applicant driven. Please ensure that you have entered the best phone numbers for yourself and references as well the best email addresses for you and your references.
Edit: If you go through the NJSP - here's the list of ORI Numbers: https://www.nj.gov/njsp/firearms/fars.shtml-
- 109 replies
-
-
9mm $7.49 per Box, 5.56 $5.66 per box free Ammo Can.
Maksim posted a topic in Hot Deal Discussions,
Palmetto is having more ammo sales that are even better with Vista/Federal rebates.
Case of Blazer Brass, 9mm 115 grain, $169.99 free shipping, minus $20 rebate which brings it to $149.99 for 1,000 rounds, or 20 boxes.
PSA Link
For 5.56/223, there is Federal XM855LC1, FMJBT, Steel Core on stripper clips, with ammo can! $139.99 with free shipping, minus $21 rebate for $118.99 for the package, or $5.66 per box with free ammo can.
PSA Ammo Link-
- 1 reply
-
-
Winchester 38 Special 130 Grain FMJ Ammo Recall
Maksim posted a topic in Ammunition & Reloading,
Guys and gals, FYI... Winchester just issued a recall for 38 Special 130 Grain FMJ ammo.
Notice below.
PRODUCT WARNING AND RECALL NOTICE
WINCHESTER® 38 Special 130 Grain Full Metal Jacket
Olin Winchester, LLC (“Winchester”) is recalling three (3) lots of 38 Special 130 Grain Full Metal Jacket centerfire ammunition.
Symbol: USA38SPVP
Lot Numbers: KF21, KL30 and KM52
Winchester has determined the above lots of 38 Special ammunition may contain incorrect powder charges. Ammunition with excessive powder charges may cause firearm damage, rendering it inoperable, and subjecting the shooter and bystanders to a risk of serious personal injury or death.
DO NOT USE WINCHESTER® 38 SPECIAL 130 GRAIN SYMBOL USA38SPVP WITH LOT NUMBERS KF21, KL30 or KM52. The ammunition Lot Number is ink stamped inside the right tuck flap of the 100-round carton as indicated here. The symbol is printed above the UPC bar code.
To determine if your ammunition is subject to this notice, review the Symbol and Lot Number. If it is Symbol USA38SPVP with Lot Number KF21, KL30 or KM52, immediately discontinue use and contact Winchester toll-free at 844-653-8358 for free UPS pick-up of the recalled ammunition.
This notice applies only to Symbol USA38SPVP with Lot Numbers KF21, KL30 and KM52. Other Symbol or Lot Numbers are not subject to this recall.
If you have any questions concerning this 38 Special centerfire ammunition recall please call toll-free 844-653-8358, write to Winchester (600 Powder Mill Road, East Alton, IL 62024 Attn: USA38SPVP Recall), or visit our website at www.winchester.com.
For more information contact media@winchester.com-
- 10 replies
-
-
Forums
-
Welcome to NJ Gun Forums
-
- 4
- posts
-
- 736
- posts
-
- 27,485
- posts
-
-
NJ & Federal Gun Law Discussion
-
- 107,303
- posts
-
- 8,125
- posts
-
- 2,644
- posts
-
- 3,617
- posts
-
-
New Jersey & More
-
- 241,880
- posts
-
- 8,952
- posts
-
- 3,505
- posts
-
- 4,709
- posts
-
-
Shooting in New Jersey
-
- 14,321
- posts
-
- 33,327
- posts
-
- 28,139
- posts
-
- 23,686
- posts
-
- 4,453
- posts
-
-
Firearms Discussion
-
- 89,702
- posts
-
- 595
- posts
-
- 10,761
- posts
-
- Which One?
- By Lakota
-
- 70,540
- posts
-
- 82,699
- posts
-
- Sig Virtus
- By Athc08
-
- 17,645
- posts
-
- 1,124
- posts
-
- 551
- posts
-
- 29,665
- posts
-
- 6,139
- posts
-
- 14,564
- posts
-
- 483
- posts
-
-
In the community
-
- 7,330
- posts
-
- 1,042
- posts
-
- 5,811
- posts
-
- 852
- posts
-
- 154
- posts
-
- 163
- posts
-
- 220
- posts
-
- 29,604
- posts
-
-
NJGF Vendor FFLs
-
Freedom Sports LLC - Shawnee On Delaware, PA
Firearms and Accessories Dealer, Class 3 570-460-3560 www.FreedomSportsLLC.com
- No posts here yet
-
Garden State Shooting Center
Firearms and Accessories Dealer & Range. 1955 Swarthmore Ave Lakewood, NJ 08701 732-987-6990
- 38
- posts
-
Gun for Hire
Firearms Training - 3,037
- posts
-
JT Custom Guns & Collectibles
Firearms and Accessories Dealer. - 274
- posts
-
Monmouth Arms - Morganville, NJ
Firearms and Accessories Dealer. - 1,142
- posts
-
- 83
- posts
-
RTSP - Randolph, NJ
Firearms and Accessories Dealer & Range.
- 59
- posts
-
- By CageFighter
-
SC Arms - Spotswood, NJ
Firearms and Accessories Dealer. - No posts here yet
-
Shore Shot Pistol Range - Lakewood, NJ
Firearms and Accessories Dealer & Range. 730 Airport Rd. #4, Lakewood, NJ 732-905-6888 www.ShoreShotPistolRange.com
- 2
- posts
-
Sunrise Antiques - Chesterfield, NJ
Firearms and Accessories Auctioneers. - 96
- posts
-
Tactical Training Center - Flemington, NJ
Firearms and Accessories Dealer & Range. 10A Minneakoning Rd., Flemington, NJ 908-782-9000 www.TacticalTrainingCenterNJ.com
- 47
- posts
-
-
NJGF Manufacturers, Accessories and Training Vendors
-
Green Academy of Personal Protection
Firearms Training & Techniques
http://www.gappnj.com- 328
- posts
-
Midwest PX
Your Source for AR15 Parts & Accessories - 1,781
- posts
-
Pew Pew Plates, LLC
Steel Plates & Accessories - 14
- posts
-
Shoot NJ
NRA Instruction at 4 Locations - 55
- posts
-
- 81
- posts
-
- 133
- posts
-
-
Who's Online 31 Members, 0 Anonymous, 86 Guests (See full list)
-
NJGF members in chat (3)
-
Forum Statistics
65,312
Total Topics1,008,839
Total Posts
-
Supporting Vendors
-
-
Latest Topics
-
-
-
-
-
Blog Entries
-
-
MarketPlace Listings
-
-
Latest Posts
-
I have no clue but im sure some components are made in the USA. Foxconn will be making chips in the US and i would make sense some of that will be for apple. China black / grey market carries everything. no matter what it is or who makes it... They are thieves plain and simple.... Would i love American companies to make products in america... YES 100% Sadly over the years the american market has be hostile to business, Only after trumps election have we rolled back some regulations. Im hoping it continues... If we fall back less and less will be made here. -
We have a 2018 and a 2019 GMC Terrain and both have the shutoff feature. There’s no way to turn it off bu5 once you get used to it it’s really not intrusive. I am doubious of how much fuel it actually saves though. Maybe if you are stopped at lights or in traffic a lot but that not part of my driving... -Jim -
And which of those components are actually made in the U.S? Not talking about company affiliations and locations, i'm talking about location the physical hardware is made. The funny thing is that you can build an iphone from scratch buying all the components from street vendors in China because Apple can't control the gray or black market in China. -
Sorry, I can't help with a method to permanently override it, but when I had a rental GM with that feature I learned moving the steering wheel slightly would prevent it from shutting off also. -
Many thanks to SW9racer. I now have what I need. The boy will be pleased.
-
-
Today's Birthdays
-
-
