Search the Community
Showing results for tags 'wts'.
Found 24 results
-
Up for sale is an ADM Extended Recon Mount (30mm). The mount is in excellent condition, having only made a few range trips mounted to an AR15 upper: Specs: 30mm ADM Recon Extended Recon Mount (MPN: ADRECONX30) $125 shipped & insured The mount is cross-posted, so it will go to the first unconditional "I'll take it" followed by a PM PayPal preferred (if you select Goods & Services, please add the appropriate percentage so that I net the sales price) Not interested in trades PM me for any additional pictures -
$85 shipped and insured Comes as shown (I don't have the original packaging) Scope body and glass are excellent condition The reticle can be displayed as Red or Green PayPal preferred. If you use the Goods & Services option, then please add the appropriate percentage so that I net $85 Listing is cross-posted so preference will be given to the first unconditional "I'll take it"
-
Up for sale is my Leupold VX-3i LRP 4.5-14x50 scope with TMR reticle (FFP with mil/mil turrets with .1 mil adjustments). The scope has seen moderate use over a couple of years on a bolt action rifle and is in excellent condition including the glass. Link to product specs: https://www.leupold.com/scopes/rifle-scopes/vx-3i-lrp-4-5-14x50mm-30mm-side-focus-mil-ffp Asking SOLD as shown , including the Badger Ordnance rings (1" Med-High 306-21) Without the rings, it would be $600 shipped and insured I no longer have the original packaging, so the scope will ship (very well protected) in a SWFA scope box PM me if you'd like any additional pictures. I'll try to take some pictures of the glass as soon as possible. The scope and mount are cross-posted, so it will go to the first unconditional "I'll take it" followed by a PM PayPal preferred. If using Goods & Services, then please add the appropriate percentage so that I net the prices listed above (I'll take $20 off for an in-person sale - I'm in the Princeton area)
-
The Lantac straight-pull AR15 upper shown below is on consignment with Howell Gun Works, so the sale would be done directly through them (you can find it on their Facebook page); however, I can help answer any questions that you may have here. Lantac Straight Pull AR15 Upper: $500 Lantac 18 inch 1:8 barrel chambered in .223 Wylde: chambering allows you to shoot either .223 or 5.56 specifically designed for manually cycled straight-pull rifles (no gas port) Lantac SPADA-M 15" forend (M-LOK) Lantac side charging upper receiver Lantac Dragon muzzle brake the brake is not pinned since this is not a semi-auto upper Lantac Enhanced straight pull side-charging BCG you manually cycle the action - similar to a bolt action but much faster because there is no vertical movement required - just pull the side charging handle back to extract and rechamber) the BCG is specifically designed for manual cycling - there is not gas key on the carrier Lantac Raptor charging handle provides the option to cycle the action like a "normal" AR if desired (it's much easier and efficient to use the side charger)
-
Brand new in box. FDE. Optic, mount and AFG not included. This is unfired outside the factory. Compliance work completed. Pickup at Garden State Shooting Center in Lakewood. $1700. $1450 Ill absorb transfer fee. -
wts WTS: Lee Loader Kit - 44 Magnum
medved11 posted a topic in Guns and Accessories For Sale or Trade
Up for sale is an unused Lee Loader Kit for .44 magnum. The kit comes as shown and has all of the parts that come with the set. $20 for a face-to-face sale in the Princeton/Hillsborough area -
The cleaning out of my workbench continues with a bunch of various AR parts that I'd like to find new homes for. Please let me know if you'd like any additional pictures or info on anything (everything comes as shown - I don't have any of the original packaging for this stuff). All prices are for a face-to-face sale but we can work out shipping cost if needed (I'll ship in a flat rate small or medium box). I'll take 5% off the total price for anyone that takes 5 or more items from the list. I’m located in the Princeton/Hillsborough area: Lantac Dragon 5.56 Brake (threaded 1/2x28): ***SOLD*** BCM KAG Grip (KeyMod - has rattle can camo job): $10.00 BCM Vertical Grip (KeyMod - has rattle can camo job): $10.00 Magpul Vertical Grip (Picatinny - OD Green): ***SOLD*** Arisaka Finger Stop (MLOK): ***SOLD*** Carbine Buffer Spring (not sure which manufacturer): $5.00 Carbine Buffer (no sure which manufacturer): $10.00 Vltor 5-position Carbine Tube: $25.00 Magpul Fixed Carbine Stock (has rattle can camo job and I believe that it's OD Green underneath): ***SOLD*** Way of the Gun Sling (Coyote): ***SOLD***
-
Up for sale is a lightly used Mesa Tactical 6-round side saddle with optics rail: $80 shipped (my work schedule right now doesn't leave much time for F2F sales) Comes as shown (with the two bolts that I found in the storage bag) This will fit either a Remington 870 or 11-87 The saddle has a krylon paint job PayPal F&F or add the appropriate percentage if you choose G&S (net $90 to me) The saddle is cross-posted so the first unconditional "I'll take it" wins
-
Up for sale is a gently used Magpul M-LOK bipod: SOLD(my current work schedule doesn't leave much time for F2F sales) Comes as shown (no original packaging) The bipod has a krylon paint job that can be easily removed. It's black underneath PayPal F&F preferred or add the appropriate percentage if you choose G&S (net $80 to me) The item is cross-posted so the first unconditional "I'll take it" wins
-
Up for sale is a UTG BP01 bipod: SOLD (the current work schedule doesn't leave much time for F2F sales) Used but in great condition Comes as shown (I don't have the original packaging) PayPal F&F or add the appropriate percentage for G&S (net $30 to me) The bipod is cross posted so the first unconditional "I'll take it" wins
-
Up for sale is a slightly used Porter Cable 6 gallon/150 psi compressor. Comes as shown but I’ll be adding some pics of some hoses and attachments that I’m going to sell separately (or we can work out a package deal. $65.00 (in-person sale only) I’m located in the Princeton/Hillsborough area
-
Up for sale is a lightly used Lantac Dragon muzzle brake. I had this on brake on a .223 bolt action gun for a short time and put approximately 60 rounds through it before I took it off SOLD for a local pickup in the Hillsborough/Princeton area (add $6 to have it shipped USPS) Very Good to Excellent condition. Comes as shown in the picture, I don't have the crush washer Caliber: 5.56x45mm Length: 2.57" Threads: Standard 1/2-28 Cross-posted, so the first unconditional "I'll take it" prevails
-
Up for sale is my Marlin 1894 in .44 Magnum. The rifle is in very good condition and, like the 45-70 that I've also got listed, has been pretty much a “safe queen” since I bought it three years ago. The factory sights have been upgraded to an XS Sights ghost ring set along with one of their extended rails. Price is SOLD Located in the Princeton/Hillsborough area Transfer fee is on the buyer Preferred FFLs for the transfer would be either Tier One in Union, Cheyenne Gunsmith & Firearms in Manville, or Howell Gun Works in Howell This gun (and the 45-70) will go on consignment at Howell Gun Works on May 25 if they don’t sell here before then Pictures available upon request I’ve got some leftover ammo that I can include in the sale for an additional cost (I'll see what I have and update this post) Link to Marlin’s description: https://www.marlinfirearms.com/lever-action/model-1894/model-1894-44-magnumspecial
- 2 replies
-
- 1
-
-
- lever action
- marlin
- (and 2 more)
-
Up for sale is my Vortex Spitfire 1x DRT prism scope. The scope functions fine and the housing and glass are in excellent condition. The only wear that I can find on it is the underside of the mount where it was clamping to the rail on my AR (see picture below). The scope has both red and green reticles and has seen moderate use and has been 100% reliable. The reticles may look a little blurry in the pictures but they are clear in real life (reticle pics are always difficult). SOLD Located in the Hillsborough/Princeton area Scope is cross-posted so the first unconditional "I'll take it" prevails
-
Up for sale is a 15” Troy Alpha Rail: - $85 shipped - Comes with a 4 inch picatinny rail section - mounting hardware included - excellent condition
-
Up for sale are two red dots that have been sitting unused in my bench so it’s time to find them a new home. Both are in very good shape and are fully functional: Bushnell TRS25 $20 shipped ***Sold*** Primary Arms MD-ADs $60 shipped ***Sold*** I don't have the box or paperwork for either of these, so they be sold as shown below but I'll box them up securely for shipping
-
Up for sale is a Primary Arms Prism scope (ACSS reticle) that I sponge painted awhile ago. I can’t remember the magnification level but it’s either 3x or 5x. It’s in very good condition and functions fine. $50 shipped ***SOLD***
- 5 replies
-
- 1
-
-
- primary arms
- prism scope
- (and 1 more)
-
All parts are listed below are brand new - I only opened up the packaging to inspect and then put everything away in my workbench. The parts are cross-posted on another forum, so please post an "I'll take it" followed by a PM so I know who has first dibs. The first unconditional "I'll take it" wins. Spikes Tactical Stripped Upper Receiver (SFT50M4): SOLD Link to manufacturer's description: https://www.spikestactical.com/collections/parts/m4-flat-top-upper/
-
Up for sale is my Mega Arms Orias (MLOK) chassis: Asking SOLD for a local pick-up Remington 700 Short Action Includes a "Type 2" Trunnion which allows beavertail (or straight) AR pistol grips to be installed) MLOK slots at the 3, 6, and 9 o'clock positions Can handle any barrel contour up to MTU Professionally Cerakoted in subdued Kryptek by Mike at Tier One Defense Includes the following: XLR Industries Folding Mechanism LUTH AR MBA3 Buttstock Mega Arms pistol grip Chassis is in excellent condition with some very minor wear around the magazine well and trigger guard I originally had my .223 Wylde barreled action sitting in this chassis until I repurposed the receiver for another build. I included a picture of that build to show how the chassis looks with a 16.5” barrel (sale is for the chassis only) I've got this cross-posted, so please post an "I'll take it" followed by a PM
-
Vortex Strike Eagle 1-6x24 with AR BDC reticle mounted in an ADM Recon Mount (30mm) SOLD for the optic (includes shipping - my work schedule at the moment is making face-to-face sales difficult) The scope is used but in very good/excellent condition (no visible dings or scratches on the exterior of either and the glass appears to be in great shape) Comes as shown with factory flip-up lens covers (I don't have the original box for either) The picture of the reticle is a little blurry but it's crystal clear in person. I mainly wanted to show that the illumination works and to give an idea of what the reticle itself looks like I've got this cross-posted on other forums, so the first unconditional "I'll take it" wins
-
Another one of my guns that has been a safe queen for many years. Smith & Wesson Model 686-6 revolver. 5" barrel. 7 rounds, 357 or 38 special. Gun came original with front HiViz sight and very nice contoured wood grips. $700 dropped off at your local NJ FFL, preferably an NJGF vendor. -
Thinning the heard a bit. Clean H&K P7 that I picked up some time ago. Unfortunately this gun has been a safe queen. Gun comes with original box, matching the serial number and 5 genuine H&K magazines which are now around $85 to $100 a piece. Also including a new IWB leather/kydex Mackenzie holster. Gun was made 10/1986. There is some holster wear consistent with the gun's military/police use. Can keep as is or refinish in the future. These guns are obviously no longer produced and have been shooting up in price and becoming collector pieces. $1,650 delivered to your NJ FFL, prefer NJGF Vendor. Transfer fees are on your end.
-
Up for sale The rifle is a Ruger Precision Rifle (Gen 2) with a Magpul PRS stock (Gen 3). The rifle is on consignment with Howell Gun Works, so the sale would be done directly through them and is available now. Details: SOLD .223 caliber (but can handle 5.56 as well according to Ruger) "Like New" condition with only 60 rounds of Federal Match .223 fired through it Comes with the following: Magpul Gen 3 PRS stock (folding) 1 Ruger polymer magazine Original Ruger adjustable buttstock Picatinny and sling stud bipod attachment points (the picatinny rail is attached now, the sling stud is in the box with the original buttstock) Keymod QD sling mounting point (currently installed on the left side of the handrail) Ruger factory muzzle brake Here’s an older picture of the rifle. The scope; scope mount; bipod; and bipod mount shown here are not included in the sale
-
$36 shipping included. New in original sealed wrapper. Manufacturer sells them new for $46 plus shipping. PM me if interested
