Old School

#1 you're being OVERLY CAUTIOUS!! #2 Drive up to the gate, use the intercom, explain yourself and one of the RO's will come let you in and show you around. Good Luck, you'll love it. OS

I just walk into the store. It's about 20 min away. Shoot at the range for 1/2 hour $10 $20 get's you all day. I don't know what the problem is?

Huge, where was this hog taken?

Wasn't commenting on your story nor do I care. My comment was on the "Hogzilla" pic. That wasn't shot by your friend too?

Not Jurassic Park Pat. It's a scene from Photo Shop 101

These are a three(3) piece wood kits. Butt stock, grip, and forend. You must have a rifle length buffer tube installed.

I'm shooting for about $150 shipped. Now I don't know if this is attainable but, is a reasonable #.

We're getting there slow but sure... Please send me a PM saying if you want a carbine , mid length or rifle length hand guard. All butt stocks are rifle length and require the appropriate tube, buffer, spring. Lastly Let me know if you want "A" wood or better or laminate OS

So far we have three including myself. It's not enough. I'll let this run another day.

Nope barrels are commercial available. Building a new rifle same caliber.

Just bumping so the morning guys see this

Recieved a PM Jackruf is # 2

When I get a quantity I'll hit them up.

OK Patrick you're # 1

There seems to be an interest in AR Wood. These folks at Lucid seem to be agreeable to a group buy. Lest see if there's any interest if so I'll handle it. http://woodforar.com/ I'm waiting for a barrel so I'll let this run for a week. OS

No coating on the metal just stock anodizing. Wood is real walnut.

Bipod is Sinclair, Barrel X-Caliber, Scope Nightforce 95gr SMK @ 2900fps

Boyds and Lucid both make wood. Rifle isn't built yet

Yep Like a 243 Win in a small frame AR Here's the little bugger

NO NO NO!!!! 6mmAR a deer rifle

Those of you that know me, know that I have more stuff than I can use. But I want a new deer / hog rifle...Like I don't have one already...LOL Should be good to 300yds. 100gr bullet at 2900fps. I have a 24" heavy barrel I use for tactical and it's a tack driver. But for a hunting rifle I want something a little not so black and traditional. So here you go... This is a file pic so it will have a different flash suppressor or a can and a detachable carry handle.

Brownells LE Wilson case trimmer 749-013-807WB Stainless Steel Case Trimmer Mfr Part: CTSSTDU

Concerning CR cost, facilities etc. Just to be relative to what's here in SC. Half assed range 100yd rifle, a few pistol bays $300/yr Decent range, active membership members, 4-6 pistol ports, 100yd rifle (20 positions), 800yd rifle 6 positions. $100/yr + four work days (you can buy out of work days) + $750 initiation fee So bang for the buck CR is cheap

OK so yes you misunderstand what is going on. Do some reading and you will see that the reloading process for the Wylde variation is no different than for a 223 Rem chamber. The difference in the Wylde chamber is in the throat of the chamber and has nothing to do with headspace. Yes always use a L.E. Wilson Case Length Headspace Gauge or similar to both set your sizing die and check your case length. From your picture you appear to have excessive headspace or you are WAY oversizing which with most dies is unlikely. Get the gauge, and check your cases after sizing. You can also check a fired case in the gauge and it will give you an idea of your headspace. PM and I'll help you sort out your issues. Headspace mic...ahh I don't know. Use the Wilson gauge.