DeerSlayer

This is why I won't use cheap pex or fittings. U only use Viega or Uponor/Wirsbo pex A and fittings. I have the tools for either brand. On domestic I use plastic fittings only, and for heat I usually use bronze instead of brass. They seem to hold up much better, than the junk that the big box stores sell. I'm not willing to chance the liability of using the cheap stuff. But I sure fix a lot of it every day it seems. Sent from my SM-G900V using Tapatalk

I normally use the Watts myself. But I love Caleffi products, that second one with the gauge is nice. Their stuff is top notch. Usually depends on what my supply house has in stock, and of course my customers budget. In NJ a Guage port is required at the main. The Guage itself is optional, but definitely nice to have. Sent from my SM-G900V using Tapatalk

Lol... Sent from my SM-G900V using Tapatalk

PM me about them. Sent from my SM-G900V using Tapatalk

Nice putting names to some faces. And seeing some familiar faces again. Yeah I agree sound was pretty horrible. But with the breeze it was a nice day to be outside for a few hours. Couldn't have been better weather. Sent from my SM-G900V using Tapatalk

That stupid stock cost more than the entire lower to build. Lol. Sent from my SM-G900V using Tapatalk

Bored last night. Built this a out of stuff laying around. 14.5" barrel 5.56 Pro Comp brake pin and weld Low profile one piece gas block SLR 12.5 M-lock Angled foregrip Magpul Aluminum 11 slot M-lock Picatinny rail FA BCG Magpul Mbus flip ups Aero stripped lower LWRC trigger guard BCM Gun Fighter Ambi charging handle Standard LPK (missing the buffer retainer spring!!! Grrrr! Had a spare with a stainless retainer too) Ambi safety (timber Creek) Ambi mag release (LJS AR Parts) QD ring Mill spec buffer/Tube (Midwest PX) AEON Tac LWB stock (Rainier Arms) Magpul grip Sent from my SM-G900V using Tapatalk

I saw those, they were great! Sent from my SM-G900V using Tapatalk

I had a good time, glad I went. Probably going to attend the one in April coming up as well. That's on a Saturday makes it a little easier. Sent from my SM-G900V using Tapatalk

Once you get over 80psi, the water is moving through the piping system at a velocity above 7 fps. And that will prematurely wear the inside of the piping system, especially at an elbow. That's why it's code here. Sent from my SM-G900V using Tapatalk

You will never get one. They were a one time deal. But if anyone has one it would be Joe at Mastodon Ammo and camo in Highland lakes. He actually had a few left over no one claimed. They may be long gone by now. But couldn't hurt to make a phone call and ask him. Sent from my SM-G900V using Tapatalk

All the past mods promised new T-shirts too. Empty promises for years... lol Congrats Peel! Sent from my SM-G900V using Tapatalk

Everywhere in Morris/Sussex/Warren County where I work has crazy hard and usually low Ph water. Without treatment equipment, everything is screwed. Sent from my SM-G900V using Tapatalk

I've definitely seen tanks that have let go and destroyed basements. That's why you change them when they hit a certain age, and don't wait for failure. Sent from my SM-G900V using Tapatalk

I can... all about who you know. Lol Yes I've shot there before, and ran my dogs there in the past for them. It's in my town. I live 5 minutes away from Hudson Farm. I have friends that are employed there as well. Sent from my SM-G900V using Tapatalk

They're are good ones. But most of my customers have hot water boilers. So I sell indirects. The biggest issue I find with tank less units is no one does the maintenance. I've probably ripped about a dozen out of houses and put a tank back in, because they were too lazy to have it serviced every year. And after 6 years of shit is built up in the heat exchanger it's too late to do anything with it. I'm not a fan of wall hung tank less units. Sent from my SM-G900V using Tapatalk

Yeah you can beat it in. Or throw it out. The instructions tell you how to mount it. But I like the water port facing up. I hate seeing them face down or horizontal. When you have to change a ruptured one, it's much easier. I charge more when I have to take a shower while changing it. Sent from my SM-G900V using Tapatalk

Can I get a CNJFO banna hammock? Lol Sent from my SM-G900V using Tapatalk

Won't fill a roman tub. There's a reason he needs 75gal of storage. Sent from my SM-G900V using Tapatalk

Only if you have extremely acidic water. I've seen them get attacked by it, and start to close up from the inside. They'll probably be fine if you have city water. They probably treat it for pH issues most likely. It also makes changing the tank down the road much easier. I usually use some plumbing grease on the threads of the union, so they come apart ten years down the road. I'll put it to you this way, I have them on my water heater in my own house for a reason. Sent from my SM-G900V using Tapatalk

Get dielectric unions. That's what's causing the issue. Galvanic corrosion, sometimes their necessary. Depending on how many old telephone grounds, are attached to your plumbing throughout the house... Sent from my SM-G900V using Tapatalk Mount it anywhere, as long as it's supported. They actually make a pretty nice wall mount strap kit for them. Supply house.com lists them. Sent from my SM-G900V using Tapatalk

I've never been to Berkeley Heights in my life lol... Sent from my SM-G900V using Tapatalk Blackman supply in Clinton, is the closest place I know of down that way. Any Ferguson should have it as well. I think there's one in Edison, and Flemington.

All my suppliers carry bradford. Sent from my SM-G900V using Tapatalk

Any 1" heat trap nipple should work. Doesn't matter what brand. Plumbing supply house should have them, and an annode rod. Bring your model and serial number off the water heater with you. What brand? Looks like the AO smith paint color in the picture? Sent from my SM-G900V using Tapatalk

I put them on on demand tank less units aslo. I've had them blow relief valves without one. Depending on the temp it's set to. Sent from my SM-G900V using Tapatalk