RobCo 16 Posted August 26, 2016 Hi all I have an Enfield Jungle Carbine and unfortunately no matter how much I tighten the bolt that holds the stock. The stock still comes loose even though the bolt is tight I don't want to take it to the range and have it come loose while I'm trying to use it Any suggestions? thanks Quote Share this post Link to post Share on other sites
Old School 611 Posted August 26, 2016 Hi all I have an Enfield Jungle Carbine and unfortunately no matter how much I tighten the bolt that holds the stock. The stock still comes loose even though the bolt is tight I don't want to take it to the range and have it come loose while I'm trying to use it Any suggestions? thanks From what it sounds like the stock is loose in the receiver. Bed the stock using a bedding epoxy because if you shoot it with a loose stock you may split the stock. If you're careful you'll never see it and it won't affect collectability. 1 Quote Share this post Link to post Share on other sites
RobCo 16 Posted August 27, 2016 Thanks, I was told to get barrel bedding, but I couldn't find it. The bedding epoxy should do it thanks again Quote Share this post Link to post Share on other sites
Old School 611 Posted August 27, 2016 Thanks, I was told to get barrel bedding, but I couldn't find it. The bedding epoxy should do it thanks again Barrel bedding is the same thing. JB Weld will work fine with shoe polish used as a release agent. Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites