Vicious

Sorry for your loss. I lost my pup last September due to illness and I still miss her. You took good care of your pup.

Far from an expert on Colt commercial products, but I do own 2 Colts and have been a fan/ follower for many years, so take this fwiw. IMHO it doesn’t matter. As far as I know Colt outsources their grips anyway. If you like the way they look, use them. As for the medallion, the picture is not super clear.

She is beautiful, sorry that she needs a new home.

Thanks for the heads up. I haven't shopped at lambo's, but I have seen them on gun.deals. I don't see a need to switch to closed cell foam that still needs to be cut. I don't have any rust/ moisture issues with the pelican foam. I do use their silica desiccant in the cases though.

The pick n pluck has not been holding up too well with use. I am on the fence with this organizer though. It would give a bit more utility to my long case. I’d be able to transport more than one long gun to the range in there.

I used the foam that came with the case. The long case I cut. The small cases were pick n pluck.

I don’t use this, but I do use Pelican cases. I will say that cutting the Pelican foam is not hard, and it looks pretty good when done properly, however the ability to change your arrangement in the case is pretty awesome.

Do what makes you comfortable. I have a fair amount of lead exposure (daily) and I consider washing my hands thoroughly post exposure adequate. It probably isn’t, but I don’t have a ton of time to dedicate towards decontamination. Whatever amount of lead is on my clothes stays with me, because there is no procedure there until they get into the wash machine. That being said, they are washed separately. It is my (oversimplified) understanding that inhaling/ ingesting lead are the two main culprits. Assuming your range has proper ventilation, you use de-lead wipes, soaps, etc… I would say you are pretty safe. The changing of shoes/ clothes is also probably pretty good, but why not just wear a long sleeve shirt over a t-shirt and basketball shorts so you can remove your outer layers completely before entering your vehicle? I would like to know the volume of shooting it actually takes (and how bad the ventilation must be) for someone to absorb unacceptable levels of lead. I’m not sure how often or how much you shoot, so this could be over doing it? See my first line, though. If you are happy doing this, then it has value for you. No one can really tell you you’re wrong. I’m a bit more inclined to believe that if you aren’t doing cardio, heart disease will get you before the lead.

https://store.mopar.com/oem-parts/mopar-torque-box-shield-right-57010352ah?c=Zz1ib2R5LXNoZWV0LW1ldGFsLWV4Y2VwdC1kb29ycyZzPWZsb29yLXBhbnMmbD0xMSZuPVNlYXJjaCBSZXN1bHRzJmE9ZG9kZ2Umbz1jaGFyZ2VyJnk9MjAyMyZ0PXN4dCZlPTMtNmwtdjYtZmxleA%3D%3D That is the link to the part. It is called a torque box shield, and it is located under the passenger side door, roughly between the front and rear door. It is just a cover, and there is one on the right and left side of the car. @Krdshrk unfortunately, it is not a plastic clip. The top image is the bolt that separated. That little gray disk on the bolt is where it separated. There are quite a few more holding the shield in, and they are fixed to the undercarriage. The picture with the red circle is where the bolt tore away from the body. @1LtCAP Not sure if the above helps, but I can take more pictures after work today.

In a bit of a pickle. I was driving in the rain at 5 am this morning and I hit a puddle (didn't see it) doing 35-40mph. There must have been a good bit of water because it splashed up all around the car. Immediately after, I noticed a noise. A plastic panel (torque shield I believe it is called) was dropping down a bit. After arriving at work, I checked it out a bit closer. It appeared that a bolt had snapped. What in fact happened is that a bolt or mounting post of some kind ripped out of part of the undercarriage. Luckily it was just one. I have temporarily secured the plastic panel with zip ties to a cross member, but I would like to have this properly fixed asap. Does anyone know what I could do to repair this? Maybe a similar experience? Advice appreciated.

That was meant as a little joke because Taurus is not particularly known for quality and reliability. I have no firsthand experience, but after following some Reddit posts and a few forums (over a decade), I choose to steer clear. I’m glad you had a good experience, but you would (at least from my perspective) appear to be the exception and not the rule.

They should test the gun. It’s a Taurus. If it doesn’t work they should drop the charge.

Weekend bump.

UPDATE - Pulling the sale for now. I had a chance to look through a COMPM5 (the optic I want to replace this with) yesterday, and the dot looked horrible to me. I do have an astigmatism, but I did ok with pistol dots so not too sure why it looked so bad. Regrettably I am pulling this sale until I find a viable alternative. Sorry for the inconvenience. As title says. Pictures to follow soon. Includes box and battery. Asking $350. I live in Mercer County, but I travel quite a bit daily, meetup can be arranged. First "I'll take it" wins. Thanks for looking.

6 shot, 4" barrel. Fired 2 boxes of .357, cleaned it, stored it, never looked at it again. Asking $700. I live in Mercer County, but I travel the state daily. Would prefer Kulak Arms in Lawrence Township (great guy if you never met Rich) but may be willing to meet, depending on where. First "I'll take it" wins, usual rules. Thanks for looking.

That is a shame, too bad they wouldn't work with you. I have shot a full gold desert eagle, and yes, it is quite an experience.

Why not call them up and see what they are willing to do? I'd be willing to accept that issue for a few hundred off. Lol

I mean, you're probably going to do worse to it during normal use. That being said, I have a Colt 1911 that came from the factory and had a blemish on the dust cover. Everyone that sees the gun says that it is beautiful. I on the other hand can't pick the gun up without noticing it. The real question here is for you to answer. Can I live with it?

Weekend Bump.

Weekend Bump.

Thanks, it was perfect in my mind. Lol

Hello all, Selling my M640DF Pro Scout Light in FDE/ Tan. It was mounted to a rifle, but not close enough to the muzzle to catch any blast, so it is in good shape. Very low round count before it was removed. Pictures here. This sale includes the Scout Light with original switch, replacement cap that connects to the switch, and rail grabber switch with momentary/ constant on. It comes with a M-Lok mount. Also included, 1 Surefire 18650 (rechargeable). Asking SOLD. Will discuss meeting up with serious buyers. Pictures to follow tomorrow. Thanks for looking!

Hello all, I was going to keep this gun just to keep it, but it is the second P320 that I have owned and I just can't form an attachment. I am selling my AXG Scorpion along with a Leupold Delta Point Pro (no nv settings), Surefire X300U and Safariland 6354RDS (ALS holster, multicam black). Photos here. I have fired about 250 rounds through the gun (no noticeable wear). It includes the special case and accessories that come with a SIG Custom Shop gun. The Surefire and Leupold were purchased new for the gun, so the mileage matches. The Surefire has plastic rub marks from the holster, and carbon from being fired while mounted. I'm sure it can clean up if someone is willing to put in the elbow grease. The lens is clean as I had a protector on it. I still have the boxes for the Leupold and Surefire if the buyer wants them. Sale includes 3 magazines that need to be pinned. They will be left with FFL. My preferred dealer is Kulak Arms in Lawrence Township, however I am willing to meet in Mercer/ Hunterdon Counties. Can discuss other options with serious buyers. Asking SOLD for the whole package. Not looking for trades at this time unless you have something unique/different (whatever that means). Usual rules. First unconditional "I'll take it!" wins. Thank you for looking!

Could be a creation from this guy: https://garandguy.com/ Years ago he had a bunch of those BM style garands built up on his site. Not 100% sure, but if not from him probably something similar.

I have to resubmit. I sent a similar email months ago and never received a response.