Jump to content
rifleman

WTS Argentine Mauser

By rifleman, in Guns and Accessories For Sale or Trade

recommended_posts

rifleman    91

rifleman
Posted

Model 1891 Argentine Mauser 7.65 x 53 with bayonet. Not an exact match but fits pretty good. This fine weapon is an engineering marvel well over 100 years old. Ramp sight to 900 yards for harassing fire to prevent free movement in the enemy's camp. Steel is in pretty good condition. All threads have been lubricated and work fine. Crack in upper handguard & the stock was secured with 2 screws. I have shot this many times and he is a beast. If your'e looking for a shooter, Boyd's has replacement stocks and you can take your spot on the line with fine German craftsmanship.

Barrel has all the right stamps and marks according to several articles.

I had this gun for 35 years and time for a new home. I used to display it in my office with the bayonet but it looked way too scary.

22 boxes (440 rounds) of new ammo included. They go for $40 per box now! 

Rifle, bayonet (with metal sheath) & ammo $450 or trade for 12g target ammo/silver. I can bring it to Central Jersey Rifle Pistol Club for inspection.

First reply I'll take it gets the prize

52 inch stick.jpg

20170911_212352 (1).jpg

Share this post

Link to post
Share on other sites

Guest   

Guest
Posted

Interested! And a CJRPC member also.

Sending PM

Share this post

Link to post
Share on other sites

guest_post_header

guest_post_pbr_blurb guest_post_sign_in

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   editor_cannot_paste_images

Loading...
×
Go To Topic Listing

  • Recently Browsing   0 members

    No registered users viewing this page.



  • NJGF/SlavGuns Gun Giveaway!

    Ruger65Grendel.jpg

     

  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • widget_title_62d92a485801263be01ee3aa8a98e2a2

  • widget_title_609497550a8b1f05073e71cf558b5cc2

  • Similar Content

    • Guest
      WTS : Custom Milled AK
      By Guest
      Selling my Milled C39V2. Purchased a stripped NOS barreled receiver and the went with all surplus NOS parts  including Polish milled carrier and piston, Polish surplus spring assembly, Polish trigger guard, Polish rear sight, Russian surplus gas tube, WBP bolt, Beryl extended mag release, Romanian dust cover, WBP extended selector, ALG trigger, AKOU Tango Down hand grip, barrel cut to 14.5" and Meridian Defense BD2AK brake  (pinned and welded). All work done by Jonathan at Blackburn AKs. The rifle has about 50 rounds through it just for test firing. Action is smooth, with no hang up. I have a few projects that I am working on, and need the safe space. Since I don't really get to shoot it, decided to pass it along. Will also include the RS Regulate scope mount with the rifle. $1300. Prefer to meet at either FSS in Pinebrook or Point Blank in East Hanover for transfer. Buyer pays all transfer fees.




    • Guest
      (SOLD) Reloading Press and Components
      By Guest
      Great start for people looking to get into reloading. $500. (FIRM)

      RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
      Rockchucker Supreme IV Single Stage Press
      https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
      Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
      https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
      Inline Fab Automatic Case Ejector System 
      https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
      Inline Fab Universal double component tray system.
      https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
      RCBS
      Uniflow Powder Drop 
      https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
      M500 Mechanical Scale 
      https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
      Powder Trickler 
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
      Universal Case Loading Block 
      https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
      Hand Priming Tool for Small and Large Primers 
      https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
      Additional press add ons:
      (NIB) Advanced Powder Stand
      https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
      (NIB) RCBS Auto Prime System
      https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
      Hornady impact bullet puller.
       
      Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
      All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
      ****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
       
    • Guest
      [WTS] Troy Industries A4 “Other Firearm” Upgraded
      By Guest
      Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
      Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
      Full list of modifications:
      -Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
      -SilencerCo Muzzle Brake
      -SDTA 6” Blast Shield
      -SBA3 Brace (Black or possibly FDE available)
      -Magpul Gen 2 BUIS and Vertical Foregrip
      -CMMG Stainless Gas Tube
      $1550
      Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
      Still have stock barrel also if interested.
      **Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.

    • Guest
      Just got my FID
      By Guest
      I just got my FID for long guns, although I don't know anything about guns or ammo. What is a good gun to get my hands on that will help me learn more but won't break the bank, at the same time being ideal at home defense?
    • Smokin .50
      CNJFO HOG HUNT SUNDAY JAN. 26TH, 2020 AT MOHR'S WIDOWMAKER
      By Smokin .50
      CNJFO HOG HUNT SUNDAY JAN. 26TH! SAVE THE DATE!
      A PORKTASTIC GOOD TIME W/ 2A PATRIOTS & FRIENDS!
      by Black Wire Media Wed. Nov. 13, 2019 www.cnjfo.com/join-us
      The Coalition of New Jersey Firearm Owners is proud to announce we've scheduled our first Hog Hunt of the new season for Sunday January 26th. So mark your calendars and watch for our event page & sign-up on our website (coming SOON!). The guided Hunt is ideal for beginners & anyone looking for a challenge since this is a "NO license, ANY weapon" affair held on a 150 acre island in the middle of the Susquehanna River near Harrisburg, PA. Raffles, swag, lunch included. Stay Saturday night & party with us (Dutch Treat) OR come Sunday. A great way to fill the freezer & support NJ's busiest 2A group!
      Hunt includes hot lunch served on the island, field dressed hog, goody bag w/ swag items, raffles for great prizes (BRING CASH ON ISLAND) & all the memories you can take home!
      We recommend V. Roche & Son Butchers in Whitehouse Station, NJ.  A CNJFO sponsor, they have a renowned reputation for excellent service!
      Register HERE:  
      https://www.cnjfo.com/event-3629844


       

  • Posts

×
×
  • Create New...