Jump to content
Cheflife15

Grain size and accuracy

Recommended Posts

Newb question here. 

How much do these go hand in hand at say 10 yards or so? I bought some 147 grain speerman, and some 150 grain synthetic federal ammo as I read they were good but after doing more googling it says 124 grain is the best for czsp01? Should i habe any problems at 7.5 to 10 yards? Im really just using this as range ammo to practice grouping shots and wotk on techinique as im a new shooter.

Share this post


Link to post
Share on other sites

All my nines shoot 124 most accurately. Followed up by 115 and then 147. 
 

Unless your ammo or gun is fubar, accuracy at 7-10 yards should not be distinguishable. It’ll mostly be covered up by either you sucking or by bullet diameter. 
 

last time I bothered practicing that close, after the third shot or so it was time to pick a new spot on the target or just be happy with not missing the clover(ish) shaped hole.

Share this post


Link to post
Share on other sites

What ammo you use will be a personal preference of recoil, accuracy and cost.

All guns are not the same,  all ammo is not the same, what is accurate in mine may not be accurate in yours.

Its conceivable and or actual that recoil can be heavier with a lighter bullet than heavier bullet. Yet many factors go into "recoil" weight of gun experience of shooter, high power factor ammo or minor power factor ammo.

Whichever ammo you choose, it should be the one you hit the target with the most and what you feel comfortable with.

just try different ammo manufacturers and different weights of bullets and you will find yer preference!

Share this post


Link to post
Share on other sites
1 hour ago, Bagarocks said:

What ammo you use will be a personal preference of recoil, accuracy and cost.

All guns are not the same,  all ammo is not the same, what is accurate in mine may not be accurate in yours.

Its conceivable and or actual that recoil can be heavier with a lighter bullet than heavier bullet. Yet many factors go into "recoil" weight of gun experience of shooter, high power factor ammo or minor power factor ammo.

Whichever ammo you choose, it should be the one you hit the target with the most and what you feel comfortable with.

just try different ammo manufacturers and different weights of bullets and you will find yer preference!

Can do any damage with these correct? Just may not get the desired results ?

Share this post


Link to post
Share on other sites

You won't damage the gun with any of these bullet weights. The point of impact will be slightly different and at short distances you will struggle to see the difference. The felt recoil is typically higher with lighter bullets but that also depends on the powder charge behind them. 9mm is often considered "snappy", more so with the lighter, higher velocity rounds.

Lighter bullets are cheaper due to less lead in them so its a case of you pays your money and take your choice. Try them out and see what you like. 147gn and higher pays dividends if you get to shoot suppressed as they are usually subsonic.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
×
×
  • Create New...