tony357

The new windshield frame does not come with roll bar mounts in top, had to drill it out and install nut inserts to bolt the roll bar back on.

Started new project, picked up jeep CJ7 for off road driving may even put it in wicked rides show. needed quite bit of work, windshield frame was rotted, purchased new frame and windshield, getting the glass to fit with seal is tough, just put new glass on top of old glass and it is about 3/8 longer than old glass im sure this is the issue. steering column was bad so I replaced it with CPP tilt column also had to replace steering shaft with new column. Mt tires and new rims 31x12.50x15 steel D ring rims black. saved the aluminum rims that were on it they are nice rims but were too wide storing them with the micky Thompson street tires that are on them. Transmission pan had broken bolt and was leaking, removed broken bolt replaced pan gasket and filter installed all new bolts in pan. flywheel cover was missing replaced that. repaired wiring to tail lights, and horn. installed new starter old starter was grinding and was shimmed to work, replaced it with new mini wet magnet starter o shims needed. Replaced soft top windows old ones were stiff and rear was cracking. Installed EAG front bumper with driving lights and 9500lb winch. led light bar on front bumper mount, two led spot/flood lights on windshield hinge. Changed diff fluids, trans and transfer case. took it for 1st ride down to Tuckerton beach, was cold with no windshield. LOl.. powered by 350 chevy crate motor. Has fiberglass tub and original steel nose.

Nice, did good job cleaning it up. Friend of mine has one that has been in his family long time.

That's not cool man..

This is part of the problem, I see this today with new outboards emission friendly ( Fuel not electric) the technology is very expensive so buying and having payment plan allows owner to purchase but once it is out of warranty owners cannot afford to repair them then the boat sits in driveway while they make the payments and do not use it. Cannot sell it because it does not run I can see this happening with EV'S. Until they become cost effective it will be a niche product.

I understood that, but there is so much fail here it hurts to read.

it is in good shape for being officers gun I don't see much holster wear. My dads duty revolver was model 10.

Jim read through there website, http://www.n-ssa.org/join-a-team if you have the time this could be a lot of fun. I am thinking replica Musket with flint lock. your bit younger than me but in 6th grade they use to do a reenactment in the assembly room and they would actually shoot a musket off on stage with cotton ball. Those were the days school would actually bring in live weapon and shoot it off on stage.

This could be fun outing, You should have some fundamentals from history class. I think if you go online and search you should be able to find a lot of info. someone on the forums does the reenacting of civil war era maybe if still on the forums he can chime in. I forget who it was but maybe search this forum for it.

They probably did not have all the info. It is messed up That this can happen but it does and this dept seems to have black cloud.

Here is full story, two officers shoot suspect with fake gun, while exiting the building another officer shoots both of the officers. But yet they some how blame the perp on the mistaken identity of the friendly fire. https://www.news4jax.com/news/national/nypd-detective-killed-in-friendly-fire-incident-commissioner-says

That is not uncommon from NYPD especially if concrete walls were around. When it comes to gun play these guy's sometimes have hard time controlling themselves.

Remington R-1 carry commander CT. .45 acp, Desantis scorpion 2 IWB.

28 gauge skeet shooting 1st outing. IMG_3335.MOV

I shoot top barrel 1st, I use skeet and IC for all my bird hunting. over dog I use 20ga and 12 for tower shoot, duck hunting over decoys I use ic and modified 12ga also. I just picked up 28 ga for bird hunting over dog going to use skeet and IC for that also and see how I make out.

I would just buy dedicated 22. unless you really want it on glock frame. I have one for my 1911 but today with all the 22 1911's I would go that route.

I switched from snap-on to dewalt 3 years ago still using my 1/2 dewalt use almost every day 18 volt. have the 1/2 drill and 1/4 impact for screws. buddy just bought 20 volt end of last summer it has more power but also larger price tag. im thinking of switching to the 20 volt I have 8 batteries and one wont charge which means the rest will follow in suit but 4 are original 4 are one year newer so it may be another year.

several times I have posted I will take it and even had private messages for pick up and then was told hey sold it to someone else. this recently happened again in the past two weeks. I had stopped buying while back and happened again only after couple transactions. I think in that aspect it would be good.

This is right one. Knew I saw when I was looking at 2.0 traps. https://www.opticsplanet.com/champion-traps-and-targets-wheely-bird-workhorse-wobble-base.html http://www.championtarget.com/traps/trap_accessories/wobble_base_trap_attachment.aspx

hopefully another 50 years. https://www.opticsplanet.com/champion-traps-and-targets-easybird-traps.html?utm_source=bing&utm_medium=PLA&utm_term=&utm_campaign=4585307086333133&msclkid=1fdb5a8630b2192c9ee806a21a79dcc3&_iv_code=QG-T9-CBFDBA-40913

I am going to mount motorcycle battery to it, 330 CCA AGM I think it will go the distance and I do have solar battery charger panels that can be set up to run. I have a 3 amp panel with regulator that would be good to add if needed. Zeke yes good info. They have come out with the wobbler.

Mikey shooting left hand G4 12GA 1oz 8 shot. wheelie bird 2.0 IMG_3332.MOV

Purchased the new and improved wheelie bird 2.0 took it out for a test run today. works great I ran it off of one of my shop batteries, I think this could be run off a agm 30 series motorcycle battery. I may buy a 30 series and try it I would like to incorporate it into the unit so it is not separate. VID: 28 GA O/U ammo 8 shot 3/4 ounce wheelie bird 2.0 being activated by wireless remote. IMG_3335.MOV

we should call a constitutional attorney in texas to fight Sheila Jackson and start a go fund me page to stop her. What do you all think? To me this is a new version of Tyranny, passing legislation to stop Americans.

Sheila Jackson is taking action to stop Amercan people from financial support to build the wall. Quote from article. Texas Democratic Rep. Sheila Jackson Lee on Wednesday introduced House Resolution 7332, which would “prohibit taxpayer funds from being used to build a wall between Mexico and the United States, and for other purposes.” https://jobs-post.blogspot.com/2018/12/democrats-take-action-to-stop-citizen.html?m=1&fbclid=IwAR1sD1F2_bxs4mBFKQzGLSOznp-oe-X7ZwcVjWJ3O5VF-Dj7sV6VwGV3eX4