Jump to content

Recommended Posts

I am trying to decide if getting a home based FFL would be a worthwhile way of making some side income and helping me get my hands on some NFA items.

In my research I came across this article about how to Get a FFL without a Business License.

has anybody done this?  the more I look into it the more it seems like too much of a headache for the small amount of money I might earn.

Share this post


Link to post
Share on other sites

That company is giving bad advice and trying to sell a service you don't need.

If you are making money selling or transferring guns you will need to set up a business entity of some sort - which will include collecting and paying sales tax to the state.

Most if not all distributors will not give you an account to buy from them without an EIN and a sales tax certificate.

You will need correct zoning at your house that allows retail sales of firearms or you will need to get a variance to do so. Getting a variance typically involves notifying any property owner within a certain distance of your property (typically 200-250 feet) that you are tying to change the zoning for your property. They (and anyone else) will have a chance to speak at a zoning board meeting as to whether or not they like the idea of you running a gun shop from your house.

Paying the $500 a year SOT to deal in NFA items will only let you deal in AOW firearms in NJ to NJ residents. Since suppressors and SBR/SBS firearms are banned outright in NJ you will not be able to possess them as an "inventory" item. Fullauto business would only be to buyers outside NJ since NJ doesn't give out NJ Machine Gun Licenses.

There is a lot more I could get into, but if you want to get an FFL you are going to need to be all in with it.

 

-

Share this post


Link to post
Share on other sites

In addition to the good advice given in the previous post, there was an individual, who was an active member of this forum,  who was attempting to get his FFL a few years right around the time the Fauci Fungus started.  He chronicled his journey, detailing his dealings with the local zoning board, ATF, and the NJSP.

He might be able to give insight from his perspective.

Just a thought.

Share this post


Link to post
Share on other sites

You have to be nucking futz to open an FFL with out at least a LLC. 

On 7/9/2023 at 10:36 AM, Oakridgefirearms said:

That company is giving bad advice and trying to sell a service you don't need.

If you are making money selling or transferring guns you will need to set up a business entity of some sort - which will include collecting and paying sales tax to the state.

Most if not all distributors will not give you an account to buy from them without an EIN and a sales tax certificate.

You will need correct zoning at your house that allows retail sales of firearms or you will need to get a variance to do so. Getting a variance typically involves notifying any property owner within a certain distance of your property (typically 200-250 feet) that you are tying to change the zoning for your property. They (and anyone else) will have a chance to speak at a zoning board meeting as to whether or not they like the idea of you running a gun shop from your house.

Paying the $500 a year SOT to deal in NFA items will only let you deal in AOW firearms in NJ to NJ residents. Since suppressors and SBR/SBS firearms are banned outright in NJ you will not be able to possess them as an "inventory" item. Fullauto business would only be to buyers outside NJ since NJ doesn't give out NJ Machine Gun Licenses.

There is a lot more I could get into, but if you want to get an FFL you are going to need to be all in with it.

 

-

I thought there was no regulations on 02 and 03 SOT as an 01 or 07 FFL. You can still sell and bid on state contracts for NFA and sell to LEO and transfer out of state stampable items?

As an 07, you would need a NJ manufacturer license, too. 

Share this post


Link to post
Share on other sites
55 minutes ago, JackDaWack said:

You have to be nucking futz to open an FFL with out at least a LLC. 

I thought there was no regulations on 02 and 03 SOT as an 01 or 07 FFL. You can still sell and bid on state contracts for NFA and sell to LEO and transfer out of state stampable items?

As an 07, you would need a NJ manufacturer license, too. 

Since I don't have the SOT for NFA I cannot say for sure, but my understanding is that in NJ such a dealer can only deal in suppressors or SBR/SBS items on a special order basis when they are specifically ordered by a LE agency.

From what I recall, one section on the NJ criminal code bans all suppressors without exception and a different section says they are also banned but exempts LE agencies & military. Another example of two NJ laws conflicting with each other...........

A few years back I was at one of the seminars the ATF and NJSP run for dealers every so often. One of the State Troopers was talking about how a suppressor manufacturer had asked them if they were permitted to come to NJ to demonstrate suppressors for LE agencies at a range. It seems the consensus was to hold the demonstration in PA and have interested parties travel there since it wasn't clear whether it was legal to do so in NJ.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
    • And, charging your car at home? We've got you covered! California braces for new electric plan: Make more, pay more | Fox Business
×
×
  • Create New...