Jump to content
Sign in to follow this  
Followers 0
jackandjill

Rust on spent casings ?

By jackandjill, in Ammunition & Reloading

Recommended Posts

jackandjill    683

jackandjill
Posted

So I have bunch of 9mm and 556 spent casings from last year. They have been in a open container in the garage for a year.

Some have white/greenish bubbles and others (specially 9mm) look like complete rust (brown).

 

When I scratch these white/green powdery bubbles, they expose copper like metal area.  Are casings made of copper with brass coating ?

 

I thought brass casings dont go bad.  Is something wrong with the casings or the way they were stored open in garage ? 

Share this post

Link to post
Share on other sites

T Bill    649

T Bill
Posted

Everything oxidizes when exposed to some level of moisture.  Brass will show white and green like the Statue of Liberty.  Toss them in the tumbler and clean them up GTG.  Brown rust-like on brass is tarnish.  Same rules as oxidation.  Rarely will the brass be no good after exposure for a year in the garage.  Brass is made of copper and zinc.

Share this post

Link to post
Share on other sites

raz-0    1,259

raz-0
Posted

Brass is copper and zinc. If you have serious brown spots, and they remain after tumbling, it is likely a spot where the zinc was leeched out and the cartridge is no longer as strong. It is one of the reasons in not fond of wet tumbling with steel media and lemishine. It can hide such issues.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Recently Browsing   0 members

    No registered users viewing this page.



  • NJGF/SlavGuns Gun Giveaway!

    Ruger65Grendel.jpg

     

  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • leahcim
      The Tax Man Commeth

      By leahcim · Posted

      We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • Krdshrk
      Softer Holster

      By Krdshrk · Posted

      I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • silverado427
      Daily humor thread

      By silverado427 · Posted

      The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • maintenanceguy
      Softer Holster

      By maintenanceguy · Posted

      I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Mr.Stu
      Light primer strikes

      By Mr.Stu · Posted

      Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...