TokenEntry

Why not put more holes into the same target with the same round so they bleed out faster? Regards, TokenEntry

Can always send them a bag of dicks with your thoughts attached. https://dicksbymail.com/ Regards, TokenEntry

Has anyone actually sat down and estimated the cost of manufacturing one of these devices? Regards, TokenEntry

Oh, that's what I call a thread drift. Appropriate action taken considering that this thread isn't under the 1st Amendment Lounge. Regards, TokenEntry

Was there a post in this thread that was offensive towards our NJ AG that was removed? I don't see how such a post could relate to the topic at hand. Regards, TokenEntry

Going by the article, it seems to be isolated to these 2 counties in FL., Broward and Pinellas. Broward county should come as no surprise since it's part to Debbie Wasserman Schultz's district.

I was reading this on TGT forum on Monday. Within the thread there is a link to FOX News article. Link - Texas Gun Talk post Regards, TokenEntry

Only for the libtard Millennials as it is 4.9 secs too late for instant gratification. Regards, TokenEntry

There are probably two ways to access the site if you are in NJ . . . 1 - Use a VPN 2 - Use a proxy server address in your web browser settings. https://www.us-proxy.org/ Regards, TokenEntry

Came across this video by sootch00 on his SensiblePrepper channel. Olight having a 4 day Flash Sale. Video and link below to Olight. Link - Olight Flash Sale page Regards, TokenEntry

Just finished watching the movie. I found it to be very slow moving right up until the end. Anyone wanting to watch this online you can refer to the link below. The rating for this movie was kinda low and after watching it I tend to agree with the reviews. Link - http://www2.0123movies.org/watch/siberia-2018-online-123movies.html Regards, TokenEntry

Copy and paste of article by thefirearmblog.com below. Link - thefirearmblog.com article ZEV and Mega Arms Announce Merger Posted February 1, 2017 in Companies, News, Press Releases by Scott F with 18 Comments Tags: ar-15, glock, Mega, News, ZEV ZEV Technologies, a company known for their custom, high-end GLOCKs, GLOCK parts, and accessories and Mega Arms, a manufacturer known for their AR-15 rifles, parts, and accessories today announced a merger of the two firearm companies. The ZEV/Mega press release included the tidbit that the president of Mega Arms, Mike Miller, will immediately take control of both ZEV and Mega brand’s manufacturing processes. The press release also indicated there would be no significant changes to the two brands and that neither of the company’s product lines will significantly alter any time soon. No other inside information was announced at the time of this particular press release. Follow the The Firearm Blog News Channel This merger announcement comes just three months after ZEV, an Oxnard California based company announced expansion to Centralia, Washington, the home of Mega Arms and also a few days after ZEV displayed an AR-15 trigger called the SSR at SHOT 2017. The best part of this announcement was a comment one astute observer made back in October on the ZEV Tech’s Facebook page after they announced the move to Washington. Assuming he had no insider info on the merger he needs to start some day trading. You can read the details for yourself at ZEV Technologies website, (but oddly not at the Mega Arms http://www.zevtechnologies.com/assets/press-releases/ZEV_PressRelease_ZEV-MEGA.pdf I have no experience with the Mega lower receivers personally, but thought them to be of good quality from reviews by others that I've have read. However, there are some individuals over at AR15.com that feel a little different toward the merger. Link - https://www.ar15.com/forums/general/In-other-bad-news-it-appears-that-ZEV-has-gutted-teh-Mega-Arms-line-/5-2037982/ Regards, TokenEntry

I like the sides that both places offer, but prefer the chicken more at Popeyes. I wish Roy Rogers was still around or one that is close by. Regards, TokenEntry

I should have clarified if certain dealers are selling products below their MAP pricing, will Trijicon honor the warranty? I don't think that the mfgs would go after the consumer end if the said dealer is not following their agreement. However, I was curious if anyone had encountered such a thing? EDIT: Disregard. I'm probably confusing Unauthorized Dealers as dealers selling below MAP pricing. Regards, TokenEntry

Here's a question . . . Will Trijicon honor warranties if you purchase their product from unauthorized dealers? If not, this might explain why prices are cheaper through "Gray Market Dealers". Regards, TokenEntry

AFAIK, green tip, M855, is still legal. However, finding a range that allows you to shoot it may be a problem though. Regards, TokenEntry

My pistol was purchased in the late 1990's and was made in Italy. It was labeled as a stainless steel version which is now known to be the INOX. No comment on the guide rod as mine already came with the non-capture steel version when I bought it. Link - Beretta Technical Data Regards, TokenEntry .

As per the title, Brownells is offering free shipping with minimum on orders again up until 07/20/2018. Use CODE MFT.

Here's a video just put out by Mrgunsngear regarding the POST recall upgrades done on the Sig P320. It's very good review of each of the changes done by Sig Sauer. Regards, TokenEntry

I'm not sure how I would feel working for a company that had fired me and was forced to rehire me back due to bad PR they received. Good news for Dean Crouch as not many people may have options available to them. Link - WCTV article Regards, TokenEntry

Regards, TokenEntry

This is a document provided by Artic Silver company with their instructional method to use when applying their product. On the bottom of page 3 there is a warning not to touch the compound with your finger during the application. I take this as a precaution by the manufacturer like I do with other things. Some things you can get away with and some things you can't. Just for the record. No, I've never heard of anyone having issues with their PC when they used their finger when they applied thermal compound to their CPU. Link - Artic Silver instructions intel_app_method_vertical_line_v1.1.pdf Regards, TokenEntry

In most cases where this is your first time ordering it does take some time for your initial order to get shipped out. Subsequent orders placed after would most likely be shipped in a timely manner unless there's a big sale or ammo shortage happening. Regards, TokenEntry

I'll ask you to show me where applying thermal paste using your finger is the standard or is good business practice to do so. Go read any posts on gaming forums and see what posters have to say about such a thing. You think having 25 years makes one an expert? There are a lot of bad habits/practices that get picked up at the HelpDesk level due to what was taught to them by others early on in their career paths. If you're gonna work on your computer after gardening and not wash your hands, then expect to see bad results for not having common sense. I'd say 99% of the time you'd be fine with doing something like this. However, if you want to give advice to someone then you should not dismiss possibilities where other scenarios could create an issue. Also, I would not recommend using a razor blade inside the computer case if you don't take proper precautions like unplugging the PSU. Which is has a higher chance of applying thermal paste more evenly, your finger or a razor blade? Regards, TokenEntry

After reading some of the comments at the bottom of the article. Kinda amazing how some ignore the fact that this guy is a surgeon with very high credentials. Regards, TokenEntry