Jump to content
Sign in to follow this  
Jon

.22WMR Ammo comparison w/ Marlin 925 rifle

Recommended Posts

The last time I took my .22mag out to the 100yd range to see how well it could shoot the cheapo fiocchi ammo that I had, resulted in more of a "pattern" than a "group". I decided I needed to get some new ammo, and find out if the rifle was crap, or if it was just the ammo. The Marlin 925 is all stock, with a bipod, and Bushnell Rimfire scope package. I started off with a clean gun, and fired 5 rounds of each brand of ammo. After each 5-shot group, I let the barrel cool for 5min, and ran a boresnake through it. Here are the results:

 

Fiocchi 40gr JHP:

IMG_20110602_113602.jpg

 

Remington 40gr JHP:

IMG_20110602_113624.jpg

 

CCI HP-V 30gr JHP:

IMG_20110602_113657.jpg

 

Hornady V-Max 30gr polymer tip:

IMG_20110602_113642.jpg

 

The Hornady ammo shot very, very well, and would have been a 5/8" group if I hadn't shanked the one shot.

IMG_20110602_145525.jpg

IMG_20110602_145542.jpg

 

A second group of the Hornady, measuring 1".

IMG_20110602_145635.jpg

 

P7010417.jpg

 

All in all, I feel the rifle/ammo combo is capable of sub-moa, which is pretty impressive for such a cheap gun. :icon_mrgreen:

Share this post


Link to post
Share on other sites

Very nice. Recalling your post as inspiration, I recently picked up 7 different ammo's for my Savage 22mag to try a similar test. I shot each at 25 then 50 to see how the groups would open up. 25 was hard to tell apart the premium ammo's but at 50 they started to show thier qualities. I tried host of 40gr and 30gr loads and categorically, the 30gr loads were all much tighter (and naturally faster--i chrono'd them all at the same time). I had nice groups with the hornady 30gr VMax, cci 30 gr and also the Federal TNT 30gr loads with the Federal and Hornady producing the tightest groups consistently. Honorable mention went to Winchester Supreme 34gr for a budget load since it shot one rather tight group but it just wasn't consistent enough. I've got pics of the targets/groups if you're interested.

Share this post


Link to post
Share on other sites

Very nice. Recalling your post as inspiration, I recently picked up 7 different ammo's for my Savage 22mag to try a similar test. I shot each at 25 then 50 to see how the groups would open up. 25 was hard to tell apart the premium ammo's but at 50 they started to show thier qualities. I tried host of 40gr and 30gr loads and categorically, the 30gr loads were all much tighter (and naturally faster--i chrono'd them all at the same time). I had nice groups with the hornady 30gr VMax, cci 30 gr and also the Federal TNT 30gr loads with the Federal and Hornady producing the tightest groups consistently. Honorable mention went to Winchester Supreme 34gr for a budget load since it shot one rather tight group but it just wasn't consistent enough. I've got pics of the targets/groups if you're interested.

 

Good stuff! I'd love to see pichers.

Share this post


Link to post
Share on other sites

Jons- Both of you....

 

Nice job and you are giving me some faith in forum members as you are doing controlled testing. It's nice and rewarding isn't it?

 

Sometimes I think the forum is full of "Wolf steel cased ammo wasters". But not you guys! Good Job Again...

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...