Jump to content
Sign in to follow this  
RUTGERS95

chimney help

Recommended Posts

My chimney, on windy days, has smoke coming back into the great room.  I know it's downdrought or something like that but where can I find a product close by to fix this?  I saw this but it's in England; http://www.stovesonline.co.uk/wood_burning_stoves/Chimney-Cowls.html

 

I looked at Home depot's and Lowe's site but found only caps etc.

 

anyone know?

Share this post


Link to post
Share on other sites

go to an HVAC supply house they make something similar. chances are you wont find it in the big box but they do have chimney caps local. I had to add one when i did the new heat in my house along with a liner. I think i got it thru Ferguson in Lakewood.

Share this post


Link to post
Share on other sites

thanks....I know it's because the chimney is too low vs the other one as this room was added on and how our house sits the wind comes down around on it (if that makes sense)    I saw online there are products for this but nothing close and nothing that is reasonable to order online. 

Share this post


Link to post
Share on other sites

go to an HVAC supply house they make something similar. chances are you wont find it in the big box but they do have chimney caps local. I had to add one when i did the new heat in my house along with a liner. I think i got it thru Ferguson in Lakewood.

just noticed Colonia....my wife is from Colonia....

 

I will see what they have at a hvac place this weekend.....frustrating

Share this post


Link to post
Share on other sites

http://www.woodlanddirect.com/Chimney/Top-Sealing-Chimney-Dampers/Lock-Top-Chimney-Cap-Damper

 

I got one 2 years ago and my family room has been warmer than ever.  It used to be an icebox.

thanks but I need one that prevents the downdraft when winds are high

Share this post


Link to post
Share on other sites

There are several causes of this.   The most common cause is lack of makeup air.  A chimney can't draft properly if there isn't fresh air coming into the room to replace the air moving up the chimney.   If the makeup air is just barely adequate a little puff of wind will change things.   Try cracking a window a few inches and see if the problem goes away.

Share this post


Link to post
Share on other sites

There are several causes of this.   The most common cause is lack of makeup air.  A chimney can't draft properly if there isn't fresh air coming into the room to replace the air moving up the chimney.   If the makeup air is just barely adequate a little puff of wind will change things.   Try cracking a window a few inches and see if the problem goes away.

 

If his house is a multi-story, and the fireplace is on a lower story, then it's quite possible the pipe doesn't vent quite high enough.  When you have a lower story next to a higher story, there is a positive pressure zone created on the lower story when the wind is blowing across the lower onto the upper story.   Simply adding 1-3 feet of liner might solve the problem entirely.

 

How do I know this?  As part of my 2012 renovation, I had to extend my stone chimney about 6 feet.   Code only required roughly 5 feet, but the architect explained the dynamics to me since we added a second story to the back of the house and the chimney is on the front.  He did the math and said we needed a bit more to get out of the positive pressure zone to prevent down drafts...haven't had any yet.

Share this post


Link to post
Share on other sites

Is the chimney stainless double or triple wall? Or masonry? If its stainless just add a section or two to get it up higher. Code says it must exceed the peak of the roof by 2' and must be a minimum of 10' from a higher roof or it must exceed the peak of that roof by 2'.

 

Sent using Tapatalk 2 NOW FREE!!!

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • We never let then inside.  Last re-evaluation was 6-7 years ago, wife politely told him that he was welcome to look around the property and he could look in the windows. He saw two white resin chairs in the basement and told her that this constituted a finished basement. And everything in the basement is bare concrete/ cinder block, and mechanical systems. Nothing finished about it. Ultimately he relented and I'm sure that was a ploy to coerce us to allow him in
    • I use an Alien Gear cloak tuck (IWB) with my Shield.  Neoprene back - in the summer it does feel warm but doesn't rub or chafe.   https://aliengearholsters.com/ruger-lcp-iwb-holster.html Could also go with the shapeshift as it has multiple options - OWB/IWB, Appendix... https://aliengearholsters.com/ruger-lcp-shapeshift-modular-holster-system.html
    • The  12-1 compression ratio L88 is long gone. This is GM's updated version. it might be  pump gas 10-1 engine The L88 was a aluminum head  cast iron block engine with a nasty solid lifter cam. the  ZL1 was a all aluminum  12 or 13-1 compression ratio engine with the best forged internal parts at the time and had a even nastier solid lifter cam 
    • I like my regular carry holster.  OWB leather with belt slots.  I've been carrying for over a year and it was comfortable and I hardly even noticed it.  I carry (usually) a Ruger LCP .380 - light, convenient, tiny. But...today I ended up taking it off an leaving it home after a few hours. I cut down a big maple tree a few days ago and I spent 3/4 of today loading and unloading firewood into the back of my truck and a trailer.  It was a warm day, I was dirty, tired, sweaty, and my holster was rubbing against my side.  The leather and exposed metal snap was no longer comfortable. I'm thinking about adding a layer of something to that part of the holster to soften the contact.  Anything insulating will make it worse.  I don't want a sweaty, hotter holster against my skin.  I'm imagining something thin, breathable, that won't absorb sweat, and softer than leather, metal snaps, and rivets.   But I have no idea what would work. I'm hoping somebody else has already figured this out and I can just do what they did. Any suggestions appreciated.
    • Check the primers on the ammo you didn't shoot yet. Are they fully seated? If the primer is not just below flush with the back of the case, the first hit can seat it better then the second hit ignites it. 
×
×
  • Create New...